2016-05-31, 07:45
"rm /storage/.cache/splash.h264" and reboot.
(2016-05-30, 23:31)Milhouse Wrote:Kore is not updated. RPI3. Honestly I don't use suspend a lot, so I don't know. I tried it yesterday out of the blue, and I recall i tried it when you wrote about it beginning of May. I tried the 0505 build again: also not working. If someone can confirm, it's worth investigating. Maybe it's a Kore thing. Do you know the suspend/wake-up command for the web interface. (jsonrpc?Application.Suspend / jsonrpc?Application.WakeUp ??)(2016-05-30, 11:10)ElectricPim Wrote: Is suspend broken in the latest build? Can't wake up anymore: Kore app.
Just in the last build #0529? Not seeing any suspend issue when using an IR remote or Yatse. Could Kore have updated?
(2016-05-31, 09:38)ElectricPim Wrote: Do you know the suspend/wake-up command for the web interface. (jsonrpc?Application.Suspend / jsonrpc?Application.WakeUp ??)
(2016-05-31, 09:38)ElectricPim Wrote: BTW is there much energy saving compared to screensaver `Black`.
(2016-05-31, 12:05)ElectricPim Wrote: Aha, it seems Kodi wakes up now I connected my keyboard. I still think it should wake up on some jsonrpc call's, like cursor movement (Input.Right) or play.
(2016-05-31, 12:05)ElectricPim Wrote: And why not add (virtual) suspend as a screensaver. Seems to be the most energy saving one, because it will put a monitor in sleep mode.
(2016-05-31, 12:05)ElectricPim Wrote: On a Pi, I guess, suspend is only dispowering hdmi, although I'm not sure if analog audio (HDMI + analog audio) is still enabled with suspend.
# uname -a
Linux rpi512 4.6.0 #1 Tue May 31 21:04:21 BST 2016 armv6l GNU/Linux
# vcgencmd version
May 31 2016 11:48:49
Copyright (c) 2012 Broadcom
version 6faf136a2445687e1bd90c8c763a8796ace73be2 (clean) (release)
# lsb_release
LibreELEC (Milhouse) - Version: devel-20160531210311-#0531-gb6370f0 [Build #0531]
# vcdbg log msg 2>&1 | grep DTOK
002472.006: Kernel trailer DTOK property says yes
# Kernel device tree status: Enabled
(2016-05-31, 20:45)Milhouse Wrote: Yes, virtual suspend simply switches off the HDMI power. I don't think it has any effect on analog audio (not tested this).
(2016-05-31, 20:45)Milhouse Wrote: There's currently no way to wake the RPi using only JSON - it needs an input from keyboard, IR or via EventServer (which I think Yatse supports, but perhaps Kore does not unless it's disdabled by default - anything in Kore settings to enable EventServer?)Yes, but is jumps to unchecked after checking.
sudo nmap -sU -p 9777 opielec.local
Host is up (0.0059s latency).
PORT STATE SERVICE
9777/udp closed unknown
MAC Address: xxx (Raspberry Pi Foundation)
<esallinterfaces default="true">false</esallinterfaces>
(2016-05-31, 23:12)popcornmix Wrote:(2016-05-31, 20:45)Milhouse Wrote: Yes, virtual suspend simply switches off the HDMI power. I don't think it has any effect on analog audio (not tested this).
Yes. HDMI audio will be impossible (the audio and video for HDMI go over the same lines that we have disabled).
Analogue audio should still be possible.
(2016-06-01, 14:54)ElectricPim Wrote: But it isn't. Analogue audio is not working in suspend. Nor in `HDMI + Anal.` nor in `Analog only`.
(2016-05-29, 20:42)Milhouse Wrote:LibreELEC:~ # ls -la /storage/.cache(2016-05-29, 18:32)popel Wrote: No, I use the default builds.
Looks like there is no splash video, wo I will try to disable (learning by doing for me)
€: Worked!! Thanks a lot! But how will I be able to use the splash video? or was it just missing?
Hmmm, a missing splash video should not block Kodi startup. A non-standard splash video could delay Kodi startup if the video is ridiculously long.
Not sure if a corrupt video file might cause problems - if this is possible, then obtaining a copy of /storage/.cache/splash.h264 might be useful so that it can be debugged further.
What is the output from the following commands:
Code:ls -la /storage/.cache
md5sum /storage/.cache/splash.h264 2>/dev/null || echo "md5sum: Splash video not found"
time /usr/bin/hello_video.bin /storage/.cache/splash.h264
Quote:Also, try the following which should reproduce "blocked Kodi", then paste the results:
Code:rm -f /storage/.config/splash.disable
texturecache.py debugon
systemctl restart kodi
sleep 60
cat /storage/.kodi/temp/kodi.log | pastebinit
Quote:To "unblock" Kodi:
Code:touch /storage/.config/splash.disable
systemctl restart kodi
sleep 20
texturecache.py debugoff
(2016-06-01, 11:02)ElectricPim Wrote: Yes, but is jumps to unchecked after checking.
Anything in Kodi/Estuary to enable EventServer for remote? Can't find it.
http://kodi.wiki/view/Settings/Services#Remote_control
I have Allow remote control for HTTP enabled in Estuary.
(2016-06-01, 11:47)ElectricPim Wrote: Even setting it in.kodi/userdata/guisettings.xm to true
It reverts to false after restart.Code:<esallinterfaces default="true">false</esallinterfaces>