ir-keytable or: How I Learned to Stop Worrying about the LIRC Kernel
#14
...ok next problem!

I've got through all the config up to testing using irw - but none of the keys do anything when I run irw.

ir-keytable -t shows me the scan codes and the correctly mapped keycodes.

as soon as I start lirc, ir-keytables stops reporting anything. Lirc starts fine it seems, but then irw doesn't report anything at all when I press buttons on the remote. As soon as I stop lirc, ir-keytable starts working again.

I have the devinput settings in both the lirc config files. if I cat /dev/input/by-id .... it generates junk characters whilst lirc isn't running, and nothing when it is running...

for some reason it seems that lirc just isn't connected to that device properly, but enough to cut off anything else from using it!

I'm not clear on whether I am using the built in lirc stuff new to Natty or not... I just apt-get installed lirc

Can anyone help?
Reply


Messages In This Thread
[No subject] - by darkscout - 2011-05-11, 02:37
[No subject] - by lukamus - 2011-06-09, 02:23
[No subject] - by darkscout - 2011-06-09, 04:22
[No subject] - by lukamus - 2011-06-09, 07:27
[No subject] - by bsp134 - 2011-06-09, 09:31
[No subject] - by lupick - 2011-06-09, 18:18
[No subject] - by darkscout - 2011-06-09, 18:36
[No subject] - by lukamus - 2011-06-10, 02:42
[No subject] - by tomolac - 2011-08-10, 19:39
[No subject] - by darkscout - 2011-08-10, 22:48
[No subject] - by tomolac - 2011-08-10, 22:53
[No subject] - by colinjones - 2011-08-13, 06:45
[No subject] - by colinjones - 2011-08-13, 08:50
[No subject] - by colinjones - 2011-08-15, 11:29
[No subject] - by colinjones - 2011-08-16, 05:13
[No subject] - by darkscout - 2011-08-16, 08:00
[No subject] - by colinjones - 2011-08-16, 08:05
[No subject] - by illumilore - 2011-11-09, 00:39
Logout Mark Read Team Forum Stats Members Help
ir-keytable or: How I Learned to Stop Worrying about the LIRC Kernel0