v15 No HDMI output (video or audio) from Haswell Mac Mini
#1
I have a Haswell i5 Mac Mini (Late 2014). It runs OE5+Kodi14.2 perfectly fine.

I tried a couple of different builds of OE6 with Kodi 15.1 (OE 5.95.5) and OE 6 with experimental Kodi v16 (from Fritsch) and in both cases, setting the option to set the display refresh rate to match the video resulted in no signal out from HDMI (audio or video) upon initiating playback of any video in Kodi. Yamaha AVR and Sony TV reported no signal. Turning off the refresh rate option enabled proper playback.

Log file: http://xbmclogs.com/pthzwxo9d

I'm now back to the latest stable release... OE5 with Kodi 14.2 (working normally)
Reply
#2
Please post the log from official 5.95.5 - the log you have attached uses a current WIP method to switch resolutions which is not only broken for you currently.

Edit: And as you are at it, please remove the AVR out of the chain and test only with the TV and OE 5.95.5 - i think the AVR needs a powercycle.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#3
(2015-09-20, 08:22)fritsch Wrote: Please post the log from official 5.95.5 - the log you have attached uses a current WIP method to switch resolutions which is not only broken for you currently.

Edit: And as you are at it, please remove the AVR out of the chain and test only with the TV and OE 5.95.5 - i think the AVR needs a powercycle.

I quickly abandoned it in an attempt to get it working properly and didn't capture a log. I'll try to find time to reinstall 5.95.5 and update this thread when I get the chance.
Reply
#4
(2015-09-20, 08:22)fritsch Wrote: Please post the log from official 5.95.5 - the log you have attached uses a current WIP method to switch resolutions which is not only broken for you currently.

Edit: And as you are at it, please remove the AVR out of the chain and test only with the TV and OE 5.95.5 - i think the AVR needs a powercycle.

I re-installed 5.95.5 OE6 Beta 5 tonight...

Logs:
Sync Disabled: http://xbmclogs.com/p4wpqrbsj
Sync Enabled: http://xbmclogs.com/pi9vcxo6c
Sync Enabled (direct to TV - no AVR): http://xbmclogs.com/pn4j6yaeq

The last two scenarios result in no HDMI signal.

Here's the pastebinit output of kodi-xrandr...
Sync Disabled: http://sprunge.us/BZhV
Sync Enabled: http://sprunge.us/KcWE

Output of xrandr --verbose...

