OpenELEC Testbuilds for RaspberryPi (Kodi 16.0)
(2015-09-26, 22:35)doveman2 Wrote: Seems to be hardware. I went back to #908, which I know was working, removed "dwc_otg.fiq_fsm_mask=0xF" from cmdline.txt and removed the line from /etc/modprobe.d/dvbt.conf that I'd added to try and disable the tuners IR sensor in an attempt to fix my stuttering problems (which turned out to be caused by the other IR dongle I was using) and nothing helped. Even though I'd pulled the power to the RPi, which is powering the hub the tuner is plugged into to, after I disconnected the tuner from the hub and plugged it directly into the RPi it showed up, so I plugged it back into the hub and it's working in that again now. So I guess it needed power-cycling for some reason and cutting the power to the RPi briefly wasn't enough.

Something's still not right. Even with #908, which the tuner was working with stably for over a week, it keeps disappearing when plugged into the hub now (or doesn't even show up at all) and I've had to plug it directly into the RPi, which seems to be stable.

I'll try adding max_usb_current=1 to config.txt but as I say, the tuner was working fine in the hub before without that and I've actually removed some USB hardware (the IR receiver that was causing the stuttering, plugged into the RPi, not the hub) since, so the draw is less now.

Messages In This Thread
RE: OpenELEC Testbuilds for RaspberryPi (Kodi 16.0) - by doveman2 - 2015-09-29, 16:08
Bluetooth on #1003 - by cdvreede - 2015-10-13, 11:08
Re: RE: Bluetooth on #1003 - by Milhouse - 2015-10-13, 13:24

Logout Mark Read Team Forum Stats Members Help
OpenELEC Testbuilds for RaspberryPi (Kodi 16.0)10
This forum uses Lukasz Tkacz MyBB addons.