Posts: 4,058
Joined: Oct 2007
Reputation:
89
zag
Team-Kodi Member
Posts: 4,058
Check your keymap files. I have removed the shutdown() action
Posts: 2
Joined: Feb 2014
Reputation:
0
Hello,
I will probably buy D34010WYKH or DN2820FYK. I will use openelec only with an usb drive.
Some people repport HD audio problem and no HW acceleration video with the DN2820FYK
Can someone can confirm that finally the i3 haswell work correctly with lastest openelec snapshot.
1/ Bitstream succesfull DTS HDMA and DTS HD -> AV receiver show correctly "DTS – HD MSTR" for HDMA and "DTS – HD HR"
2/ xbmc from OE use hardware acceleration
3/ No more video problem
4/ does the powerup button problem with the lastest firmware is solved ?
thanks
sorry for my english
Posts: 485
Joined: Apr 2013
Reputation:
9
2014-02-06, 23:48
(This post was last modified: 2014-02-06, 23:49 by Crssi.)
I never had button power-up problems on current NUC.
I had those problem on previous, which has been replaced with a working one by reseller.
I believe that the first bunch had HW problems with power button and not BIOS, but I am not 100% sure... this are just my personal speculations.
Posts: 67
Joined: Dec 2011
Reputation:
0
2014-02-07, 12:32
(This post was last modified: 2014-02-07, 12:36 by Aquila.)
My Harmony Smart Control doesn´t work, with my USB IR used on my Zotac id11 it works out of the box, But than i have the shutdown and reboot issue.
I tried everything also the nuvoton workaround but nothing happens.
I used these Codes
-----------------------------------------------------------------------------------------------------
# RGB fix
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
# IR fix
modprobe -r nuvoton_cir
echo "auto" > /sys/bus/acpi/devices/NTN0530:00/physical_node/resources
modprobe nuvoton_cir
------------------------------------------------------------------------------------------------------
Which Openelec-Version do you guys use and which Bios Version?
I installed the last stable one and updated to bios 023.
Posts: 4,058
Joined: Oct 2007
Reputation:
89
zag
Team-Kodi Member
Posts: 4,058
I'm using Gotham with the IR fix in the first post of the thread.
My Harmony Smart control is working perfectly.
Posts: 67
Joined: Feb 2012
Reputation:
1
Hi,
i am just about to purchase this haswell nuc i3, 4gb ram 30gb msata.
and can you guys help me with a few questions ?
1, does it need a certain type of ram or any old laptop ram ?
2. what is the best OS for it, reading a few pages on here it seems like win 8.1 is best, ?
3. will the IR work with a harmony one remote ?
4. Does it power on, with the remote ?
thanks
Jim
Posts: 67
Joined: Feb 2012
Reputation:
1
thanks for that fast answer trsqr
all ready to buy now.
Posts: 117
Joined: Dec 2011
Reputation:
0
2014-02-08, 00:35
(This post was last modified: 2014-02-08, 00:37 by ThaDraGun.)
Really liked the price for baytrail but looks like Im leaning more towards buying an i3 haswell when the tall version comes out. Will be good to have the extra power I think.
I have 2gb ram taken out of my Asus UX32vd. Its covered so I can't tell the ram model number or specs. On the asus site it says DDR3 1600 MHz SDRAM
Will it be compatable? also, if I want another stick in there to make 4gb does it have to be the exact same kind?