2016-05-13, 23:20
(2016-05-13, 23:06)movie78 Wrote: Dell Inspiron Micro Desktop N3050
Dell Inspiron Micro Desktop N3050 selling for $129...
Actually looks like $80 shipped?? Would be a fantastic deal!!
(2016-05-13, 23:06)movie78 Wrote: Dell Inspiron Micro Desktop N3050
Dell Inspiron Micro Desktop N3050 selling for $129...
(2016-05-14, 06:33)santiagodraco Wrote: Received my Skull Canyon tonight, Windows 10 installed, Kodi installed and successfully tested running a 3D Bluray. Just a quick test but more to come. Had an issue where it displayed as over/under for some reason but bringing up the Samsung 3D menu fixed that. Not sure why.
However I am having an issue with audio. Have the sound device (HDMI) configured as 7.1 but it will only output stereo to the Denon AVR-6200. This is using the sound test (other channels other than left/right produce no sound and the Denon still shows stereo). When running KODI I get no sound. Looks like a driver issue or something else? Anyone have any thoughts?
I'd like to get this working so I can fully test with both 3D and HD audio passthrough. So close!
Thanks!
(2016-05-14, 06:33)santiagodraco Wrote: Received my Skull Canyon tonight, Windows 10 installed, Kodi installed and successfully tested running a 3D Bluray. Just a quick test but more to come. Had an issue where it displayed as over/under for some reason but bringing up the Samsung 3D menu fixed that. Not sure why.
However I am having an issue with audio. Have the sound device (HDMI) configured as 7.1 but it will only output stereo to the Denon AVR-6200. This is using the sound test (other channels other than left/right produce no sound and the Denon still shows stereo). When running KODI I get no sound. Looks like a driver issue or something else? Anyone have any thoughts?
I'd like to get this working so I can fully test with both 3D and HD audio passthrough. So close!
Thanks!
(2016-05-14, 06:33)santiagodraco Wrote: Received my Skull Canyon tonight, Windows 10 installed, Kodi installed and successfully tested running a 3D Bluray. Just a quick test but more to come. Had an issue where it displayed as over/under for some reason but bringing up the Samsung 3D menu fixed that. Not sure why.
(2016-05-14, 06:33)santiagodraco Wrote: However I am having an issue with audio. Have the sound device (HDMI) configured as 7.1 but it will only output stereo to the Denon AVR-6200. This is using the sound test (other channels other than left/right produce no sound and the Denon still shows stereo). When running KODI I get no sound. Looks like a driver issue or something else? Anyone have any thoughts?
I'd like to get this working so I can fully test with both 3D and HD audio passthrough. So close!
(2016-05-14, 16:06)santiagodraco Wrote: A few updates (and some responses to questions above).
Regarding the audio issue (stereo only, no audio in Kodi):
1. Over HDMI I only get stereo audio. Windows audio settings are set correctly. If using mini-displayport to HDMI adapter I get full 7.1 with passthrough. IE eveything works with Displayport but NOT HDMI.
2. Kodi works and passes through HD audio great with Displayport.
3. Displayport is not a solution for me as it only gives 30hz and not 60hz. This could be an adapter issue but remains to be seen as I have not found one that states 60hz at 4k.
4. I've reinstalled graphics drivers to no avail. I have not yet tried a different HDMI adapter, will try that today.
5. WASAPI was selected. Note that I mentioned the audio issue is in Windows itself (and Kodi by extension).
6. 4k and 1080p both have the issue.
Regarding Kodi/3D:
1. Quality is excellent.
2. 3D movies start in over/under, not sure why. Driving me nuts. Once I hit the 3D button for the Samsung display it corrects.
3. HDMKV: how can I verify that I am running in 10bit 4k on the NUC? I don't see anywhere to enable 10bit vs 8. My hardware supports it (Denon 6200 and Samsung 8500).
(2016-05-14, 16:11)Neighbour Wrote: Thanks for full review ,
about the " 3D MOVIES START IN OVER/UNDER" you use kodi + MVC Build from here? or you used Cyberlink - Powerdvd or other external software that do that ?
about the Hdmi port do you think it is from Hardware problem or only driver problem ?
Thanks in advance.
(2016-05-14, 16:23)santiagodraco Wrote:(2016-05-14, 16:11)Neighbour Wrote: Thanks for full review ,
about the " 3D MOVIES START IN OVER/UNDER" you use kodi + MVC Build from here? or you used Cyberlink - Powerdvd or other external software that do that ?
about the Hdmi port do you think it is from Hardware problem or only driver problem ?
Thanks in advance.
I'm using the latest MVC build. No PowerDVD Just native Kodi. Once I select 3D from the TV menu (it detects the Over/Under) it works great. Not sure yet why Kodi is sending it as Over/under but it's definitely working as 3D (in 4k no less) so it's decoding from the Blu-ray. I'm thinking it's a Kodi issue as it's Kodi sending it as over/under when it should be mvc. I'm not an expert so not sure....
I don't have enough info yet to know if the hdmi audio issue is hardware or drivers. I know it works over mini-displayport but that doesn't really mean a whole lot. Could be a bios/firmware problem, or hardware... or who knows. Frustrating and I won't be able to check with intel support until Monday.
(2016-05-14, 16:23)santiagodraco Wrote: I'm using the latest MVC build. No PowerDVD Just native Kodi. Once I select 3D from the TV menu (it detects the Over/Under) it works great. Not sure yet why Kodi is sending it as Over/under but it's definitely working as 3D (in 4k no less) so it's decoding from the Blu-ray. I'm thinking it's a Kodi issue as it's Kodi sending it as over/under when it should be mvc. I'm not an expert so not sure....
I don't have enough info yet to know if the hdmi audio issue is hardware or drivers. I know it works over mini-displayport but that doesn't really mean a whole lot. Could be a bios/firmware problem, or hardware... or who knows. Frustrating and I won't be able to check with intel support until Monday.