2012-11-01, 19:07
Ah ok, first off, its as I suspected, your TV and most like all tv's are DFP-0
Use this for your TV specific. Ive corrected the xorg to match your TV including
HorizSync : 15.000-46.000 kHz
VertRefresh : 48.000-61.000 Hz
As for 1920x1080 Your Tv supports @60Hz interlaced only @50Hz non interlaced which @50Hz is what I defined.
your xorg complains
If the xorg above doesnt set your TV to correct 1920x1080 we may have to replace this
with this
You will need to reboot after each xorg modification for safe measure.
If it still doesn't work we can comment out
put a # before -Option-
I cant be sure that it fixes it but it could be your TV is very picky (it is) and has a crap upscaler
You could also upgrade your video drivers to 304.60 if you haven't already done that. (xswat ppa)
uNi
Use this for your TV specific. Ive corrected the xorg to match your TV including
HorizSync : 15.000-46.000 kHz
VertRefresh : 48.000-61.000 Hz
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.60 (buildmeister@swio-display-x86-rhel47-13) Sun Oct 14 21:19:18 PDT 2012
# Tweaked by uNiversal
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "DynamicTwinView" "false"
Option "NoFlip" "false"
Option "ConnectToAcpid" "0"
Option "ModeValidation" "NoVesaModes, NoXServerModes"
Option "UseDisplayDevice" "DFP-0"
Option "ConnectedMonitor" "DFP-0"
Option "ModeDebug" "true"
Option "HWCursor" "false"
Option "SWCursor" "false"
Option "RenderAccel" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "VertRefresh" "DFP-0: 15-36"
Option "HorizSync" "DFP-0: 48-61"
DefaultDepth 24
Option "ColorRange" "Full"
Option "ColorSpace" "RGB"
Option "ExactModeTimingsDVI" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 15 - 36
VertRefresh 48 - 61
# 1920x1080p 50Hz to 23.976Hz (EIA/CEA-861B)
Modeline "1920x1080_50" 74.25 1920 2448 2492 2640 1080 1084 1089 1124 +hsync +vsync
ModeLine "1920x1080_23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
Option "DPI" "96 x 96"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
As for 1920x1080 Your Tv supports @60Hz interlaced only @50Hz non interlaced which @50Hz is what I defined.
your xorg complains
Code:
[ 20.480] (II) NVIDIA(0): Validating Mode "1920x1080":
[ 20.480] (II) NVIDIA(0): 1920 x 1080 @ 60 Hz
[ 20.481] (II) NVIDIA(0): Mode Source: EDID
[ 20.481] (II) NVIDIA(0): Pixel Clock : 74.18 MHz
[ 20.481] (II) NVIDIA(0): HRes, HSyncStart : 1920, 2008
[ 20.481] (II) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200
[ 20.481] (II) NVIDIA(0): VRes, VSyncStart : 1080, 1084
[ 20.481] (II) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124
[ 20.481] (II) NVIDIA(0): H/V Polarity : +/+
[ 20.481] (II) NVIDIA(0): Extra : Interlace
[ 20.481] (II) NVIDIA(0): Mode (1920 x 1080) is too large for DFP Native Resolution
[ 20.481] (II) NVIDIA(0): (Max: 1280 x 720); mode will not be allowed to scale
[ 20.481] (II) NVIDIA(0): to the DFP's native resolution.
[ 20.481] (II) NVIDIA(GPU-0): BestFit Scaled and BestFit AspectScaled are identical;
[ 20.481] (II) NVIDIA(GPU-0): collapsing BestFit AspectScaled.
[ 20.481] (II) NVIDIA(GPU-0): BestFit Centered and BestFit Scaled are identical;
[ 20.481] (II) NVIDIA(GPU-0): collapsing BestFit Scaled.
[ 20.482] (II) NVIDIA(GPU-0): BestFit Centered 1920x1080
[ 20.482] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 20.482] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 20.482] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 20.482] (II) NVIDIA(GPU-0): Base Depth 32
[ 20.482] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 20.482] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 20.482] (II) NVIDIA(0): Mode is valid.
If the xorg above doesnt set your TV to correct 1920x1080 we may have to replace this
Code:
Modeline "1920x1080_50" 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
with this
Code:
[code]Modeline "1920x1080_60i" 74.18 1920 2008 2052 2200 1080 1084 1089 1124 +hsync +vsync
You will need to reboot after each xorg modification for safe measure.
If it still doesn't work we can comment out
Code:
Option "ExactModeTimingsDVI" "True"
I cant be sure that it fixes it but it could be your TV is very picky (it is) and has a crap upscaler
You could also upgrade your video drivers to 304.60 if you haven't already done that. (xswat ppa)
uNi