[Peaf]

Is there any add-on to install a vnc server on the chrome box running openelec?

Thank you.

[movie78]

Just did a clean upgrade to OpenElec 5.0.0/Kodi

Very disappointed.
1-BD iso are having hard time playing
a-Buffering
b-Picture freezing and sound still playing.

2-The Chromebox will freeze,the only way to reset it is to unplug it.

Hard similar issue with OpenElec 4.21 Gotham but not as bad as the Openelec 5.0.0..

Is this a hardware problem or ?

[wackid]

read the wiki and recommended settings for picture freeze.

Bd. Iso no problems here...

[movie78]

read the wiki and recommended settings for picture freeze.

Bd. Iso no problems here...

I read the Wiki....

Have try skipping chapters or FF/RW?

[Matt Devo]

try playing the file from a local source (eg, USB stick or HDD) and see if you have the same issue. If so, then it's a network issue. I've played many BD iso files here (3D even) without any issues, but I have a hardwired gigE connection to my NAS.

[wackid]

No frames skipping or buffering. Blue ray with DTS Master.

Also wired network on a HP chromebox. So no gigabit LAN

[movie78]

Wired Gigabit Network.
Windows 2012 Server and Windows 8 Share drive.

Have the VidOn Box and the BD.ISO Load times are much faster than the ChromeBox(FYI)

OpecElec 4.2.1 Gotham perform much better.

I taught updating to OpenElec 5.0 Kodi will make it even much better.

[movie78]

Is this the correct settings for Asus ChromeBox?

KODI settings

System->Settings->System->Video Settings:
Vertical Sync: Let Driver decide

System ->Video->Acceleration:
Enable HQ Scalers for scaling above: 20%
Allow hardware acceleration (VDPAU): off
Allow hardware acceleration (VAAPI): On
Use Mpeg-2 VAAPI: Yes
Use Mpeg-4 VAAPI: if you like
UseVC-1 VAAPI: off (this causes vc1 interlaced to segfault, when on)
Adjust Refreshrate to match video: On

If you experience kernel hangs (dmesg will tell), you can set Prefer VAAPI Render: Off that will force the swfilter even when progressive / VAAPI BOB is in use.

System -> Video -> Playback
Sync Playback to Display: On
Sync Method: Video Clock (Resample Audio) (This will automatically use Drop / Dupe when passthrough is active -> best from two worlds)
Adjust display refresh rate to match video: On Start / Stop

[Matt Devo]

do a hard reset. apply the settings as directed in the wiki. re-test. if you have a problem, post the required info as directed at the top of the first post. Any further posts that complain about issues without providing the necessary info will be deleted.

[morbidz]

do a hard reset. apply the settings as directed in the wiki. re-test. if you have a problem, post the required info as directed at the top of the first post. Any further posts that complain about issues without providing the necessary info will be deleted.

loving the "ignore" feature of the forum

[movie78]

do a hard reset. apply the settings as directed in the wiki. re-test. if you have a problem, post the required info as directed at the top of the first post. Any further posts that complain about issues without providing the necessary info will be deleted.

Hard Reset= Do you want put it back to factory reset and start all over?

Is the Setting on the page above accurate?

[nickr]

I think the hard reset he is talking about is the one in openelec settings.

[movie78]

I think the hard reset he is talking about is the one in openelec settings.

Ok Thanks!


"Too much customer service call for my samsung phone"

[movie78]

Any other alternative to upload logfiles
xbmclogs.com is down and pastebin error file too large

[-DDD-]

http://paste.ubuntu.com/