2013-05-04, 19:06
Hi Wolfgr & Teko,
Here's my boblight.conf
#[global]
interface 192.168.2.100
port 19333
[device]
name ambilight
type ws2801
output /dev/spidev0.0
channels 300
prefix 41 64 61 00 63 36
interval 20000
rate 48000
debug off
[color]
name red
rgb 0000FF
gamma 1.0
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 00FF00
gamma 1.0
adjust 1.0
blacklevel 0.0
[color]
name blue
rgb FF0000
gamma 1.0
adjust 1.0
blacklevel 0.0
Here's the video again to show the problem:
http://www.youtube.com/watch?v=sIgzR9tPTz8
I tried to pipe the output to the Popen.py script to adjust RGB values, this makes the color seem quite nice but the timing is even worse.
I also noticed that 4 LEDS are NOT working with this Boblight config.
The first led in the bottom left is working, then 4 are not working.
This is weird because when i do a boblight-constant they don't seem to work either.
Is there something wrong in my setup? I counted 100 LEDS , that's what i'm pretty positive about
Update: I've been testing with the ADAfruit LED pixel script and it seems that only the last led isn't working in this script
Here's a video:
http://www.youtube.com/watch?v=S_1c9OID2VQ
In XBMC (using boblight) the last 4 leds aren't working.
Here's my boblight.conf
#[global]
interface 192.168.2.100
port 19333
[device]
name ambilight
type ws2801
output /dev/spidev0.0
channels 300
prefix 41 64 61 00 63 36
interval 20000
rate 48000
debug off
[color]
name red
rgb 0000FF
gamma 1.0
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 00FF00
gamma 1.0
adjust 1.0
blacklevel 0.0
[color]
name blue
rgb FF0000
gamma 1.0
adjust 1.0
blacklevel 0.0
Here's the video again to show the problem:
http://www.youtube.com/watch?v=sIgzR9tPTz8
I tried to pipe the output to the Popen.py script to adjust RGB values, this makes the color seem quite nice but the timing is even worse.
I also noticed that 4 LEDS are NOT working with this Boblight config.
The first led in the bottom left is working, then 4 are not working.
This is weird because when i do a boblight-constant they don't seem to work either.
Is there something wrong in my setup? I counted 100 LEDS , that's what i'm pretty positive about
Update: I've been testing with the ADAfruit LED pixel script and it seems that only the last led isn't working in this script
Here's a video:
http://www.youtube.com/watch?v=S_1c9OID2VQ
In XBMC (using boblight) the last 4 leds aren't working.