Linux LIRC problems with Apple remote on Intel NUC (Haswell)
#1
Hellos,

So my problem is more or less that I am not sure how to fill out the hardware.conf.

The driver i am using is nuvoton-cir, which also makes the IRC on the Intel NUC able to register my apple remote (a1294). So obviously they communicate with eachother.

HOWEVER, nuvoton-cir is not a registered driver on the lirc list of compatible drivers/devices (I look through another forum, and I'm pretty sure it is the right driver that is loading. Others have done the same, and I also have a script that loads the driver for the IRC on NUC on each bootup).

My question is though, how do I fill out my hardware.conf properly? I've been able to create a lircd.conf for my remote, but it only list the inputs as "raw code". Which I don't seem to see on other guides within this topic.

Some of my info:

$ cat /proc/bus/input/devices
Quote:I: Bus=0019 Vendor=1050 Product=00c3 Version=0033
N: Name="Nuvoton w836x7hg Infrared Remote Transceiver"
P: Phys=nuvoton/cir0
S: Sysfs=/devices/pnp0/00:08/rc/rc0/input9
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=100013
B: KEY=fff 0 200108fc32e 237605100000000 0 700158000 419200004001 8e968000000000 10000000
B: MSC=10

$ ir-keytable -d /dev/lirc0
Quote:Found /sys/class/rc/rc0/ (/dev/input/event9) with:
Driver nuvoton-cir, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: LIRC
Repeat delay = 500 ms, repeat period = 125 ms
Should the enabled protocols even be LIRC, or should I use RC-6 (or a third option)?

Many thanks in advance, for anybody willing to assist! Smile
Reply



Logout Mark Read Team Forum Stats Members Help
LIRC problems with Apple remote on Intel NUC (Haswell)0
This forum uses Lukasz Tkacz MyBB addons.