2016-10-31, 20:52
Which version of windows do you have? Do you enable Stereo 3D at display setting of Control Panel?
(2016-10-30, 21:11)Siutsch Wrote:(2016-10-30, 15:07)ppoulos Wrote:(2016-10-30, 14:50)woronczak Wrote: I would try connecting ur htpc directly to the projector, rebooting the computer and see if that works. could try different hdmi cable as well....
(2016-10-30, 13:13)Siutsch Wrote: But my PS3, who can play 3D Blurays can play them through the HDMI switch and my beamer detects 3D automatically if I use this, so I think, it must work with my HTPC too.
Also part of your problem may be a timing issue, so make sure the projector is on first before your computer reboots or turns on.
Thank you both for these tips, I will try that and report back.
(2016-11-04, 09:12)chocco Wrote: The 1900 (from your spreadsheet) and the 2807 (not on your spreadsheet but slightly more powerful?) are both available barebones for under £100. What would be your personal recommendation for pure kodi and no problems whatsoever with frame rates etc, maybe the odd car racing game when the mood takes me :-) Can the brix cut it?It seems, when comparing both CPU's, the J1900 had the upper-hand of those two?
(2016-11-04, 14:05)KILLERNADS Wrote: Hi Guys,
I need some help please.
Im using my Windows 10 based HTPC and its been setup with the updated build from the first post in this thread. However, i am having trouble with getting 3D ISO Blurays to work.
They start off working perfectly fine, i start playing the movie, can disable or enable the 3d mode. Its using Hardware based solution.
However, i start seeing problems after about 3-6mins of playback. The films picture starts slowing down, and then freezes. The audio continues to play fine, just the image freezes.
Also, i am unable to skip to next chapter, forward etc.. Is that normal for 3d Bluray iso files?
I really don't want to have to buy another device to play all my 3d iso files. But if i had i would probably order a Zidoo X9S, however i would rather get this device to work properly instead.
thanks for the help!
(2016-11-04, 15:49)hdmkv Wrote: Started adding Kaby Lake and Apollo Lake h/w to spreadsheet in post #1.
So far, the issues seem to be as follows (@movie78 and others, please correct anything I may have gotten incorrect)...
- 3D MVC only works when resolution is set to 1920x1080p. Perhaps @afedchin or another dev can comment on possiblity of getting 3D to work while leaving PC at 3840X2160p (some kind of auto-switch)
- 4K H.264 and HEVC work fine, as does 10-bit
- HDR does not work. Seems to require a recent build of Windows 10, and for Kodi devs to add HDR support to Kodi app itself
- H/W w/HDMI 1.4 only (like MSI Cubi2 Kaby Lake) require a DisplayPort-to-HDMI adapter (to get HDCP2.2 and 4K @ 60Hz). But, it seems flaky
(2016-11-04, 15:00)movie78 Wrote:(2016-11-04, 14:05)KILLERNADS Wrote: Hi Guys,
I need some help please.
Im using my Windows 10 based HTPC and its been setup with the updated build from the first post in this thread. However, i am having trouble with getting 3D ISO Blurays to work.
They start off working perfectly fine, i start playing the movie, can disable or enable the 3d mode. Its using Hardware based solution.
However, i start seeing problems after about 3-6mins of playback. The films picture starts slowing down, and then freezes. The audio continues to play fine, just the image freezes.
Also, i am unable to skip to next chapter, forward etc.. Is that normal for 3d Bluray iso files?
I really don't want to have to buy another device to play all my 3d iso files. But if i had i would probably order a Zidoo X9S, however i would rather get this device to work properly instead.
thanks for the help!
What hardware are you using, it will be easy for someone the same hardware to help you because this MVC issue varies.