2018-03-22, 00:56
Thanks... wasn't sure based on your posts here and OSMC forum. Glad to hear it remains in play, but have you made a decision on support for Kodi 17 and plans for 18?
(2018-03-22, 00:56)hdmkv Wrote: Thanks... wasn't sure based on your posts here and OSMC forum. Glad to hear it remains in play, but have you made a decision on support for Kodi 17 and plans for 18?I'm not sure how I missed this. Apologies.
(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Will this autoswitching be not only for colour spacing, but also bit depth?
(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Yes - it's definitely important to be able to play SDR Rec 2020 content in Rec 2020, and not assume all Rec 2020 content is HDR10 and flag it as such. (This will also help when playing HLG Rec 2020 HDR stuff if the S905X can't flag HLG over HDMI. Outputting it as SDR and then manually switching your TV from SDR to HLG HDR will solve that problem, but it won't if the Rec 2020 is output flagged as Rec 709, or crudely converted to Rec 709). In other words, output the two different colour gamut formats as-is, or convert non-compatible sources if the display can't handle that colour gamut?
MVC playback now works in TB or SBS. So users will get that at the least.
We have added an option for full output, but doesn't seem to work on all displays with our testing.
Sam
(2018-04-09, 12:44)lstar337 Wrote: The remote for the Wetek is quite nice and it still works so I would like to be able to use it with the Vero box if possible.Yes it is a nice simple Wireless remote.
Quote:but I would like to turn the box on and off with the IR part just like the Wetek core does..Off / On might be difficult on AMlogic devices because that usually uses Infra Red and each AML box has the IR Off / On Signal hardcoded into it's bootloader. It's not user configurable.
(2018-04-09, 13:26)wrxtasy Wrote:Yeah I already ripped out the remote dongle. I figured that if the Wetek box was dead (not happy about that after only 28 months!) then at least I could salvage the remote!(2018-04-09, 12:44)lstar337 Wrote: The remote for the Wetek is quite nice and it still works so I would like to be able to use it with the Vero box if possible.Yes it is a nice simple Wireless remote.
My suggestion is to open up the busted WeTek Core box and pull out the USB Mini WiFi receiver dongle that is plugged into an internal USB port.
You can then use that with pretty much any media player you want. Just Plug the WiFi dongle into a new box and you should be good to go !
Quote:but I would like to turn the box on and off with the IR part just like the Wetek core does..Off / On might be difficult on AMlogic devices because that usually uses Infra Red and each AML box has the IR Off / On Signal hardcoded into it's bootloader. It's not user configurable.
The Vero 4K does have a Standby Mode that works well, you have to select that from Kodi's Power Menu. Then you simply tap a remote button to wake up the box.
(2018-04-09, 13:54)lstar337 Wrote: P.S. I don't suppose you have any thoughts on a Wetek box that wont even show a splash screen? Wetek wanted me to send it to Slovenia without any indication of cost for a fix!If it does not even show a LibreELEC splash screen then it's likely dead.
(2018-04-09, 14:08)wrxtasy Wrote:I don't even get a Wetek splash screen, let alone a LibrELEC one! Just black and nothing else. I just wish they would let me flash it myself, even without the HDCP because I never even used the Android side!(2018-04-09, 13:54)lstar337 Wrote: P.S. I don't suppose you have any thoughts on a Wetek box that wont even show a splash screen? Wetek wanted me to send it to Slovenia without any indication of cost for a fix!If it does not even show a LibreELEC splash screen then it's likely dead.
On the Android side if HDCP keys get corrupted you end up with a black boot screen that is non-recoverable. Back to the factory it has to go.
(2018-04-09, 11:58)Theetjuh Wrote:The plan is to do it for colour primary (BT709/BT2020) and bit depth.(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Will this autoswitching be not only for colour spacing, but also bit depth?
Is this something that can be enabled with downgrading resolution switching as well?
(2018-04-09, 12:31)noggin Wrote:I don't plan to parse the EDID yet; just offer some manual settings for now to cover most scenarios. As I have a better understanding of corner cases and people's setups, I expect to refine things a little more over time. The bandwidth limitations (based on frame rate) is indeed something to consider, and I suspect will cause some confusion if people think that the device is outputting the 'wrong' signal.(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Yes - it's definitely important to be able to play SDR Rec 2020 content in Rec 2020, and not assume all Rec 2020 content is HDR10 and flag it as such. (This will also help when playing HLG Rec 2020 HDR stuff if the S905X can't flag HLG over HDMI. Outputting it as SDR and then manually switching your TV from SDR to HLG HDR will solve that problem, but it won't if the Rec 2020 is output flagged as Rec 709, or crudely converted to Rec 709). In other words, output the two different colour gamut formats as-is, or convert non-compatible sources if the display can't handle that colour gamut?
MVC playback now works in TB or SBS. So users will get that at the least.
We have added an option for full output, but doesn't seem to work on all displays with our testing.
Sam
When it comes to bit-depth - presumably you need to have an automatic mode that choses the best based on EDID - and some manual over-rides?
