2015-10-12, 23:56
Okay, trying both, one at a time, and will report back. I see there was a typo in what @popcornmix had. Thanks.
(2015-10-12, 23:55)woronczak Wrote: I have found (with my projector W1070) that 1920*1080 @50, I don't have issues. If the GUI is set to 1920*1080 @ 23.98, once I stop the 3d iso, the projector gets stuck in frame Packing mode (hence the GUI is not right). I know you have a different projector now, but maybe try 50HzAwesome... this did the trick , but why?! 1080p/60 and 59.94 should work too. Using build #1012 now. I have an Epson 5025UB and a BenQ W1070 (in different rooms), with Pi2 connected to each.
(2015-10-12, 23:53)Milhouse Wrote: Try:
Code:tvservice -s
General
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 350 MiB
Duration : 43mn 3s
Overall bit rate mode : Variable
Overall bit rate : 1 136 Kbps
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 43mn 3s
Bit rate : 1 010 Kbps
Maximum bit rate : 4 473 Kbps
Width : 720 pixels
Height : 404 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.145
Stream size : 311 MiB (89%)
Writing library : x264 core 138 r2358 9e941d1
Encoding settings : cabac=1 / ref=5 / deblock=1:1:1 / analyse=0x3:0x133 / me=umh / subme=9 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=20 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=crf / mbtree=1 / crf=19.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Color range : Limited
Matrix coefficients : BT.709
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 43mn 3s
Bit rate mode : Variable
Bit rate : 122 Kbps
Maximum bit rate : 155 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 37.5 MiB (11%)
(2015-10-13, 00:15)hdmkv Wrote:(2015-10-12, 23:55)woronczak Wrote: I have found (with my projector W1070) that 1920*1080 @50, I don't have issues. If the GUI is set to 1920*1080 @ 23.98, once I stop the 3d iso, the projector gets stuck in frame Packing mode (hence the GUI is not right). I know you have a different projector now, but maybe try 50HzAwesome... this did the trick , but why?! 1080p/60 and 59.94 should work too. Using build #1012 now. I have an Epson 5025UB and a BenQ W1070 (in different rooms), with Pi2 connected to each.
(2015-10-12, 23:55)woronczak Wrote: I have found (with my projector W1070) that 1920*1080 @50, I don't have issues. If the GUI is set to 1920*1080 @ 23.98, once I stop the 3d iso, the projector gets stuck in frame Packing mode (hence the GUI is not right). I know you have a different projector now, but maybe try 50Hz
tvservice -s
(2015-10-13, 11:26)popcornmix Wrote:(2015-10-12, 23:55)woronczak Wrote: I have found (with my projector W1070) that 1920*1080 @50, I don't have issues. If the GUI is set to 1920*1080 @ 23.98, once I stop the 3d iso, the projector gets stuck in frame Packing mode (hence the GUI is not right). I know you have a different projector now, but maybe try 50Hz
Can you also report output of:
Code:tvservice -s
when you believe projector is incorrectly in FP mode. I'd like to know if firmware believes it is signalling FP or not.
(2015-10-13, 11:08)cdvreede Wrote: just got myself a bluetooth dongle for one of my pi2's running #1003. Having issues as in managed to pair once but lost connection. Deleted connections and cannot pair again. Tried Android phone and Bluetooth speaker - both connect (they show up as devices - allow to connect or trust and connect) but then give Bluetooth error - no such file or directory and disconnect.
No idea what this is all about - any ideas??
thnx
Dennis
(2015-10-13, 12:58)woronczak Wrote: state 0x12000a [HDMI CEA (32) RGB lim 16:9], 1920x1080 @ 23.98Hz, progressive
(which is different to when the movie is actually playing = "state 0x12000a [HDMI CEA (32) 3D FP RGB lim 16:9], 1920x1080 @ 23.98Hz, progressive"
vcgencmd measure_clock pixel
(2015-10-13, 22:24)rudrood Wrote: @popcornmix,
Want to start using the testbuilds on my Pi2.
Are there any of my config.txt settings that are obsolete for these builds?
arm_freq=1050
core_freq=550
over_voltage=4
gpu_mem=320
gpu_freq=400
hdmi_pixel_encoding=2
dtoverlay=sdhost,overclock_50=84
over_voltage_sdram_c=0
over_voltage_sdram_i=0
over_voltage_sdram_p=2
avoid_pwm_pll=1
v3d_freq=300
force_turbo=1