2014-02-04, 06:48
You can use programs tera term or putty.
Baudrate has to be 115200
check under device manager for which com port its using (usually COM3)
Make sure the driver for the serial is installed properly
Has your serial cable got individual connections or one connection with all wires in. You have to make sure you have them in the right place. You only need GND, TX and RX, do not plug the 3.3v(Red) wire in.
Baudrate has to be 115200
check under device manager for which com port its using (usually COM3)
Make sure the driver for the serial is installed properly
Has your serial cable got individual connections or one connection with all wires in. You have to make sure you have them in the right place. You only need GND, TX and RX, do not plug the 3.3v(Red) wire in.