Code:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x43
    Timestamp:  -216601193
    Subpixel:   unknown
    Clones:     HDMI1
    CRTCs:      0 1 2
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter:
    Broadcast RGB: Automatic
        supported: Automatic, Full, Limited 16:235
    audio: auto
        supported: force-dvi, off, auto, on
DP2 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x44
    Timestamp:  -216601193
    Subpixel:   unknown
    Clones:     HDMI2
    CRTCs:      0 1 2
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter:
    Broadcast RGB: Automatic
        supported: Automatic, Full, Limited 16:235
    audio: auto
        supported: force-dvi, off, auto, on
HDMI1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x45
    Timestamp:  -216601193
    Subpixel:   unknown
    Clones:     DP1
    CRTCs:      0 1 2
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter:
    aspect ratio: Automatic
        supported: Automatic, 4:3, 16:9
    Broadcast RGB: Automatic
        supported: Automatic, Full, Limited 16:235
    audio: auto
        supported: force-dvi, off, auto, on
HDMI2 connected 1920x1080+0+0 (0x49) normal (normal left inverted right x axis y axis) 1660mm x 934mm
    Identifier: 0x46
    Timestamp:  -216601193
    Subpixel:   unknown
    Gamma:      1.0:1.0:1.0
    Brightness: 1.0
    Clones:     DP2
    CRTC:       0
    CRTCs:      0 1 2
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter:
    EDID:
        00ffffffffffff004dd9039401010101
        0119010380a65d780a0dc9a057479827
        12484c2108008180a9c0714fb3000101
        010101010101023a801871382d40582c
        45007ca66300001e011d007251d01e20
        6e2855007ca66300001e000000fc0053
        4f4e5920545620202a30320a000000fd
        00303e0f461e000a202020202020013a
        02035ef3555d5e5f621f101405130420
        2212160307111502060138097f070f7f
        071507503e1fc04d0200570601677e01
        5f5401835f000079030c004300b83c2f
        d08b010203040100073046566676b660
        70e200f9e305c301e50e60616566011d
        8018711c1620582c25007ca66300009e
        000000000000000000000000000000f5
    aspect ratio: Automatic
        supported: Automatic, 4:3, 16:9
    Broadcast RGB: Automatic
        supported: Automatic, Full, Limited 16:235
    audio: auto
        supported: force-dvi, off, auto, on
  1920x1080 (0x49) 148.500MHz +HSync +VSync *current +preferred
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  4096x2160 (0xe5) 297.000MHz +HSync +VSync
        h: width  4096 start 5116 end 5204 total 5500 skew    0 clock  54.00KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  24.00Hz
  4096x2160 (0xe6) 296.704MHz +HSync +VSync
        h: width  4096 start 5116 end 5204 total 5500 skew    0 clock  53.95KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  23.98Hz
  3840x2160 (0xe7) 297.000MHz +HSync +VSync
        h: width  3840 start 4016 end 4104 total 4400 skew    0 clock  67.50KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  30.00Hz
  3840x2160 (0xe8) 297.000MHz +HSync +VSync
        h: width  3840 start 4896 end 4984 total 5280 skew    0 clock  56.25KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  25.00Hz
  3840x2160 (0xe9) 297.000MHz +HSync +VSync
        h: width  3840 start 5116 end 5204 total 5500 skew    0 clock  54.00KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  24.00Hz
  3840x2160 (0xea) 296.704MHz +HSync +VSync
        h: width  3840 start 4016 end 4104 total 4400 skew    0 clock  67.43KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  29.97Hz
  3840x2160 (0xeb) 296.704MHz +HSync +VSync
        h: width  3840 start 5116 end 5204 total 5500 skew    0 clock  53.95KHz
        v: height 2160 start 2168 end 2178 total 2250           clock  23.98Hz
  1920x1080 (0xec) 148.500MHz +HSync +VSync
        h: width  1920 start 2448 end 2492 total 2640 skew    0 clock  56.25KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  50.00Hz
  1920x1080 (0xed) 148.352MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.43KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  59.94Hz
  1920x1080i (0xee) 74.250MHz +HSync +VSync Interlace
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.75KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  60.00Hz
  1920x1080i (0xef) 74.250MHz +HSync +VSync Interlace
        h: width  1920 start 2448 end 2492 total 2640 skew    0 clock  28.12KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  50.00Hz
  1920x1080 (0xf0) 74.250MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.75KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  30.00Hz
  1920x1080 (0xf1) 74.250MHz +HSync +VSync
        h: width  1920 start 2558 end 2602 total 2750 skew    0 clock  27.00KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  24.00Hz
  1920x1080i (0xf2) 74.176MHz +HSync +VSync Interlace
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.72KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  59.94Hz
  1920x1080 (0xf3) 74.176MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.72KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  29.97Hz
  1920x1080 (0xf4) 74.176MHz +HSync +VSync
        h: width  1920 start 2558 end 2602 total 2750 skew    0 clock  26.97KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  23.98Hz
  1680x1050 (0xf5) 119.000MHz +HSync -VSync
        h: width  1680 start 1728 end 1760 total 1840 skew    0 clock  64.67KHz
        v: height 1050 start 1053 end 1059 total 1080           clock  59.88Hz
  1600x900 (0xf6) 118.963MHz -HSync +VSync
        h: width  1600 start 1696 end 1864 total 2128 skew    0 clock  55.90KHz
        v: height  900 start  901 end  904 total  932           clock  59.98Hz
  1280x1024 (0xf7) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1152x864 (0xf8) 108.000MHz +HSync +VSync
        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock  67.50KHz
        v: height  864 start  865 end  868 total  900           clock  75.00Hz
  1280x720 (0xf9) 74.250MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  45.00KHz
        v: height  720 start  725 end  730 total  750           clock  60.00Hz
  1280x720 (0xfa) 74.250MHz +HSync +VSync
        h: width  1280 start 1720 end 1760 total 1980 skew    0 clock  37.50KHz
        v: height  720 start  725 end  730 total  750           clock  50.00Hz
  1280x720 (0xfb) 74.176MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  44.96KHz
        v: height  720 start  725 end  730 total  750           clock  59.94Hz
  1024x768 (0xfc) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  800x600 (0xfd) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  720x576 (0xfe) 27.000MHz -HSync -VSync
        h: width   720 start  732 end  796 total  864 skew    0 clock  31.25KHz
        v: height  576 start  581 end  586 total  625           clock  50.00Hz
  720x576i (0xff) 13.500MHz -HSync -VSync Interlace
        h: width   720 start  732 end  795 total  864 skew    0 clock  15.62KHz
        v: height  576 start  580 end  586 total  625           clock  50.00Hz
  720x480 (0x100) 27.027MHz -HSync -VSync
        h: width   720 start  736 end  798 total  858 skew    0 clock  31.50KHz
        v: height  480 start  489 end  495 total  525           clock  60.00Hz
  720x480 (0x101) 27.000MHz -HSync -VSync
        h: width   720 start  736 end  798 total  858 skew    0 clock  31.47KHz
        v: height  480 start  489 end  495 total  525           clock  59.94Hz
  720x480i (0x102) 13.513MHz -HSync -VSync Interlace
        h: width   720 start  739 end  801 total  858 skew    0 clock  15.75KHz
        v: height  480 start  488 end  494 total  525           clock  60.00Hz
  720x480i (0x103) 13.500MHz -HSync -VSync Interlace
        h: width   720 start  739 end  801 total  858 skew    0 clock  15.73KHz
        v: height  480 start  488 end  494 total  525           clock  59.94Hz
  640x480 (0x104) 25.200MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.50KHz
        v: height  480 start  490 end  492 total  525           clock  60.00Hz
  640x480 (0x105) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x47
    Timestamp:  -216601193
    Subpixel:   no subpixels
    Clones:    
    CRTCs:      3
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter:

Hopefully this helps figure out why sync display to video is not working for my Haswell Mac Mini.

