2014-04-03, 12:56
Thanks for your reply.
Im buying this memory - http://www.ebuyer.com/509126-4gb-1600mhz...vr16ls11-4 - should be ok?
Im buying this memory - http://www.ebuyer.com/509126-4gb-1600mhz...vr16ls11-4 - should be ok?
(2014-04-03, 01:39)herbieUK Wrote: My autostart.sh file reads
StartCode:# RGB fix
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
# IR fix
modprobe -r nuvoton-cir
echo "auto" > /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources
modprobe nuvoton-cir
ir-keytable -p NEC,rc-6 -w/storage/.config/apple
End
Any help please or pretty please?
(2014-04-03, 13:08)FishOil Wrote:(2014-04-03, 01:39)herbieUK Wrote: My autostart.sh file reads
StartCode:# RGB fix
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
# IR fix
modprobe -r nuvoton-cir
echo "auto" > /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources
modprobe nuvoton-cir
ir-keytable -p NEC,rc-6 -w/storage/.config/apple
End
Any help please or pretty please?
Isn't the autostart.sh supposed to be executable?
Is that the complete content of your file?
Where is the shebang?
echo "#!/bin/sh" > /storage/.config/autostart.sh && chmod +x /storage/.config/autostart.sh
End
cd /storage/.config
touch autostart.sh
chmod 0777 autostart.sh
nano autostart.sh
# RGB fix
xrandr --output HDMI1 --set "Broadcast RGB" "Full"
End
(2014-04-03, 12:56)marcus2704 Wrote: Thanks for your reply.There is no EAN number given so I can't check. Usually compatibly of Kingston memory is quite good. The specifications are as required so I think you're good.
Im buying this memory - http://www.ebuyer.com/509126-4gb-1600mhz...vr16ls11-4 - should be ok?
Found /sys/class/rc/rc0/ (/dev/input/event8) with:
Driver nuvoton-cir, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: NEC
Repeat delay = 1000 ms, repeat period = 1 ms
End