[Milhouse]

Sorry... nightshift yesterday. I´ve tried the new release (#0905), but still the same error.

But i made a log

And the other log, "journalctl -a | pastebinit"?

[crisp waffles]

Has anyone used this with the WD MyCloud NAS (the white one)? I want to build a simple Kodi setup for an older relative; she's in her 60s.

sorry for off topic.

yes. the 2tb version. for about 1 year without any problems

thanks!

[Milhouse]

Nope, unfortunately not. I checked it, it was manual, otherwise I couldn't open the available versions option. But I guess this is connected with the WiFi problem I mentioned before - I installed #905 and with lan cable everything is working as expected!

Is it worth investigating? Is your rpi3 integrated WiFi working good?

I found 2 things with #905:

1) I can't install the latest libretro addon anymore (.132 is deactivated and. 133 is not able to install). Is this bug known? Funny enough I can play emulation games though...
2) with #905 skygo is no longer working (I will investigate but I guess due to the changed patch the cdm device registration is no longer found).

My RPi3 integrated WiFi seems to be working well enough although I don't use it much. Can you reproduce this problem and then upload your debug log? Same for libretro and Sky Go - debug log required.

[Milhouse]

@Milhouse after updating to #905 netflix is broken.

After reboot in get a netflix error.

I tried some previous builds down to #831 and netflix is broken with #831 too. (netflix error after reboot)

Here is my debug log.

Hope this is helpful..

Thanks!

Netflix is working fine for me.

I see two Netflix errors in your log - the first is an "end of file" error that I've never seen before (maybe a transient network issue?), and the second is a "Connection refused" error which I do see from time to time - oddly, a reboot fixes it.

If you restart does either of these errors happen consistently? As I say, the second I see occasionally, never the first, and right now with #0906 Netflix is working fine (latest version from github, rev b0b6245).

[Milhouse]

New LibreELEC.tv Leia build #0906: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.13.0 #1 Wed Sep 6 21:29:07 BST 2017 armv6l GNU/Linux

# vcgencmd version
Aug 22 2017 14:20:40
Copyright (c) 2012 Broadcom
version eb51b8b84ec11d98562dfbb7be53cdd216c0ea4c (clean) (release)

# lsb_release
LibreELEC (Milhouse): devel-20170906212753-#0906-geb5257e [Build #0906]

# Kodi version
(18.0-ALPHA1 Git:e802494). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (eb5257e, changelog) and tip of XBMC master (e802494, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.13.y
  
• Includes latest bcm2835-driver master (6573dfd, ahead +2)
  
• Includes latest kodi-platform master (36fb493)
  
• Includes latest libcec master (8adc786, ahead +26)
  
• Includes latest libnfs master (3ba2a2c, ahead +101)
  
• Includes latest p8-platform master (a822e19)
  
• Includes latest addons: inputstream.adaptive (1656efc), inputstream.rtmp (e094fa3), peripheral.joystick (cc14287), pvr.argustv (23cc0e8), pvr.demo (122dedd), pvr.dvblink (816f90c), pvr.dvbviewer (8741c8b), pvr.filmon (34dca04), pvr.hdhomerun (ace19fa), pvr.hts (53118d8), pvr.iptvsimple (ac4f4bd), pvr.mediaportal.tvserver (c86ab35), pvr.mythtv (b46e5be), pvr.nextpvr (a855663), pvr.njoy (99874de), pvr.octonet (a77cf11), pvr.pctv (549f690), pvr.stalker (e15edca), pvr.vbox (b5da811), pvr.vdr.vnsi (f3f80d5, +1), pvr.vuplus (9bfd868), pvr.wmc (d820bf8), pvr.zattoo (a24879b)
  
• Include [env] 22775c5: include crazycat dvb drivers addon in image
  
• Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] patch: pvr addons: disable broken addons
  
• Include [env] PR:1773: init: make break after behaviour really break after
  
• Include [env] PR:1776: Don't cause system to hang on halt/reboot when net-booting
  
• Include [env] PR:1791: nss/nspr: include in main image [rfc]
  
• Include [env] PR:1835: add support for optional kernel modules in image and from addons
  
• Include [env] PR:1919: samba: don't restart smbd in samba-autoshare
  
• Include [env] PR:1947: package updates
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  
• Include [pkg] PR:234: implement intensity compensation for VC-1 decoding for Ivybridge and better (intel-vaapi-driver)
  
• Include [pkg] PR:260: Fix Seeking with VC1 after 6702b01ee3598017f05374bfc7956493f790361c (intel-vaapi-driver)
  
• Include [pkg] PR:12311: FIX: ensure real filename from videodb in playlists
  
• Include [pkg] PR:12767: Partial revert of imdb crashfix due to a introduced bug
  

Build Highlights:

1. New addon: pvr.zattoo
   
2. Enable CONFIG_BRCMDBG to facilitate RPi0W/RPi3 wifi debugging
   
3. [PVR] Fix channel switching during playback
   

Build Details:

1. LibreELEC.tv:
   • RTL8812AU: update to RTL8812AU-8e7ccba (PR:1940, 1 commit, 1 file changed)
     
   • update Retroplayer add-ons (PR:1952, 2 commits, 112 files changed)
     
