[nevrion]

So update..

an other sd-card not work for me..

my ttl-cable is here, but i have a problem...ttermpro screens only :

EEEE I3000000032940xf300110303;77520EEEE I400000004294_M6_BL1_3431>2534313þ
chip type = MX
ddr type = 256*8*4 1G

DDR clock is 504MHz with 1T mode

DX0DLLCR:40000000
DX0DQTR:ffffffff
DX0DQSTR:3db05001
DX1DLLCR:40000000
DX1DQTR:ffffffff
DX1DQSTR:3db05001
DX2DLLCR:40000000
DX2DQTR:ffffffff
DX2DQSTR:3db05001
DX3DLLCR:40000000
DX3DQTR:ffffffff
DX3DQSTR:3db05001
Stage 00 Result 00000000
Stage 01 Result 00000000
Stage 02 Result 00000000
Stage 03 Result 00000000
HHH
Boot From SPI0x12345678
Boot from internal device 1st SPI RESERVED

System Started



there is no way du input commons

i have unbrick my box today .

at first , i have buyed a 8GB sd card...with 4gb or 16gb it dosent work for me..

then i have make a boot card and put in in to the box

then i have bridge a chip on board to boot my box.. a picture of the chip will follow...

http://imagizer.imageshack.us/v2/800x600q90/42/8kc7.jpg

now my box boot with sd card but after install i have the same shit bevor...

also i bridge the chip and restore the sd card... NOW my box boot in recovery and i can flash spi and firmeware sucksfull


i hope that will help other with the same problem