2014-11-22, 22:53
Updated Helix build, Kodi master from Nov 22 (last commit) + newclock4 commits.
Kodi Master:
• Master changelog
Newclock4 additions:
• fixed: Typo in variable name
• fixed: Calling WaitForData with a large minimum could cause it to block the max. timeout
• changed: Use m_StateInput else dvdplayer osd info is 8 seconds delayed
• fixed: Don't keep reading source when cache is full (fixes #15500)
• fixed: FileCache-full logic was wrong + implement GetMaxWriteSize() function
• changed: Rename confusing CSimpleDoubleCache class to CDoubleCache
• squash: Fixup build after glGet
• fixup! GL(ES): Simplify matrix stack handling
• GL(ES): Simplify matrix stack handling
• GL: switch to CPU based matrix caculations to match GLES
• gl: avoid grabbing viewport on each render
GPU firmware from Nov 22 included:
• Avoid enabling 25MHz ethernet clock on model A+
• Restructure of hdmi pll adjustment code. Add support for locking to 3:2 cadence (24fps on 60Hz)
NB! To be able to run this build you must first run enable-kodi*.sh as explained here!
If not already enabled, download and run enable-kodi2:
To install Kodi build, SSH to Pi:
See post #1 for more info
Kodi Master:
• Master changelog
Newclock4 additions:
• fixed: Typo in variable name
• fixed: Calling WaitForData with a large minimum could cause it to block the max. timeout
• changed: Use m_StateInput else dvdplayer osd info is 8 seconds delayed
• fixed: Don't keep reading source when cache is full (fixes #15500)
• fixed: FileCache-full logic was wrong + implement GetMaxWriteSize() function
• changed: Rename confusing CSimpleDoubleCache class to CDoubleCache
• squash: Fixup build after glGet
• fixup! GL(ES): Simplify matrix stack handling
• GL(ES): Simplify matrix stack handling
• GL: switch to CPU based matrix caculations to match GLES
• gl: avoid grabbing viewport on each render
GPU firmware from Nov 22 included:
• Avoid enabling 25MHz ethernet clock on model A+
• Restructure of hdmi pll adjustment code. Add support for locking to 3:2 cadence (24fps on 60Hz)
NB! To be able to run this build you must first run enable-kodi*.sh as explained here!
If not already enabled, download and run enable-kodi2:
Code:
wget http://goo.gl/G4EG8M --no-check-certificate -O enable-kodi2.sh
sudo sh enable-kodi2.sh
Code:
wget -O kodi-14-20141122-nc4.tar.gz http://goo.gl/IkB4lY --no-check-certificate
pv kodi-14-20141122-nc4.tar.gz | tar xzf - -C /home/pi/.upgrade
sudo cp /home/pi/.upgrade/kodi-14-20141122-nc4/{fixup_x.dat,start_x.elf} /boot
ln -sfn /home/pi/.upgrade/kodi-14-20141122-nc4/xbmc-bcm /home/pi/.xbmc-current
sudo reboot
See post #1 for more info