[spencerjford]

is "only deinterlace pixel in the middle of the frame" the setting from processing -> deinterlacing "only look at pixels in the center (good for broadcasts, bad for anime)"

http://i1357.photobucket.com/albums/q760...jjtyew.png

if yes it should be renamed it does something different for IVTC. deinterlacing is not effected by it. only deinterlacing the middle of a screen is totally pointless ^^.

That's madVR wording, not anything DSPlayer done.

[gotham_x]

@aracnoz

I am using internal filters, with settings Load from madVR active profile, by further testing, I noticed that, if the movie plays in the window, the video plays correctly, if the movie is played in full screen, the movie is played NOT and you have black screen.

I try to provide debug log

http://xbmclogs.com/ptwdp4res/2osvtu/raw

I provide screenshots, Film reproduced in full screen, on the right you can see a part of a black screen and a small part of that interface is back after launching the movie in full screen.

you should configure your advancedsettings.xml as described here http://kodi.wiki/view/Log_file/Advanced#...ttings.xml to have a full debug log

anyway i think that your problem could be related to something wrong in your guisettings.xml after the upgrade because

DSPlayer set his window to work on the main screen but then kodi try to change the resolution on the secondary screen

08:36:13 T:6568 NOTICE: Display resolution for madVR ADJUST : 1680x1050@ 59.94 - Full Screen (57) (weight: 0.000) DSPLAYER
08:36:14 T:5624 NOTICE: CDSPlayer:rocess - Successfully creating DS Graph
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:00:00.000" found. Start time: 0
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:02:42.662" found. Start time: 162662
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:10:09.108" found. Start time: 609108
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:17:47.316" found. Start time: 1067316
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:24:33.180" found. Start time: 1473180
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:30:12.477" found. Start time: 1812477
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:35:34.090" found. Start time: 2134090
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:40:47.070" found. Start time: 2447070
08:36:14 T:4528 NOTICE: Display resolution ADJUST : 1920x1080@ 59.94 #2 - Full Screen (17) (weight: 0.000) KODI

so you have to do some tests, pls try to rename your kodi folder in appdata "%appdata%/kodi" just to let Kodi 16.0 to create a new clean folder without any previous configuration, then you have to set your monitor with the option in

System - Video Output - Display mode

if everything properly work, then you can continue step by step to reintergrate your old configuration, so adjust refresh, a different skin etc etc

otherwise you should also try with a single monitor

it could be also possible to fix the problem only by renaming your guisettings.xml in the current installation to generate a new one, but just to be more sure do your test with a clean folder

Hi Aracnoz

I think I understand what the problem is, I did a clean install new Jarvis DSPlayer 16.0 Beta1, and configuration GUI Kodi step by step. in the sense that at each step of the configuration just checking playing a movie with full screen.
This skin with default Confluence and MADNOX, movie playback is successful up when I reach the menu, VIDEO SETTINGS << >> PLAY:
To the card, RULE UPDATE FREQUENCY DISPLAY if you set with ALWAYS and / or AT START / STOP Kodi DSPlayer crashes with black screen, leaving RULE UPDATE FREQUENCY DISPLAY OFF
movie playback is performed correctly with DSPlayer, now I have no idea if this is good or not, this is' ...

[huhn]

is "only deinterlace pixel in the middle of the frame" the setting from processing -> deinterlacing "only look at pixels in the center (good for broadcasts, bad for anime)"

http://i1357.photobucket.com/albums/q760...jjtyew.png

if yes it should be renamed it does something different for IVTC. deinterlacing is not effected by it. only deinterlacing the middle of a screen is totally pointless ^^.

That's madVR wording, not anything DSPlayer done.

there is no word in madVR that only the middle of the picture is deinterlaced and that's not happening.

[oldpoem]

is "only deinterlace pixel in the middle of the frame" the setting from processing -> deinterlacing "only look at pixels in the center (good for broadcasts, bad for anime)"

http://i1357.photobucket.com/albums/q760...jjtyew.png

if yes it should be renamed it does something different for IVTC. deinterlacing is not effected by it. only deinterlacing the middle of a screen is totally pointless ^^.

That's madVR wording, not anything DSPlayer done.

there is no word in madVR that only the middle of the picture is deinterlaced and that's not happening.

It tiok from MadVR control panel wording in deinterlace settings.

[huhn]

It tiok from MadVR control panel wording in deinterlace settings.

this option isn't even used for normal deinterlacing it's used for IVTC and it is not only deinterlacing the pixel in the middle of the screen.

[Warner306]

I don't think Event Logging is working under System -> Logging. This may be a DSPlayer issue as this feature was not designed to work with DSPlayer.

FYI, the only really interesting feature in Jarvis is the new long-press for remote buttons:

*Long-press – Jarvis v16 introduced a long-press for select keystrokes. Holding a key for a couple of seconds enables a secondary command. Currently, this is limited to two keystrokes and only appears to be compatible with eHome receivers:

• Short: Enter – Long: Contextual Menu
  
• Short: Backspace – Long: Home Screen or Shutdown Menu
  

This is for those who are unaware of this feature.

