•   
  • 1
  • 8
  • 9
  • 10(current)
  • 11
  • 12
  • 260
  •   
Intel NUC - Haswell (4th Generation CPU)
(2013-11-08, 20:59)nickr Wrote: Any mention in lspci or dmesg?

Good ideas. I am not linux wiz but nothing jumps out at me (except maybe the comm device?).

This is what the PCI shows:

Code:
00:00.0 Host bridge: Intel Corporation Device 0a04 (rev 09)
        Subsystem: Intel Corporation Device 2054
00:02.0 VGA compatible controller: Intel Corporation Device 0a16 (rev 09)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
00:14.0 USB controller: Intel Corporation Device 9c31 (rev 04)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci-hcd
00:16.0 Communication controller: Intel Corporation Device 9c3a (rev 04)
        Subsystem: Intel Corporation Device 2054
00:19.0 Ethernet controller: Intel Corporation Device 1559 (rev 04)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: e1000e
00:1b.0 Audio device: Intel Corporation Device 9c20 (rev 04)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
00:1d.0 USB controller: Intel Corporation Device 9c26 (rev 04)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation Device 9c43 (rev 04)
        Subsystem: Intel Corporation Device 2054
00:1f.2 SATA controller: Intel Corporation Device 9c03 (rev 04)
        Subsystem: Intel Corporation Device 2054
        Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Device 9c22 (rev 04)
        Subsystem: Intel Corporation Device 2054

Code:
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.131233] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.131235] ACPI: bus type PCI registered
[    0.131277] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.131280] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.134199] PCI: Using configuration type 1 for base access
[    0.522247] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.534033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.534801] PCI host bridge to bus 0000:00
[    0.534805] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.534809] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.534811] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.534814] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.534816] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.534818] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.534821] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.534823] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.534825] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.534827] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.534829] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[    0.534839] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.534963] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.534977] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.534985] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.534991] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.535104] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.535114] pci 0000:00:03.0: reg 10: [mem 0xf7c34000-0xf7c37fff 64bit]
[    0.535253] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.535272] pci 0000:00:14.0: reg 10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[    0.535333] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.535400] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.535440] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.535462] pci 0000:00:16.0: reg 10: [mem 0xf7c3e000-0xf7c3e01f 64bit]
[    0.535533] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.535638] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
[    0.535656] pci 0000:00:19.0: reg 10: [mem 0xf7c00000-0xf7c1ffff]
[    0.535664] pci 0000:00:19.0: reg 14: [mem 0xf7c3c000-0xf7c3cfff]
[    0.535672] pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
[    0.535732] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.535799] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.535839] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.535853] pci 0000:00:1b.0: reg 10: [mem 0xf7c30000-0xf7c33fff 64bit]
[    0.535918] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.535985] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.536027] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.536049] pci 0000:00:1d.0: reg 10: [mem 0xf7c3b000-0xf7c3b3ff]
[    0.536141] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.536225] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.536271] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.536477] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.536493] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
[    0.536501] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
[    0.536509] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
[    0.536516] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
[    0.536524] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    0.536532] pci 0000:00:1f.2: reg 24: [mem 0xf7c3a000-0xf7c3a7ff]
[    0.536569] pci 0000:00:1f.2: PME# supported from D3hot
[    0.536661] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.536676] pci 0000:00:1f.3: reg 10: [mem 0xf7c39000-0xf7c390ff 64bit]
[    0.536696] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.538340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.538407] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.538474] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.538539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.538603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.538667] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.538734] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.538798] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.539256] acpi root: \_SB_.PCI0 notify handler is installed
[    0.539421] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.539718] PCI: Using ACPI for IRQ routing
[    0.541170] PCI: pci_cache_line_size set to 64 bytes
[    0.555354] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.555356] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.555359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.555361] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.555363] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.555365] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.555367] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.555369] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.555371] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.555373] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[    0.556279] pci 0000:00:02.0: Boot video device
[    0.571542] PCI: CLS 64 bytes, default 64
[    0.573495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.620477] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.128584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:fc:85:b7
[    1.128712] ehci-pci: EHCI PCI platform driver
[    1.128826] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.128833] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.128839] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.128853] ehci-pci 0000:00:1d.0: debug port 2
[    1.132763] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.132783] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
[    1.141676] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.213075] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    2.418907] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.875320] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
[    2.877867] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4
[    2.906471] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    2.909499] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    2.909607] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    2.999087] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input8
[    3.000452] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/input/input9
[    3.089627] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input10

And USB:

Code:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 002: ID 413c:1003 Dell Computer Corp. Keyboard Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 413c:2010 Dell Computer Corp. Keyboard
Bus 002 Device 004: ID 046d:c03f Logitech, Inc. M-BT85 [UltraX Optical Mouse]

