2015-08-03, 03:40
Hi, I got build #801 running on a RPi2 and now I am trying to get DVB-T live tv going. Where I am stuck is how to activate/download the vdr server component. I found only the VNSI client. I have activated and updated Kodi, OpenElec and inofficial repository, but only tvheadend is available. Card is recognized:
# dmesg | grep em28
[ 9.167924] em28xx: New device TerraTec Electronic GmbH TerraTec H5 @ 480 Mbps (0ccd:10ad, interface 0, class 0)
[ 9.167951] em28xx: Audio interface 0 found (Vendor Class)
[ 9.167959] em28xx: Video interface 0 found: isoc
[ 9.167967] em28xx: DVB interface 0 found: isoc
[ 9.168782] em28xx: chip ID is em2884
[ 9.231457] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xbd70b89e
[ 9.231461] em2884 #0: EEPROM info:
[ 9.231466] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 9.240924] em2884 #0: I2S audio, 5 sample rates
[ 9.240930] em2884 #0: 500mA max power
[ 9.240946] em2884 #0: Table at offset 0x36, strings=0x189c, 0x326a, 0x1ab4
[ 9.242231] em2884 #0: Identified as Terratec Cinergy H5 (card=79)
[ 9.242254] em2884 #0: analog set to isoc mode.
[ 9.242260] em2884 #0: dvb set to isoc mode.
[ 9.242484] usbcore: registered new interface driver em28xx
[ 9.390217] em2884 #0: Binding DVB extension
[ 13.123141] DVB: registering new adapter (em2884 #0)
[ 13.132790] em2884 #0: DVB extension successfully initialized
[ 13.132811] em28xx: Registered (Em28xx dvb Extension) extension
Kinda stuck here. I realize this build is bleeding edge. Repository not up to date maybe?
Shall I install a release version? Thank you for any tips.
# dmesg | grep em28
[ 9.167924] em28xx: New device TerraTec Electronic GmbH TerraTec H5 @ 480 Mbps (0ccd:10ad, interface 0, class 0)
[ 9.167951] em28xx: Audio interface 0 found (Vendor Class)
[ 9.167959] em28xx: Video interface 0 found: isoc
[ 9.167967] em28xx: DVB interface 0 found: isoc
[ 9.168782] em28xx: chip ID is em2884
[ 9.231457] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xbd70b89e
[ 9.231461] em2884 #0: EEPROM info:
[ 9.231466] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 9.240924] em2884 #0: I2S audio, 5 sample rates
[ 9.240930] em2884 #0: 500mA max power
[ 9.240946] em2884 #0: Table at offset 0x36, strings=0x189c, 0x326a, 0x1ab4
[ 9.242231] em2884 #0: Identified as Terratec Cinergy H5 (card=79)
[ 9.242254] em2884 #0: analog set to isoc mode.
[ 9.242260] em2884 #0: dvb set to isoc mode.
[ 9.242484] usbcore: registered new interface driver em28xx
[ 9.390217] em2884 #0: Binding DVB extension
[ 13.123141] DVB: registering new adapter (em2884 #0)
[ 13.132790] em2884 #0: DVB extension successfully initialized
[ 13.132811] em28xx: Registered (Em28xx dvb Extension) extension
Kinda stuck here. I realize this build is bleeding edge. Repository not up to date maybe?
Shall I install a release version? Thank you for any tips.