[charlie0440]

Not a big issue but thought I should report it. XBMC is stating my IP as my openVPN inferface IP:

ifconfig:

Code:

eth0      Link encap:Ethernet  HWaddr hidden
          inet addr:192.168.0.203  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::9eeb:e8ff:fe0a:3929/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:42911 errors:2 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:60405072 (60.4 MB)  TX bytes:1913761 (1.9 MB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:12117 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12117 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1105726 (1.1 MB)  TX bytes:1105726 (1.1 MB)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.8.0.6  P-t-P:10.8.0.5  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:199 errors:0 dropped:0 overruns:0 frame:0
          TX packets:266 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:13268 (13.2 KB)  TX bytes:21448 (21.4 KB)

wlan0     Link encap:Ethernet  HWaddr hidden  
          inet addr:192.168.0.221  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::c685:8ff:fe45:5295/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:45295 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45980 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:36473867 (36.4 MB)  TX bytes:6605873 (6.6 MB)

XBMC displays my IP under system info as 10.8.0.6 (my tun0 IP)

XBMC Media Center 12.0 Git:ae08a23 (frodo) / ppa:wsnipex/xbmc-xvba
3.7.2-030702-generic #201301111424

[nickr]

Likewise mine shows the address for a vmware adaptor and vmware is not even running!

[hubsif]

Bumping that thread, as I ran into the same issue today.

I noticed that my airplay (video) wasn't working anymore and after some investigation I found that the airplay/raop services were announced with a zeroes-only mac address (00:00:00:00:00:00). After stopping openvpn and thus removing interface tun0 and restarting XBMC, I was able to airplay videos from my iOS7 devices again.

XBMC showing the wrong interface in "System Info" is not a big issue, but I'd like to see the broken airplay fixed.

[matb]

Same problem here as hubsif.

I used this tutorial to set up my openvpn server.

But now my XBMC uses the local tunnel ip..

[And1]

same here