[doveman2]

Still having major problems with my brother's Kworld Freeview tuner on his RPi v2.

I updated to #1204 with TVh #1205 and it works fine on my end, with just the tuner plugged into the RPi and an empty Belkin USB Hub. My brother's using an old composite TV though, so he can't use CEC and has to use a USB remote and would also quite like to use a USB flash drive for recording TV programmes.

My brother had the remote receiver and the flash drive plugged into his RPi and the tuner plugged into the hub. After updating him (and adding max_usb_current=1 to config.txt) the tuner wasn't visible. This is the dmesg.
http://pastebin.com/QkaUnsCz

Then I got him to plug the tuner directly into the RPi and put the remote receiver and flash drive in the hub, disconnect the hub and reboot. Then the tuner showed up in dmesg and in the TVh web GUI under Adapters. http://pastebin.com/xSsNTrSK

Then I got him to plug the remote receiver into the RPi and reboot and the tuner wasn't working again. http://pastebin.com/wauCpEt6

In all three instances dmesg shows "1-1.2: Product: DVB-T TV Stick" but after that the first and third tests show
usb 1-1.2: dvb_usb_v2: 2nd usb_bulk_msg() failed=-110
dvb_usb_af9035: probe of 1-1.2:1.0 failed with error -110

whilst the second shows:
usb 1-1.2: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135
usb 1-1.2: dvb_usb_v2: found a 'Kworld UB499-2T T09' in cold state
usb 1-1.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-01.fw'

and a lot more messages relating to the tuner. I've already sent him a spare tuner which I tested (as in fact I had the first one, with his RPi v2 before I gave it to him) so I'm sure the tuner isn't faulty but I haven't got a clue what's wrong and it's driving me nuts!