   • pvr.zattoo: initial package (PR:1953, 1 commit, 1 file changed)
     
2. XBMC:
   • [PVR] CPVRClient: Refactor writing addon stream properties to file item. (PR:12770, 4 commits, 4 files changed)
     
   • [PVR] Fix CPVRManager::OnPlaybackStarted to always clear playing flag (PR:12774, 1 commit, 1 file changed)
     
   • [cmake] Add header-only directories (PR:12775, 2 commits, 11 files changed)
     
   • Add contextmenu option to remove resume points (PR:12708, 2 commits, 13 files changed)
     
3. pvr.vdr.vnsi:
   • implement GetStreamTimes for recordings (f3f80d5)
     
4. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
     

[Milhouse]

Note: I don't normally have any need to look at or modify any tvheadend frontend settings, unless attempting to access server from another rpi for example

Any errors or messages in your log when accessing the tvheadend settings?

[Pienoet]

@Milhouse after updating to #905 netflix is broken.

After reboot in get a netflix error.

I tried some previous builds down to #831 and netflix is broken with #831 too. (netflix error after reboot)

Here is my debug log.

Hope this is helpful..

Thanks!

Netflix is working fine for me.

I see two Netflix errors in your log - the first is an "end of file" error that I've never seen before (maybe a transient network issue?), and the second is a "Connection refused" error which I do see from time to time - oddly, a reboot fixes it.

If you restart does either of these errors happen consistently? As I say, the second I see occasionally, never the first, and right now with #0906 Netflix is working fine (latest version from github, rev b0b6245).

Yes after every reboot i get these same errors....

I'll try #906 and see what happens..

Thank you

EDIT:

I deleted the addon and all it's settings and reboot the system after that i installed netflix again and all fine now.

Don't know what happend.

Sorry for bothering

[start78]

Didn't update for some days now because i feared broken tvheadend. Are there currently any issues or just individual problems?

[MikeKL]

Note: I don't normally have any need to look at or modify any tvheadend frontend settings, unless attempting to access server from another rpi for example

Any errors or messages in your log when accessing the tvheadend settings?

Actually during further investigation with movements using a remote around tvheadend settings options I noticed that actually I could move to main left settings with problem specifically that when first entering tvheadend settings option, user is placed within "tvheadend hostname and ip address" option with issue being unable to move to left options whilst within this setting. (cannot move to left whilst on HTTP & HTSP option either, moving thorugh value field rather than too far left "Connection, Streaming, Timer and Advanced" options)

kodi log

Strangely none of user GUI interactions are in attached kodi log? can switch on debug, which options best to enable from debug etc.

[Milhouse]

Actually during further investigation with movements using a remote around tvheadend settings options I noticed that actually I could move to main left settings with problem specifically that when first entering tvheadend settings option, user is placed within "tvheadend hostname and ip address" option with issue being unable to move to left options whilst within this setting. (cannot move to left whilst on HTTP & HTSP option either, moving thorugh value field rather than too far left "Connection, Streaming, Timer and Advanced" options)

That sounds odd. I'm assuming the first field is a text field (for hostname or IP address), so you should be able to move to the left column by moving the cursor to the beginning of the text field, and then pressing left once more to move across to the left column - this is how it works in, say, Settings > Services > Control > Web server which has similar text/numeric fields.

[Milhouse]

Strangely none of user GUI interactions are in attached kodi log? can switch on debug, which options best to enable from debug etc.

There's no user input in your log because it's not a debug log. Simply enabling "Enable debug logging" should be enough for user input to start appearing in the log - no need for any component logging.

[noideaforaname]

And the other log, "journalctl -a | pastebinit"?

http://sprunge.us/JJBe

My Internet is broken at home [emoji15] it was a little bit tricky using the phone as an hotspot and building up an ssh connection using my phone. But here we go.

Still the same on #0906, going back to #0903 everything is fine.


Gesendet von meinem D5803 mit Tapatalk

[Milhouse]

And the other log, "journalctl -a | pastebinit"?

http://sprunge.us/JJBe

My Internet is broken at home [emoji15] it was a little bit tricky using the phone as an hotspot and building up an ssh connection using my phone. But here we go.

Still the same on #0906, going back to #0903 everything is fine.

Hmmm that's not good, tvheadend (or more specifically a dvb driver) is managing to cause a kernel oops. Is there any way to reset tvheadend to default settings?

[noideaforaname]

Hmmm that's not good, tvheadend (or more specifically a dvb driver) is managing to cause a kernel oops. Is there any way to reset tvheadend to default settings?

Placeholder


Gesendet von meinem D5803 mit Tapatalk

[noideaforaname]

Hmmm that's not good, tvheadend (or more specifically a dvb driver) is managing to cause a kernel oops. Is there any way to reset tvheadend to default settings?

Is the em28xx the cause of all evil?

I'll try a clean install after i backup my library and channel settings.

I got problems a while ago using my logitech harmony remote and turned of the remote diode of the dvb-s stick, because i use a remote pi board. I added something while loading the driver to prevent loading the remote diode , but don't know anymore exactly what [emoji16]

Edit: got it

"options em28xx disable_ir=1" in a file using modprobe.d directory

Gesendet von meinem D5803 mit Tapatalk