[OurJermain]

Yes with a dvd copy made to be mkv I can play like 10 minutes and then it just "freezes"

The cpu is at 100%. 1 cpu at a time. it switches from CPU0 at 100% to CPU3 at 100%.

the fps is at 7, but the movie is just frozen.

But on my Nexus 5 (android) it also crashes but after 35 minutes or so. the video "crashes" back to Kodi. it doesn't take down Kodi itself.

The raspberry also stays responsive, just the video freezes.

I think it's just the big encoding bitrate (4gb for 2 hours) and the weakness of the Pi2.

I don't know if it shows up in the log file, because it doesn't crash, just slows down to 7fps and 100% cpu.

What do you guys think?

[doveman2]

Check your hdmi cable. If you gave her a new cable it might not be CEC capable.

The cable said High Speed HDMI with Ethernet, so I thought it should work but I had another one which says the same and that seems to work better. I don't get the error popup anymore but still the remote does nothing and I can't see in the log that the RPi is registering any key presses http://pastebin.com/GN8pVtMS

I installed OE 5.0.8 to check whether it was any different and with that I do see a popup about registering the TV CEC after XBMC loads, which I don't see with #418 but still the remote has no effect and I'm not seeing any keypresses registering in the log http://pastebin.com/iiAETsqP

[popcornmix]

Hi I notice that almost all video's i start, the first second of audio is not played. This is really annoying with a music video playlist. I know of more people who have noticed this with the change from xbmc to kodi. Anyone else notices this behavior.

First second (or 2) of audio is not played.

Check this thread where the start of audio being missed in mentioned. Not a Pi specific issue.
I've pulled in PR7035 which aims to reduce this (although doesn't remove the delay).

[popcornmix]

Yes with a dvd copy made to be mkv I can play like 10 minutes and then it just "freezes"
...
I think it's just the big encoding bitrate (4gb for 2 hours) and the weakness of the Pi2.

4GB for 2 hours is not high bitrate. My Pi2 plays raw BluRay rips at 40GB for 2 hours.

Do all files do this? Does it freeze at the same point each time or is it random?
Can you post a debug log (wiki)?

[OurJermain]

I will make a log this week/weekend. It's just 1 movie, I'm not really bothered by it. But i'll help you with the debug log. Hope it helps.

It would still be very cool to see the movie play especially knowing I helped fixing it.

[Milhouse]

New OpenELEC Isengard build #0429: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.0.0 #1 Wed Apr 29 21:04:50 BST 2015 armv6l GNU/Linux

# vcgencmd version
Apr 28 2015 18:46:46
Copyright (c) 2012 Broadcom
version f33c3f25a8bdb3522ba6b47871e15897acc223da (clean) (release)

# lsb_release
OpenELEC (Milhouse) - Version: devel-20150429210242-#0429-g60ab2c0 [Build #0429]

# vcdbg log msg 2>&1 | grep DTOK
001543.782: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of OpenELEC master (60ab2c04, changelog) and tip of XBMC master (1044e0a7, changelog) with the following modifications:

• Includes newclock4 patches
  
• Excludes the OpenELEC fernetmenta patches due to conflicts with newclock4
  
• Excludes the OpenELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.0.y
  
• Default setting for "Show RSS Feed" changed to disabled (new installs only) [patch details]
  
• Disabled "Total Duration" in Confluence (see build #0221 for details)
  
• Includes latest dcadec master (91be2c16)
  
• Includes libcec master (707bd51c)
  
• Includes latest libnfs master (77e3d80f)
  
• Includes latest addons: audiodecoder.modplug (c7e8ca82), audiodecoder.nosefart (c77e5a12), audiodecoder.sidplay (f2e7d985), audiodecoder.snesapu (9fc775b1), audiodecoder.stsound (775c858d), audiodecoder.timidity (bf9ff93d), audiodecoder.vgmstream (0c3a51a2), audioencoder.flac (84acb141), audioencoder.lame (3eb59de9), audioencoder.vorbis (d556a687), audioencoder.wav (40aaedfa), kodi-platform (48bdd985), pvr.argustv (96ee8750), pvr.demo (64749530), pvr.dvblink (5d505b87), pvr.dvbviewer (bd2c01f5), pvr.filmon (413fe9ec), pvr.hts (4bf1a97a), pvr.iptvsimple (000ff75b), pvr.mediaportal.tvserver (6f8ca82e), pvr.mythtv (1ca8fbc1), pvr.nextpvr (1ecbf87c), pvr.njoy (fcd62943), pvr.pctv (0a0924eb), pvr.vbox (4449aa55), pvr.vdr.vnsi (3a28e39a), pvr.vuplus (d6abad38), pvr.wmc (37b4b292)
  
• Include patch: Add libvcsm.so dependency to bcm2835-driver (see PR:240)
  
• Include patch: Add dcadec package for DTS HD-MA support
  
• Include patch: Add experimental splash video
  
• Include patch: Enable audiodecoder, audioencoder, pvr and visualization addons
  
• Include PR:6732: [pvr] fixed crash when multiple add-on instances get registered
  
• Include PR:6919: added: also hide thumbs for unwatched episodes if option to show plot is off
  

