ir-keytable or: How I Learned to Stop Worrying about the LIRC Kernel
#25
i used a lot of the principles here in my own setup, and all the buttons work for my setup now having made custom map files for the Harmony 650 remote I have. Inside XBMC, everything works and applying 10,000 repeat and delay settings makes it more workable.

However, I cannot get "resume from remote" to work. It suspends fine when I press the power toggle button. But nothing happens on resume.

I have a Zotac ZBox AQ01 (Kabini board) which has the built in IR receiver. Using Ubuntu, I have tried to only use the in-kernel lirc in an attempt to simplify.

I cannot find the vendor:product values (1283:0000) under the /sys/bus/usb/devices/*/idVendor files, to toggle the "enabled" flag at boot time.

I have the following devices:
Quote:sudo lsusb
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 8087:07dc Intel Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Quote:dmesg | grep CIR
[ 3.430534] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 3.430541] ite_cir: Using model: ITE8713 CIR transceiver
[ 3.472850] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input5
[ 3.473201] rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0

Quote:sudo ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
Driver ite-cir, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-6
Name: ITE8713 CIR transceiver
bus: 25, vendor/product: 1283:0000, version: 0x0000
Repeat delay = 10000 ms, repeat period = 10000 ms

Do I need the standalone lirc app on top to make this work? Is there something else in the config that needs applying?
Reply


Messages In This Thread
[No subject] - by darkscout - 2011-05-11, 02:37
[No subject] - by lukamus - 2011-06-09, 02:23
[No subject] - by darkscout - 2011-06-09, 04:22
[No subject] - by lukamus - 2011-06-09, 07:27
[No subject] - by bsp134 - 2011-06-09, 09:31
[No subject] - by lupick - 2011-06-09, 18:18
[No subject] - by darkscout - 2011-06-09, 18:36
[No subject] - by lukamus - 2011-06-10, 02:42
[No subject] - by tomolac - 2011-08-10, 19:39
[No subject] - by darkscout - 2011-08-10, 22:48
[No subject] - by tomolac - 2011-08-10, 22:53
[No subject] - by colinjones - 2011-08-13, 06:45
[No subject] - by colinjones - 2011-08-13, 08:50
[No subject] - by colinjones - 2011-08-15, 11:29
[No subject] - by colinjones - 2011-08-16, 05:13
[No subject] - by darkscout - 2011-08-16, 08:00
[No subject] - by colinjones - 2011-08-16, 08:05
[No subject] - by illumilore - 2011-11-09, 00:39
RE: ir-keytable or: How I Learned to Stop Worrying about the LIRC Kernel - by jingo_man - 2014-07-16, 13:04


Logout Mark Read Team Forum Stats Members Help
ir-keytable or: How I Learned to Stop Worrying about the LIRC Kernel0
This forum uses Lukasz Tkacz MyBB addons.