2009-02-02, 21:46
I have an Antec 430 EU (seems that they skipped the remote in this version). My USB-id is
Bus 001 Device 004: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller
I only get one device, /dev/lirc0, so not all of this applies to me. Let me try to summarize what I had to do on Ubuntu 8.10/2.6.27-11
Manually compiled lirc (0.8.3), but not sure that was necessary.
Using a mceusb configuration file for lircd.conf
Starting lircd in /etc/rc.local using only "lircd --device=/dev/lirc0"
Now the important bit for the LCD display, the kernel module option:
xbmc@htpc:~$ grep lirc /etc/modules
lirc_imon is_lcd=0
Let is_lcd equal 1 if you have the blue backlit display (this different LCD panel also has the ffdc-identifier).
LCDd compiled manually, 0.5.2, no patches, but configuration file must be fixed manually as described in other posts here.
Bus 001 Device 004: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller
I only get one device, /dev/lirc0, so not all of this applies to me. Let me try to summarize what I had to do on Ubuntu 8.10/2.6.27-11
Manually compiled lirc (0.8.3), but not sure that was necessary.
Using a mceusb configuration file for lircd.conf
Starting lircd in /etc/rc.local using only "lircd --device=/dev/lirc0"
Now the important bit for the LCD display, the kernel module option:
xbmc@htpc:~$ grep lirc /etc/modules
lirc_imon is_lcd=0
Let is_lcd equal 1 if you have the blue backlit display (this different LCD panel also has the ffdc-identifier).
LCDd compiled manually, 0.5.2, no patches, but configuration file must be fixed manually as described in other posts here.