Because of the confusion inherent in the HDMI 2.0 specs (2160p 4:2:2 being 12-bit only, 4:2:0 and 4:4:4 offering 8-bit, 10-bit, 12-bit and 16-bit at different frame rates) it may be sensible to annotate the options. I can imagine lots of people thinking that selecting 4:2:2 12 bit output is 'wrong' for 10-bit content, but it is the only 4:2:2 bit-depth supported. It may also be worth having options for <30p UHD and >30p UHD? (Or at least listing them?)
(2018-04-09, 12:44)lstar337 Wrote: Sam, will the Vero 4K be able to learn IR signals?The Vero 4K can learn IR signals. I believe the WeTek remotes are NEC based (use amremote); so you'd probably need to record an LIRC profile if one doesn't exist already. Vero 4K has a standby mode which can be used via the Power menu. This behaves a little differently to what you'd be used to on the WeTek, but the effects are similar.
My Wetek Core has just died and is probably not economical to repair so I am looking for a replacement. The Vero looks like it ticks all the right boxes.
The remote for the Wetek is quite nice and it still works so I would like to be able to use it with the Vero box if possible. I know the Vero will be fine with the wireless part as that all works with the Rpi3 build of OSMC that I am currently testing (congrats on how silky smooth that is btw), but I would like to turn the box on and off with the IR part just like the Wetek core does.
This is really just to keep it family compatible. They mostly dislike change (we have a daughter with sensory issues and autism traits), so keeping a familiar remote will help a lot.
Thanks for your time.
(2018-04-09, 11:58)Theetjuh Wrote:Forgot to address one of your points. I will revisit the downgrade on resolution option again in the near future. There were a couple of issues that prevented it being a candidate for release; but the plan is to revisit when time permits.(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Will this autoswitching be not only for colour spacing, but also bit depth?
Is this something that can be enabled with downgrading resolution switching as well?
(2018-04-09, 17:29)Sam.Nazarko Wrote:Thanks for your reply Sam.(2018-04-09, 11:58)Theetjuh Wrote:The plan is to do it for colour primary (BT709/BT2020) and bit depth.(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Will this autoswitching be not only for colour spacing, but also bit depth?
Is this something that can be enabled with downgrading resolution switching as well?
I will start with primaries however; and add a GUI setting for this.
(2018-04-09, 12:31)noggin Wrote:I don't plan to parse the EDID yet; just offer some manual settings for now to cover most scenarios. As I have a better understanding of corner cases and people's setups, I expect to refine things a little more over time. The bandwidth limitations (based on frame rate) is indeed something to consider, and I suspect will cause some confusion if people think that the device is outputting the 'wrong' signal.(2018-04-09, 01:36)Sam.Nazarko Wrote: Plan is to make autoswitching available only when necessary. The colour space options are good but can cause problems when playing BT709 material. So we are planning to switch when necessary and only if supported; as we have now decoupled colourspace and HDR since the March update (which was a limitation on AML before).Yes - it's definitely important to be able to play SDR Rec 2020 content in Rec 2020, and not assume all Rec 2020 content is HDR10 and flag it as such. (This will also help when playing HLG Rec 2020 HDR stuff if the S905X can't flag HLG over HDMI. Outputting it as SDR and then manually switching your TV from SDR to HLG HDR will solve that problem, but it won't if the Rec 2020 is output flagged as Rec 709, or crudely converted to Rec 709). In other words, output the two different colour gamut formats as-is, or convert non-compatible sources if the display can't handle that colour gamut?
MVC playback now works in TB or SBS. So users will get that at the least.
We have added an option for full output, but doesn't seem to work on all displays with our testing.
Sam
When it comes to bit-depth - presumably you need to have an automatic mode that choses the best based on EDID - and some manual over-rides?
Because of the confusion inherent in the HDMI 2.0 specs (2160p 4:2:2 being 12-bit only, 4:2:0 and 4:4:4 offering 8-bit, 10-bit, 12-bit and 16-bit at different frame rates) it may be sensible to annotate the options. I can imagine lots of people thinking that selecting 4:2:2 12 bit output is 'wrong' for 10-bit content, but it is the only 4:2:2 bit-depth supported. It may also be worth having options for <30p UHD and >30p UHD? (Or at least listing them?)
(2018-04-09, 12:44)lstar337 Wrote: Sam, will the Vero 4K be able to learn IR signals?The Vero 4K can learn IR signals. I believe the WeTek remotes are NEC based (use amremote); so you'd probably need to record an LIRC profile if one doesn't exist already. Vero 4K has a standby mode which can be used via the Power menu. This behaves a little differently to what you'd be used to on the WeTek, but the effects are similar.
My Wetek Core has just died and is probably not economical to repair so I am looking for a replacement. The Vero looks like it ticks all the right boxes.
The remote for the Wetek is quite nice and it still works so I would like to be able to use it with the Vero box if possible. I know the Vero will be fine with the wireless part as that all works with the Rpi3 build of OSMC that I am currently testing (congrats on how silky smooth that is btw), but I would like to turn the box on and off with the IR part just like the Wetek core does.
This is really just to keep it family compatible. They mostly dislike change (we have a daughter with sensory issues and autism traits), so keeping a familiar remote will help a lot.
Thanks for your time.
Sam