One thing I notice is that when selecting an HDMI output in Kodi for bit streaming, my TV appears connected to HDMI1. When looking at xrandr --verbose, the TV is connected to HDMI2. Not sure if this is just a difference in enumeration of the outputs, or a sign of an issue.
Reply
#5
You don't talk about "Sync" you talk about "Adjust Refreshrate to match video" right?

Your TV / AVR is just switching OFF when we switch to 24.0 mode.

Boot normally, ssh in and then do (without playing any video):

/usr/lib/kodi/kodi-xrandr --output HDMI2 --mode 0xef


What happens?

Post:

/usr/lib/kodi/kodi-xrandr | pastebinit _before_ and _after_ you did this command.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#6
(2015-09-22, 08:04)fritsch Wrote: You don't talk about "Sync" you talk about "Adjust Refreshrate to match video" right?

Your TV / AVR is just switching OFF when we switch to 24.0 mode.

Boot normally, ssh in and then do (without playing any video):

/usr/lib/kodi/kodi-xrandr --output HDMI2 --mode 0xef


What happens?

Post:

/usr/lib/kodi/kodi-xrandr | pastebinit _before_ and _after_ you did this command.

Yes... Sorry, "Sync" is short for Adjusting the refresh rate.

Of course the TV/AVR are not switching off in the literal sense... The TV displays the message for no input signal. As soon as I stop the video, the screen regains the signal and the Kodi UI is displayed.

I'll try that command tomorrow.

I did mention that the latest stable build of OE5 works properly?
Reply
#7
No - but this code was neither touched nor changed ... so chances are hight that now OE5 won't work for you either ...
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#8
(2015-09-22, 09:10)fritsch Wrote: No - but this code was neither touched nor changed ... so chances are hight that now OE5 won't work for you either ...

I mention in the top post that the latest stable build of OE5 works just fine... Refresh rate switching works as expected. There is something different in 5.95.5... No doubt about it.
Reply
#9
Yeah newer xserver and newer drivers.

Quote:Boot normally, ssh in and then do (without playing any video):

/usr/lib/kodi/kodi-xrandr --output HDMI2 --mode 0xef


What happens?

Post:

/usr/lib/kodi/kodi-xrandr | pastebinit _before_ and _after_ you did this command.

^^ this is still needed.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#10
(2015-09-22, 21:01)fritsch Wrote: Yeah newer xserver and newer drivers.

Quote:Boot normally, ssh in and then do (without playing any video):

/usr/lib/kodi/kodi-xrandr --output HDMI2 --mode 0xef


What happens?

Post:

/usr/lib/kodi/kodi-xrandr | pastebinit _before_ and _after_ you did this command.

^^ this is still needed.

Will do that when I get home later.
Reply
#11
(2015-09-22, 08:04)fritsch Wrote: You don't talk about "Sync" you talk about "Adjust Refreshrate to match video" right?

Your TV / AVR is just switching OFF when we switch to 24.0 mode.

Boot normally, ssh in and then do (without playing any video):

/usr/lib/kodi/kodi-xrandr --output HDMI2 --mode 0xef


What happens?

Post:

/usr/lib/kodi/kodi-xrandr | pastebinit _before_ and _after_ you did this command.

That command causes loss of signal. TV on screen says...

Image

I gather it's switching to mode 0xef which is [email protected]
Running the same command with mode 0xf2 has the same result - no signal.
Running it to set mode 0x49 returns to 60Hz and I can see the Kodi GUI again.

Before: http://sprunge.us/jFhM
After: http://sprunge.us/FXZc

I can try the same using OE5 if you like... but I know it will work there.
Reply
#12
As said before: It has absolutely nothing to do with Kodi - but yes go ahead and try it with OE5.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#13
(2015-09-23, 10:29)fritsch Wrote: As said before: It has absolutely nothing to do with Kodi - but yes go ahead and try it with OE5.

Will do. Is it a driver issue with the OS?
Reply
#14
You will find out with OE5.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
Reply
#15
(2015-09-23, 21:03)fritsch Wrote: You will find out with OE5.

OE5 works perfectly... Sets the refresh rate of the TV on start/stop and no loss of signal.

What can I do to help figure out what's wrong with the OE6 beta?
Reply



Logout Mark Read Team Forum Stats Members Help
No HDMI output (video or audio) from Haswell Mac Mini0
This forum uses Lukasz Tkacz MyBB addons.