Code:
[    0.539597] ACPI: bus type USB registered
[    0.539618] usbcore: registered new interface driver usbfs
[    0.539628] usbcore: registered new interface driver hub
[    0.539662] usbcore: registered new device driver usb
[    1.128710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.128839] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.141676] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.141809] hub 1-0:1.0: USB hub found
[    1.141929] uhci_hcd: USB Universal Host Controller Interface driver
[    1.141968] usbcore: registered new interface driver usb-storage
[    2.214283] usbcore: registered new interface driver usbhid
[    2.214284] usbhid: USB HID core driver
[    2.242254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.242759] hub 2-0:1.0: USB hub found
[    2.246858] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.246981] hub 3-0:1.0: USB hub found
[    2.418907] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.542834] hub 1-1:1.0: USB hub found
[    2.702341] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    2.716414] usb 2-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[    2.716939] hub 2-3:1.0: USB hub found
[    2.982503] usb 2-3.1: new full-speed USB device number 3 using xhci_hcd
[    2.998113] usb 2-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.998120] usb 2-3.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[    2.999087] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input8
[    2.999253] hid-generic 0003:413C:2010.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-3.1/input0
[    3.000452] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/input/input9
[    3.000544] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-3.1/input1
[    3.065873] usb 2-3.3: new low-speed USB device number 4 using xhci_hcd
[    3.086401] usb 2-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.089627] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input10
[    3.089890] hid-generic 0003:046D:C03F.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3.3/input0
Reply
(2013-11-08, 20:55)aesalazar Wrote: So has anyone been able to get the internal IR to work in a linux OS or is it confirmed that it is a no go? I got my i3 and was happy to see that the it powered right up from my MCE remote right out of the box but is not listed in OE when I do the lsusb or in the devices.

Ernie

It does not appear the integrated IR in the Haswell boxes is working under Linux, at least no one has reported getting it to work.
Reply
Please, help a noob.
Which version of OE should I install for i5 d54250WYK NUC?
Reply
(2013-11-08, 23:37)voip-ninja Wrote: It does not appear the integrated IR in the Haswell boxes is working under Linux, at least no one has reported getting it to work.

Has anyone confirmed it works with Windows yet though? I know we've been theorizing it but I don't think anyone has come out and said it works perfectly or have they? Just wondering if it is just Linux that isn't working or the whole IR.
Reply
Its odd that the hardware isn't even detected on the pci or usb bus on linux. If its there it should be showing up even as 'unknown device'.
If I have helped you or increased your knowledge, click the 'thumbs up' button to give thanks :) (People with less than 20 posts won't see the "thumbs up" button.)
Reply
According to the technical product specification (https://downloadcenter.intel.com/Detail_...umentation), it's connected to the LPC bus. Does it show up in "lspnp"?
Reply
(2013-11-09, 00:14)BuTbKa Wrote: Please, help a noob.
Which version of OE should I install for i5 d54250WYK NUC?

Guys, advise?!
Reply
Doesnt look like OE has the lspnp command or lpc.This is the pain with OE, great system but hard to troubleshoot. I think I might try ubuntu minimal over the weekend to see if it works any better.

Ernie
Reply
(2013-11-09, 01:54)BuTbKa Wrote:
(2013-11-09, 00:14)BuTbKa Wrote: Please, help a noob.
Which version of OE should I install for i5 d54250WYK NUC?

Guys, advise?!

The "intel" version.
Reply
(2013-11-09, 03:27)voip-ninja Wrote:
(2013-11-09, 01:54)BuTbKa Wrote:
(2013-11-09, 00:14)BuTbKa Wrote: Please, help a noob.
Which version of OE should I install for i5 d54250WYK NUC?

Guys, advise?!

The "intel" version.
Thanks a lot
Reply
(2013-11-09, 02:22)aesalazar Wrote: Doesnt look like OE has the lspnp command or lpc.This is the pain with OE, great system but hard to troubleshoot. I think I might try ubuntu minimal over the weekend to see if it works any better.
I think this is it:
Code:
$ cat /sys/bus/pnp/devices/00\:08/id
NTN0530

Trying to load the driver nuvoton-cir gives the following error:
Code:
nuvoton-cir 00:08: IR PNP Port not valid!
Reply
I found this in my boot messages:
Code:
[    0.167361] pnp 00:08: Plug and Play ACPI device, IDs NTN0530 (disabled)

I'm not at all familiar with ACPI, but my guess is that the device isn't allocated io and irq resources and that's why the driver fails to load.

Try to enable the device:
Code:
$ echo "auto" | sudo tee /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources
auto
$ cat /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources
state = disabled
io 0x240-0x24f
irq 3
io 0x250-0x25f

And load the driver:
Code:
$ sudo modprobe nuvoton-cir debug=1

Testing with
Code:
$ sudo mode2 -d /dev/lirc0
reports events when I point a random remote at it and push buttons. Smile
Reply
@lmyllari: Good stuff. But it didnt work for me unfortunately. I was able to confirm that I was getting the same message in my boot log. The tee and modprobe seem to go without error but I still do not see lirc0 show up in dev. irw doesnt see anything and mode2 error out.

Are you using OE? I ask because you mention sudo in your commands but should not need that.

Thanks for the help.
Ernie
Reply
I want to buy a nuc for xbmc and excuse me if this has already been ask, I 'm new to mini pc, I was wondering if this one " Nucleus Mini
Mini-PC, Processeur Intel Celeron 847, Intel HD Graphics, 4096 Mo (4 Go)" is enough to play 1080 movies ? or do I have to buy the I3 version?
did someone tested it? is it ok?
thanks for your advices
cheers
Reply
Same report as aesalazar on the commands. The good news is that a harmony 900 can wake the CIR up from S6 by sending a Microsoft MCE power command. Now for making it work in OE...
Reply
  •   
  • 1
  • 8
  • 9
  • 10(current)
  • 11
  • 12
  • 260
  •   
 
Thread Rating:
  • 7 Vote(s) - 4.86 Average



Logout Mark Read Team Forum Stats Members Help
Intel NUC - Haswell (4th Generation CPU)4.867