• 1
  • 35
  • 36
  • 37
  • 38
  • 39(current)
[i.MX6] XBMC running on Freescale SoC's
Hi

Please find the patch here attached
I was waiting for an answer before pushing it but as I think I will not have any answer I will try to push it that week...

Kind regards
Stéphan
Reply
I've tried running in at PVR setup with tvheadend. It seems to run well, but the IPU seems to keep resetting itself. I get this in the kernel messages:

[95102.342583] imx-ipuv3 2400000.ipu: IPU Warning - IPU_INT_STAT_10 = 0x00080000
[95102.462586] imx-ipuv3 2400000.ipu: IPU Warning - IPU_INT_STAT_10 = 0x00080000
[95139.082615] imx-ipuv3 2400000.ipu: IPU Warning - IPU_INT_STAT_10 = 0x00080000
[95140.042655] imx-ipuv3 2400000.ipu: IPU Warning - IPU_INT_STAT_10 = 0x00080000
[95145.042603] imx-ipuv3 2400000.ipu: IPU Warning - IPU_INT_STAT_10 = 0x00080000

When this happens, the display goes blank and the TV has to resync itself.
Reply
wolfgar: Hi Stephan. What's the current status of deinterlacing live tv on kodi+i.mx6? There is an issue https://github.com/xbmc-imx6/xbmc/issues/70, but I don't know if it's still relevant, however on current OpenElec builds (based on Gotham, kernel is 3.14.20) I experience the same problems (jerky picture) with interlaced H.264 streams as well as MPEG-2 streams.
Reply
Hello Stephan good job

OpenELEC image - imx6.arm - 4.95.1.img

supports Wandboard ?

thank you very much
Reply
Hi,
should I log this on github?
It is not possible to select a monitor refresh rate of 23.98 fps on the imx version of XBMC.
I have verified that the TV does accept both 23.98 and 24 as input rates, and the frame rate of the movie is 23.976, but only 24 fps is selectable for the monitor.
thanks.
Reply
  • 1
  • 35
  • 36
  • 37
  • 38
  • 39(current)

Logout Mark Read Team Forum Stats Members Help
[i.MX6] XBMC running on Freescale SoC's4