[vicmanpergar]

@Warner306

Thanks, honestly, had no idea

[Cinder]

FYI, the only really interesting feature in Jarvis is the new long-press for remote buttons:

Nope, non-linear stretching is also something I'm looking forward to

[Warner306]

@aracnoz

I am using internal filters, with settings Load from madVR active profile, by further testing, I noticed that, if the movie plays in the window, the video plays correctly, if the movie is played in full screen, the movie is played NOT and you have black screen.

I try to provide debug log

http://xbmclogs.com/ptwdp4res/2osvtu/raw

I provide screenshots, Film reproduced in full screen, on the right you can see a part of a black screen and a small part of that interface is back after launching the movie in full screen.

you should configure your advancedsettings.xml as described here http://kodi.wiki/view/Log_file/Advanced#...ttings.xml to have a full debug log

anyway i think that your problem could be related to something wrong in your guisettings.xml after the upgrade because

DSPlayer set his window to work on the main screen but then kodi try to change the resolution on the secondary screen

08:36:13 T:6568 NOTICE: Display resolution for madVR ADJUST : 1680x1050@ 59.94 - Full Screen (57) (weight: 0.000) DSPLAYER
08:36:14 T:5624 NOTICE: CDSPlayer:rocess - Successfully creating DS Graph
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:00:00.000" found. Start time: 0
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:02:42.662" found. Start time: 162662
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:10:09.108" found. Start time: 609108
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:17:47.316" found. Start time: 1067316
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:24:33.180" found. Start time: 1473180
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:30:12.477" found. Start time: 1812477
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:35:34.090" found. Start time: 2134090
08:36:14 T:1140 NOTICE: CChaptersManager::LoadChapters Chapter "00:40:47.070" found. Start time: 2447070
08:36:14 T:4528 NOTICE: Display resolution ADJUST : 1920x1080@ 59.94 #2 - Full Screen (17) (weight: 0.000) KODI

so you have to do some tests, pls try to rename your kodi folder in appdata "%appdata%/kodi" just to let Kodi 16.0 to create a new clean folder without any previous configuration, then you have to set your monitor with the option in

System - Video Output - Display mode

if everything properly work, then you can continue step by step to reintergrate your old configuration, so adjust refresh, a different skin etc etc

otherwise you should also try with a single monitor

it could be also possible to fix the problem only by renaming your guisettings.xml in the current installation to generate a new one, but just to be more sure do your test with a clean folder

Hi Aracnoz

I think I understand what the problem is, I did a clean install new Jarvis DSPlayer 16.0 Beta1, and configuration GUI Kodi step by step. in the sense that at each step of the configuration just checking playing a movie with full screen.
This skin with default Confluence and MADNOX, movie playback is successful up when I reach the menu, VIDEO SETTINGS << >> PLAY:
To the card, RULE UPDATE FREQUENCY DISPLAY if you set with ALWAYS and / or AT START / STOP Kodi DSPlayer crashes with black screen, leaving RULE UPDATE FREQUENCY DISPLAY OFF
movie playback is performed correctly with DSPlayer, now I have no idea if this is good or not, this is' ...

The safest way to do refresh switching is through Kodi (Video -> Playback -> Adjust display refresh rate). Your video card and madVR should have these features disabled if they are available.

[Warner306]

I took CinemaVision for a test drive and it failed at one part of the sequence. iTunes trailers would not play and were skipped. Playing trailers based on "Content" in your collection and a "File" work fine.

My settings for trailers look like this:



Complete Log

The same sequence works when played with DVDPlayer.

[oldpoem]

It tiok from MadVR control panel wording in deinterlace settings.

this option isn't even used for normal deinterlacing it's used for IVTC and it is not only deinterlacing the pixel in the middle of the screen.

That should be discussed in MadVR thread at doom9 forum. Aracnoz just create settings gui to be easily selectable in Kodi. It took wording from madvr dialog not created new one.

[huhn]

the wording in madVR is correct the wording in kodi is wrong why should i go in the madVR thread for this?

[gotham_x]

@Warner306

In fact, I agree that the switching frequency should be set by the GUI Kodi, it appears that in the previous version Kodi DSPlayer (Video -> Playback -> Adjust display refresh rate) was a setting to 'START / STOP and everything worked perfectly.
In madVR where you have to look if these features are disabled?

[oldpoem]

the wording in madVR is correct the wording in kodi is wrong why should i go in the madVR thread for this?

OK. I looked it up and you're right. It's typo.

[oldpoem]

@Warner306

In fact, I agree that the switching frequency should be set by the GUI Kodi, it appears that in the previous version Kodi DSPlayer (Video -> Playback -> Adjust display refresh rate) was a setting to 'START / STOP and everything worked perfectly.
In madVR where you have to look if these features are disabled?

Either kodi and madvr has their own refresh rate switching procedure. The settings in Kodi GUI control Kodi's own not madvr. In general you want only one enabled not both. So if you enable it through Kodi GUI you are advised to disable madvr anyway.

If you want to use madvr one, you have to manually enable in madvr control panel and disable Kodi's through GUI.

But from my past experience I have better result with Kodi enabled and madvr disabled.