iOS PVR Build?
#1
Now the brilliant iOS team are getting near alignment with the iOS build - is there any chance Dush (or anyone clever really) might be thinking about an iOS PVR build?
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#2
I don't have a mac, so I can't build it for you. it should build and work just fine if you do it manually.
opdenkamp / dushmaniac

xbmc-pvr [Eden-PVR builds] [now included in mainline XBMC, so no more source link here :)]
personal website: [link]

Found a problem with PVR? Report it on Trac, under "PVR - core components". Please attach the full debug log.

If you like my work, please consider donating to me and/or Team XBMC.
Reply
#3
Cool - thanks. I'll give it a go.
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#4
Not getting very far here- I don't know if you could give me any hints...

'make xcode_depends' gives this:

http://pastebin.com/LpfwYAWf

Then if I try to build anyway I get this:

http://pastebin.com/JvaAPZZ2

Cheers
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#5
OK - I'm starting back at scratch as I seemed to miss out a step first time.

So we go:

git clone git://github.com/opdenkamp/xbmc.git

works fine, nice.

But when I switch to Dharma...

$ cd xbmc

$ git checkout Dharma

Then it wipes out the files I need to install with. I take it I'm missing the point, is there a different command I should run to keep things going...

S
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#6
woah! that's ancient.
git checkout pvr-ppa
opdenkamp / dushmaniac

xbmc-pvr [Eden-PVR builds] [now included in mainline XBMC, so no more source link here :)]
personal website: [link]

Found a problem with PVR? Report it on Trac, under "PVR - core components". Please attach the full debug log.

If you like my work, please consider donating to me and/or Team XBMC.
Reply
#7
Thanks fella
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#8
Fails on the xcode depends Sad

http://pastebin.com/Z36zmRsZ

Any ideas?
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#9
I just registered to ask for a build.
I Don't have a Mac, just the Apple TV2 and really would like a build for this. Thanks!
Reply
#10
Sorry fella- never did get anywhere with this- davilla did get me a little further down the road but it still ultimately failed. Maybe I'll pull a newer release and try again soon.
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
#11
Thumbs Up 
Shoesy Wrote:Sorry fella- never did get anywhere with this- davilla did get me a little further down the road but it still ultimately failed. Maybe I'll pull a newer release and try again soon.

That'd be great!
Reply
#12
After finishing most of the ForTheRecord (4TR) pvr addon for Windows, I'm currently converting it to run on AppleTV2. Don't get excited, a *lot* needs to be done before that starts working.

But here are some tips to get you started with building the opdenkamp/xbmc githup repo (https://github.com/opdenkamp/xbmc).

First you absolutely MUST install full X11 support in SL while installing Snow Leopard!

Install XCode 3, with the OS X 10.4 SDK. Install Git (doh).

Then working from within Terminal and assuming you have a directory $HOME/Xbmc:

  1. Pickup a clone of the PVR repo

    Quote:$ cd $HOME/Xbmc
    $ git clone git://github.com/opdenkamp/xbmc.git lars

    Your clone of the sources will be at the head of the master branch then. And your working directory is $HOME/Xbmc/lars (named this so I could build multiple XBMC versions side by side).


  2. Follow the steps in README.osx https://github.com/xbmc/xbmc/raw/master/README.osx, BUT if you want to (re-)start building with a completely clean environment, change section 3.1 of the readme to

    Quote:$ cd $HOME/Xbmc/lars
    $ make -C tools/osx/osx-depends


  3. This should get you to where you start XCode to build the XBMC executable. Start XCode and follow the instructions from the README.osx again. This will build with 1 warning and at the moment I write this also 1 link error.


  4. If you want to have a true self-built xbmc executable that compiles and links, clone the xbmc/xbmc repo and compile that (don't worry they won't bite each other)
    Quote:$ cd $HOME/Xbmc
    $ git clone git://github.com/xbmc/xbmc.git xbmc

    Using your new working directory $HOME/xbmc, once again build the osx-depends, xcode_depends and then -finally- the xbmc executable. Working at the time of writing.

This should help you getting a OS X PVR build. I haven't proceeded into the iOS and AppleTV projects yet. Don't want to go there until I have a successfully working OS X version first. One step at a time, enjoying the journey Wink.

Cheers,
Fred
Reply
#13
I've got it compiled without issues with the changes to the project files which amet did today:

First i pulled the master from xbmc and build the ios version es described in README.ios

Then i've added a git remote to the pvr branch and just recompiled the xcode project. You need to go to lib/libTcpSocket and do a "make" there - otherwise the xcode project gives a link error.

I've build all osx/ios version that way without issues. But unfortunately the config button for the tvheadend plugin is grayed - so i'm not able to get any further here Sad
Reply
#14
Cool beans- have tried the build Amet made - the config button for TVH is there and accessible on his (is a little glitchy), but I can't turn on the support once it is setup. See this thread for his ipad/iphone build:

http://forum.xbmc.org/showthread.php?tid=94905&page=3

p.s. cheers for the tips Fred! We're getting closer!
Check out my stationery blog- http://www.tailormadeinvites.co.uk
Reply
 
Thread Rating:
  • 0 Vote(s) - 0 Average



Logout Mark Read Team Forum Stats Members Help
iOS PVR Build?00