pull it out and put it back in again without resetting
i have this in dmesg
[ 3.133918] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[ 3.133922] dw2102: su3000_power_ctrl: 1, initialized 0
[ 3.133922]
[ 3.134049] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.134104] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[ 3.134786] ff 00 00 00 00 00
[ 3.135438] ff ff 00 00 00 00
[ 3.136591] ff ff ff 00 00 00
[ 3.137253] ff ff ff ff 00 00
[ 3.137344] IR NEC protocol handler initialized
[ 3.613876] ts2020_attach: Found tuner TS2020!
[ 3.613880] dw2102: Attached DS3000/TS2020!
[ 3.613880]
[ 3.613885] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[ 3.614201] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/input/input10
[ 3.614301] dvb-usb: schedule remote query interval to 150 msecs.
[ 3.614305] dw2102: su3000_power_ctrl: 0, initialized 1
[ 3.614305]
[ 3.614307] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[ 3.614333] usbcore: registered new interface driver dw2102
5.348240] dw2102: su3000_power_ctrl: 1, initialized 1
[ 5.348240]
[ 5.762407] dvb-usb: recv bulk message failed: -110
[ 5.762412] dw2102: i2c transfer failed.
[ 5.770560] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 5.771157] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 6.454114] r8169 0000:01:00.0 eth0: link up
[ 6.454125] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.486320] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 10.486360] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
The waiting for firmware is normal at the end of dmesg
[ 3.137918] ff ff ff ff ff 00
[ 3.138563] ff ff ff ff ff ff
[ 3.138570] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
[ 3.140403] IR RC5(x) protocol handler initialized
[ 3.144867] IR RC6 protocol handler initialized
[ 3.146081] IR JVC protocol handler initialized
[ 3.148646] IR Sony protocol handler initialized
[ 3.150384] IR MCE Keyboard/mouse protocol handler initialized
[ 3.153262] lirc_dev: IR Remote Control driver registered, major 247
[ 3.153471] IR LIRC bridge handler initialized
https://www.linuxtv.org/wiki/index.php/G...-S2_USB2.0
check which firmware you have installed the latest one needs renaming from dvb-fe-ds300X.fw to dvb-fe-ds3000.fw if you need the latest one.