Posts: 6,810
Joined: Jul 2010
Reputation:
198
You should check README.ubuntu for required packages. Just copy/paste the command. If you run configure and don't have libvdpau-dev, vdpau gets deactivated.
Better run: ./configure --enable-vdpau
configure will fail if libvdpau-dev is not present.
Posts: 3
Joined: Jul 2011
(2012-05-17, 16:19)thrillerbee Wrote: $ cd /usr/src/
$ sudo git clone git://github.com/FernetMenta/xbmc.git
$ cd xbmc
$ sudo ./bootstrap; sudo ./configure; sudo make; sudo make install
Sorry, but the commands are not working:
User@XBMC:/usr/src/xbmc$ sudo ./bootstrap; sudo ./configure --enable-vdpau; sudo make; sudo make install
./bootstrap: 5: autoreconf: not found
sudo: ./configure: command not found
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
Posts: 232
Joined: Feb 2012
Reputation:
2
2012-05-18, 20:02
(This post was last modified: 2012-05-19, 01:05 by VanillaXtract.)
I believe he is telling you to read the readme.
EDIT: Sorry. Not you FernetMenta but fldc. @TheSane. After you do the get there will be a readme.ubuntu. Follow the steps in there to download all the packages you need. Then follow everything in readme.linux. If you get all those packages your not found errors will go away. As a warning, a couple of the packages you will need to specify a different version than what the default is.
Living Room: Ubuntu 16.10 x64 | BayTrail-M SOC | Krypton | Hitachi 55L6 | Yamaha RX-V665 | 7.1 Polk Surround
Den: RetroPie 4.1 | Raspberry Pi 3 | Krypton | VIZIO XVT553SV
Bedroom: OSMC 2017.02-1 | Raspberry Pi 3 | Krypton | VIZIO E370VA
HP Chromebook 14: Ubuntu 16.04 x64 | Celeron 2955U | Jarvis
NAS: Windows 10 | 20TB on DrivePool | Emby DB | Subsonic | Plex
Posts: 232
Joined: Feb 2012
Reputation:
2
$ cd /usr/src/
$ sudo git clone git://github.com/FernetMenta/xbmc.git
$ cd xbmc
$ sudo apt-get install git-core make g++ gcc gawk pmount libtool nasm yasm automake cmake gperf zip unzip bison libsdl-dev libsdl-image1.2-dev libsdl-gfx1.2-dev libsdl-mixer1.2-dev libfribidi-dev liblzo2-dev libfreetype6-dev libsqlite3-dev libogg-dev libasound2-dev python-sqlite libglew-dev libcurl3 libcurl4-gnutls-dev libxrandr-dev libxrender-dev libmad0-dev libogg-dev libvorbisenc2 libsmbclient-dev libmysqlclient-dev libpcre3-dev libdbus-1-dev libhal-dev libhal-storage-dev libjasper-dev libfontconfig-dev libbz2-dev libboost-dev libenca-dev libxt-dev libxmu-dev libpng-dev libjpeg-dev libpulse-dev mesa-utils libcdio-dev libsamplerate-dev libmpeg3-dev libflac-dev libiso9660-dev libass-dev libssl-dev fp-compiler gdc libmpeg2-4-dev libmicrohttpd-dev libmodplug-dev libssh-dev gettext cvs python-dev libyajl-dev libboost-thread-dev libplist-dev libusb-dev libudev-dev
at this point you'll get some errors on wrong file numbers. Redo the command and put an equal sign and type in the version number for the files.
$ sudo apt-get install autopoint libltdl-dev
$ sudo apt-get update
$ sudo apt-get build-dep xbmc
$ sudo ./bootstrap
$ sudo ./configure --enable-vdpau
$ make -j2
$ make install DESTDIR=$HOME/xbmc
Living Room: Ubuntu 16.10 x64 | BayTrail-M SOC | Krypton | Hitachi 55L6 | Yamaha RX-V665 | 7.1 Polk Surround
Den: RetroPie 4.1 | Raspberry Pi 3 | Krypton | VIZIO XVT553SV
Bedroom: OSMC 2017.02-1 | Raspberry Pi 3 | Krypton | VIZIO E370VA
HP Chromebook 14: Ubuntu 16.04 x64 | Celeron 2955U | Jarvis
NAS: Windows 10 | 20TB on DrivePool | Emby DB | Subsonic | Plex
Posts: 3
Joined: Jul 2011
2012-05-19, 21:34
(This post was last modified: 2012-05-21, 02:59 by User 98387.)
(2012-05-19, 15:22)VanillaXtract Wrote: $ cd /usr/src/
$ sudo git clone git://github.com/FernetMenta/xbmc.git
$ cd xbmc
$ sudo apt-get install git-core make g++ gcc gawk pmount libtool nasm yasm automake cmake gperf zip unzip bison libsdl-dev libsdl-image1.2-dev libsdl-gfx1.2-dev libsdl-mixer1.2-dev libfribidi-dev liblzo2-dev libfreetype6-dev libsqlite3-dev libogg-dev libasound2-dev python-sqlite libglew-dev libcurl3 libcurl4-gnutls-dev libxrandr-dev libxrender-dev libmad0-dev libogg-dev libvorbisenc2 libsmbclient-dev libmysqlclient-dev libpcre3-dev libdbus-1-dev libhal-dev libhal-storage-dev libjasper-dev libfontconfig-dev libbz2-dev libboost-dev libenca-dev libxt-dev libxmu-dev libpng-dev libjpeg-dev libpulse-dev mesa-utils libcdio-dev libsamplerate-dev libmpeg3-dev libflac-dev libiso9660-dev libass-dev libssl-dev fp-compiler gdc libmpeg2-4-dev libmicrohttpd-dev libmodplug-dev libssh-dev gettext cvs python-dev libyajl-dev libboost-thread-dev libplist-dev libusb-dev libudev-dev
at this point you'll get some errors on wrong file numbers. Redo the command and put an equal sign and type in the version number for the files.
$ sudo apt-get install autopoint libltdl-dev
$ sudo apt-get update
$ sudo apt-get build-dep xbmc
$ sudo ./bootstrap
$ sudo ./configure --enable-vdpau
$ make -j2
$ make install DESTDIR=$HOME/xbmc
I will try.
Edit:
User@XBMC:/usr/src/xbmc$ sudo apt-get build-dep xbmc
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to find a source package for xbmc
Edit Switched back to Windows, seems a bit more powerfull at the monent. But i will try later again to get it flying on XBMCbuntu.
Posts: 326
Joined: Jun 2010
Reputation:
1
i use lirc with my remote
lirc works with sockets
i've written a pers script that listens on a lirc socket for a remote button.
when this button is sent (pressed), the perl script 'sudo reboot's