Build Highlights:

1. Several kernel 4.0.y updates
   

Build Details:

1. OpenELEC:
   • kodi: fix binaryaddons multiarch build meh (197b4dd7)
     
   • kodi: shutdown.sh: source etc/profile (60ab2c04)
     
2. XBMC:
   • [droid;packaging] Remove non-relevant comment (PR:7029, 1 commit, 1 file changed)
     
   • [linux] install UseMultiArch.cmake file (PR:7032, 1 commit, 1 file changed)
     
   • [pictures] SlideShowPicture: fix texels to display only filled part of t... (PR:7026, 1 commit, 1 file changed)
     
3. newclock4:
   • New commits in this build:
     • squash: MMAL: Fix a deadlock provoked by dvd menus (99c731bb)
       
     • mmal: testing give preference to dts timestamp (4e3f0a3e)
       
     • ActiveAE: slightly reduce buffer size (592ca69b)
       
   • Commits no longer in build:
     • SlideShowPicture: fix texels to display only filled part of texture instead of displaying whole texture. (5c658fde)
       
4. kernel 4.0.y:
   • New commits in this build:
     • BCM270x: Add memory and irq resources to dmaengine device and DT (0454dbb6)
       
     • dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c (1c3f58d6)
       
     • BCM270x: dma: Remove driver (f89ecdc9)
       
     • BCM270x: Remove dmaman device (b1020b5d)
       
     • Revert "Adding bcm2835-sdhost driver, and an overlay to enable it" (447841c3)
       
     • Revert "Add blk_pos parameter to mmc multi_io_quirk callback" (809f8156)
       
     • Merge pull request #945 from notro/dma (f7087bb5)
       
     • Squash: Make delay_after_stop a DT parameter, defaulting to zero (154a21d6)
       
     • Squash: Inlcude ARCH_BCM2835 in depends for bcm2835-sdhost (3140e4a5)
       
     • bcm2835: bcm2835_defconfig (83f9ea7e)
       
     • mmc: bcm2835-mmc: Make available on ARCH_BCM2835 (56b6f708)
       
     • bcm2835: bcm2835_defconfig enable MMC_BCM2835 (ab96dd85)
       
     • bcm2835: Change to use bcm2835-mmc in Device Tree (f127c578)
       
     • Merge pull request #947 from notro/mmc (6ee7bbc2)
       
     • vchiq: Allocation does not need to be atomic (276dc46a)
       

[popcornmix]

If you have had hangs or stuttery video with dvd playback then please test latest build.

[Gregoire]

If you have had hangs or stuttery video with dvd playback then please test latest build.

I've had the same issue. It was worse with MMAL enabled.

[burr]

Build Highlights:

1. New firmware
   
2. newclock4: Possible fix for images with miscoloured pixels down right edge (see PR:7026) - please test & confirm
   
3. kernel: Disable MMC feature that may be linked to SD corruption
   

Does that have anything to do with the 3D MVC MKV playback? Since that's gone after the update for me. If yes could it be that MMC feature means MVC feature? Sorry if that's a too dumb question. Got my RPI just for a few days now so it's still all new to me.

[popcornmix]

If you have had hangs or stuttery video with dvd playback then please test latest build.

I've had the same issue. It was worse with MMAL enabled.

Can you provide a sample file that is stuttery with latest build?

[illiac4]

Hi. Should autostart.sh undar storage autostart or not? ATM it is not running. If I run it manually then it works.

[popcornmix]

Does that have anything to do with the 3D MVC MKV playback? Since that's gone after the update for me. If yes could it be that MMC feature means MVC feature? Sorry if that's a too dumb question. Got my RPI just for a few days now so it's still all new to me.

No, MMC is not related to MVC.
Nothing has changed with MVC for a while. If you have problems can you confirm the latest build that works for you and the earliest build that fails.

[Patrics83]

If you have had hangs or stuttery video with dvd playback then please test latest build.

Boo ya!

I did a quick test with a few DVD iso files and all of them played perfectly!

Thanks a lot for your hard work guys!

Hi. Should autostart.sh undar storage autostart or not? ATM it is not running. If I run it manually then it works.

/storage/.config/autostart.sh

[illiac4]

Ups have missed .config. TNX

[fab67]

Not yet
Because I don't know if it's break something, I will test some more vp9 file from youtube for example ...
and It need to add external lib ( libvpx ) to ffmpeg and I don't know if openelec team is interested or will allow that

You can PR against my newclock4 branch for wider testing (or just point me at a diff that you are using).
If testing is positive then you could PR upstream (to Kodi ideally, although it won't be accepted until after Isenguard release).

Sorry for the late answer. Work .....

I'm not a coder and not really an expert in package.mk things.
What I did in OpenELEC.TV dir is:
- Build libvpx with this script : http://pastebin.com/G8NpjVJJ
- Apply this package.mk patch : http://pastebin.com/kdyGpCiZ
- and Aplly this ffmpeg patch : http://pastebin.com/Y29qNWuQ

Could this help you to test if your interested ?
Here is a little vp9/webm sample if you want to try the speed difference : https://drive.google.com/file/d/0B3hIUz8...sp=sharing