2015-12-09, 23:30
...
(2015-12-09, 07:36)kitalor Wrote:Quote:Yes. Just make sure it's like I said. Read the OP. Would solve all your problems.Thanks for that.
After playing with the settings for some time changing everything I can find to PC 0-255 seems to make things look a lot nicer.
Not sure what is going on every\thing I've read says to do the opposite but the 16-235 makes everything very grey to almost maxing out the contrast on the tv to aleviate it. Cheap tv from 2012 with no settings for 'deep colour' or anything like that (although there is some sort of dynamic contrast going on with the internal leds which there is no control over) with a gtx 550 ti going through hdmi
(2015-12-10, 21:13)SALAMINOMACHOS Wrote: A strange situation here
I am trying to increase the scaling algorithm , to NNEDI3 , but there is not any effect
I can change it up to Super-xbr
I remember that one month ago, i could increase it , but because of my VGA card 5750 silent , i had dropped frames , so always i returned back to xbr
But today i see that i put NNEDI3 and it goes either to Jinc or does not change any
Thanks for your attention
(2015-12-10, 16:51)gotham_x Wrote: Hi.
Suspicion of this thing, on a HTPC of € 2,000 would be far-fetched as inconvenience, basically, if I turn off TV and / or AVR, the Audio device, is no longer the default, not connected, I have to do a reboot of the PC, otherwise there 'and' no Audio with Kodi.
So, the solution would be to cover the 19 pin HDMI? cover with what and on which end of the HDMI cable, side HTPC and / or AVR?
(2015-12-11, 14:42)Wanilton Wrote: Kodi Jarvis + dsplayer with all update until now (12/11/2015) .
link for download:
https://dl.dropboxusercontent.com/u/7799...0.dx11.exe
Warnings:
- This is an unofficial Kodi build not from Team Kodi.
- This build comes with no warranties, explicit or implied, and you use it at your own risk.
- This build was compiled by Wanilton, for use only in Windows OS, and have same functions official Kodi Jarvis build Nightlie + dsplayer support.
git:
https://github.com/mediaBrasil/xbmc/tree...r_dsplayer
PS: I will no update or developer dsplayer, only'll keep the current code by aracnoz update with Jarvis 16.
(2015-12-11, 15:00)Bjur Wrote:(2015-12-10, 16:51)gotham_x Wrote: Hi.
Suspicion of this thing, on a HTPC of € 2,000 would be far-fetched as inconvenience, basically, if I turn off TV and / or AVR, the Audio device, is no longer the default, not connected, I have to do a reboot of the PC, otherwise there 'and' no Audio with Kodi.
So, the solution would be to cover the 19 pin HDMI? cover with what and on which end of the HDMI cable, side HTPC and / or AVR?
With a piece of electrical tape and it should be in the computerend. But since you have spend that much money, get a HDMI EDID Ghost to solve the problem.
There's also a company which sells these HDMI cable where pin 19 is not connected.