•   
  • 1
  • 132
  • 133
  • 134(current)
  • 135
  • 136
  • 168
  •   
  Thread Closed
OpenELEC Testbuilds for RaspberryPi (Kodi 16.0)
(2015-11-10, 01:25)Milhouse Wrote: New OpenELEC Jarvis build #1109
[*]Add i2s patches, hopefully fix broken audio devices

Works! Big Grin
(2015-11-10, 01:32)mule1 Wrote:
(2015-11-09, 09:09)Caramba69 Wrote:
(2015-11-07, 15:25)Caramba69 Wrote: I will check this tomorrow as well. Perhaps also somebody else can check?

Skipping works for me.
Thanks for the info. Did you try it by using an NFS connection to a NAS or with a direct attached storage?

I use a nas via smb.
(2015-11-10, 02:31)Really? Wrote:
(2015-11-10, 01:25)Milhouse Wrote: New OpenELEC Jarvis build #1109
[*]Add i2s patches, hopefully fix broken audio devices

Works! Big Grin

Yes. Hifiberry DAC+ working fine now here too.
(2015-11-10, 14:06)beertank Wrote:
(2015-11-10, 02:31)Really? Wrote:
(2015-11-10, 01:25)Milhouse Wrote: New OpenELEC Jarvis build #1109
[*]Add i2s patches, hopefully fix broken audio devices

Works! Big Grin

Yes. Hifiberry DAC+ working fine now here too.

PiDigiAmp+ fro IQaudio also working again.

Thanks for the fast work in getting this going again
I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...
(2015-11-10, 17:13)gara93 Wrote: I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...

Are you using a Milhouse build or something else?
Note: there is also a stable OE 6 build which may be a separate choice.

If you are using a Milhouse build, then post a debug log (wiki).
(2015-11-10, 00:57)popcornmix Wrote:
(2015-11-09, 23:52)polo_joe Wrote: I now tried
hvs_priority=0x01000000 and v3d_clock=400

no artefacts but glitches when watching hd channel servus tv.

Can you wind the "N" up? E.g. try 0x08000000 and if still no glitches try 0x0C000000 etc.

with 0x08000000 I still get some artefacts and discontinuities in tvheadend
with 0x0C000000 the same but more often
v3d_clock=400

so 0x08000000 points into the right direction
(2015-11-10, 17:51)polo_joe Wrote: with 0x08000000 I still get artefacts and discontinuities in tvheadend
with 0x0C000000 the same but more often
v3d_clock=400

Okay, so 1 is okay, and 8 is too high. So try 0x04000000.
(2015-11-10, 17:54)popcornmix Wrote:
(2015-11-10, 17:51)polo_joe Wrote: with 0x08000000 I still get artefacts and discontinuities in tvheadend
with 0x0C000000 the same but more often
v3d_clock=400

Okay, so 1 is okay, and 8 is too high. So try 0x04000000.

rare artefacts, but still there
Try 2 and 3 ;-)
Katastrophentourist
(2015-11-10, 18:31)MarkT Wrote: Try 2 and 3 ;-)

the same - rare artefacts
4 worked best I think
(2015-11-10, 18:51)polo_joe Wrote: the same - rare artefacts
4 worked best I think

Any lagging/frame drops with 4 (either with or without v3d_freq=400)?
there are no frame drops neither with nor without v3d_freq=400
only discontinuities in tvheadend log

2015-11-10 18:04:00.276 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 4)

2015-11-10 18:04:37.249 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 5)

2015-11-10 18:04:49.246 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 7)
I understand that tvh also has to work and it is a development build with purpose of making things work, but would highly recommend VDR, which is rock solid and works perfectly!
HTPC 1: ASRock N3150DC-ITX, 8GB DDR3L, 64GB SSD, Ubuntu Server 16.04 LTS + Kodi v17 EGL
HTPC 2: RPi2 + HiFiBerry DIGI+, LibreElec
Question 
(2015-11-10, 17:23)popcornmix Wrote:
(2015-11-10, 17:13)gara93 Wrote: I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...

Are you using a Milhouse build or something else?
Note: there is also a stable OE 6 build which may be a separate choice.

If you are using a Milhouse build, then post a debug log (wiki).

There is a stable OE 6 with jarvis 16? i try the stable version with isengaardand I have Always problems with pvr..
however i'm using a Milhouse build. and this is my log: (kodi log uploader doesn't work..)
http://www.filedropper.com/kodi_2
  •   
  • 1
  • 132
  • 133
  • 134(current)
  • 135
  • 136
  • 168
  •   
  Thread Closed
 
Thread Rating:
  • 10 Vote(s) - 5 Average



Logout Mark Read Team Forum Stats Members Help
OpenELEC Testbuilds for RaspberryPi (Kodi 16.0)510