•   
  • 1
  • 52
  • 53
  • 54(current)
  • 55
  • 56
  • 218
  •   
  Thread Closed
v17 LibreELEC Testbuilds for RaspberryPi (Kodi 17.0)
Somehow CPU usage has increased:
#0606: 11,5%
#0605: 11,5%
#0604: 11,5%
#0604: 11,3%
#0603: 11,3%
#0602: 8,5%
#0601: 8,2%
#0525: 6,9%

top over ssh, RPI3 idle and suspended

Surprising that Kodi needs 11,5% CPU usage for kodi.bin, supended and idle
(2016-06-07, 21:30)ElectricPim Wrote: Somehow CPU usage has increased:

Do you see a similar increase when kodi is running? (e.g. in GUI on a static page?)
Do you see a similar increase when kodi is stopped? (e.g. after systemctl stop kodi)
New LibreELEC.tv Krypton build #0607: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.6.1 #1 Tue Jun 7 21:16:21 BST 2016 armv6l GNU/Linux

# vcgencmd version
Jun  2 2016 16:05:45
Copyright (c) 2012 Broadcom
version d3cabccc990645d482e723b2c65e3b4b1481afac (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160607211513-#0607-gf59ff67 [Build #0607]

# vcdbg log msg 2>&1 | grep DTOK
002477.469: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of LibreELEC.tv master (f59ff67c, changelog) and tip of XBMC master (d1a52d1e, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.6.y
  • Includes latest bcm2835-driver master (70143fe9)
  • Includes latest kodi-platform master (c8188d82, ahead +4)
  • Includes latest libcec master (6d68d212)
  • Includes latest libnfs master (cdd1643c, ahead +28)
  • Includes latest p8-platform master (041a8c6c, ahead +1)
  • Includes latest addons: adsp.basic (2ae604e5, +8), adsp.biquad.filters (01236bbe, +7), adsp.freesurround (34f50406, +7), asplib (da66f517), inputstream.mpd (3ac19c39, +11), inputstream.smoothstream (32275717, +2), peripheral.joystick (2db8029e, +32), pvr.argustv (5f48dcec, +4), pvr.demo (0fa9e1d0, +4), pvr.dvblink (a92f1264, +5), pvr.dvbviewer (3d0bea9a, +4), pvr.filmon (8743511d, +4), pvr.hdhomerun (b5ce9309, +4), pvr.hts (acd1a6ac, +5), pvr.iptvsimple (7a5a43f8, +4), pvr.mediaportal.tvserver (172a273c, +4), pvr.mythtv (e2b60252, +8), pvr.nextpvr (150698b7, +4), pvr.njoy (b5d65655, +4), pvr.pctv (feed5990, +4), pvr.stalker (fb24eda2, +13), pvr.vbox (c6594819, +4), pvr.vdr.vnsi (5498a8c1, +7), pvr.vuplus (ea3b33f6, +4), pvr.wmc (77af8daf, +4)
  • Exclude [env] kodi-999.10-aarch64-support.patch: Merged upstream
  • Include [env] e7cbe9cb: xf86-video-intel: Explicitely disable TearFree and TripleBuffer
  • Include [env] ed774729: Intel: Implement Passthrough-Range
  • Include [env] 98c65e6a: Kodi: Use Limited Range by default
  • Include [env] patch: xf86-video-intel: bump to 3fafabe
  • Include [env] patch: Fix SIGTERM patch after PR9748
  • Include [env] patch: Fix cmake after PR9750
  • Include [env] patch: Add extra headers needed by 3D BD MVC
  • Include [env] patch: mesa: update to 12.0.0-rc1
  • Include [env] patch: Bump libbluray - include MVC support
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: Enable pvr addons, disable pvr updates
  • Include [env] patch: Enable other binary addons
  • Include [env] PR:408: Fix digital audio crackling when playing music on non Kodi based setups.
  • Include [env] PR:412: splash: Stop blanking splash too early in RPi boot sequence
  • Include [env] PR:417: linux: Atom Baytrail and CherryTrail audio HDMI support
  • Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  • Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
  • Include [pkg] patch: drm/i915: Extend Fake HDMI live status to Valley View (linux)
  • Include [pkg] patch: drm/i915/psr: Try to program link training times correctly (HSW fix) (linux)
  • Include [pkg] patch: CSC: Remove average logic when saving NV12 surface on IVB+ (VAAPI fix) (libva-intel-driver)
  • Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  • Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  • Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  • Include [pkg] PR:9803: [PeripheralCecAdapter] fix playback stopping on screensaver deactivated
Build Highlights:
  1. VideoPlayer: switch back to Kodi method of counting CPUs
  2. VideoPlayer: keep value of m_vSyncAdjust on Discontinuity
Build Details:
  1. XBMC:
    • Default Scale for HQ scaling above (PR:9915, 2 commits, 2 files changed)
    • [skin.estouchy] update (PR:9928, 1 commit, 239 files changed)
  2. newclock5:
    • New commits in this build:
      • VideoPlayer: keep value of m_vSyncAdjust on Discontinuity (539ae074)
      • Revert "VideoPlayer: remove now unused header from ffmepg" (6068843d)
      • VideoPlayer: switch back to Kodi method of counting CPUs (13928a48)
      • VideoPlayer: drop useless ifdef (d445f3d7)
      • fixup! rbp: Support zero copy interface with hevc acceleration (07a5228d)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Is it possible with Kodi 17 (LibreELEC, Milhouse build) that i connect a usb bluetooth 4.0 dongle, and stream the audio to my bluetooth speakers?
If yes, how? What do i need? (I have Pi2 B)
thanks!
(2016-06-07, 22:38)popcornmix Wrote:
(2016-06-07, 21:30)ElectricPim Wrote: Somehow CPU usage has increased:

Do you see a similar increase when kodi is running? (e.g. in GUI on a static page?)
Do you see a similar increase when kodi is stopped? (e.g. after systemctl stop kodi)
Percentages are cpu usage in top for kodi process:
Code:
/usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd
So no, not when kodi is stopped. I presume suspend on a RPI is just
Code:
vcgencmd display_power 0
, kodi still running.

I came to the issue, because I tested my RPI1 with Kodi 6.0.3 and hifiberry, that I use mostly for playing music with mpd plugin, dropping 50% cpu usage (48%->22%) with hdmi disabled by screensaver (thx for the tip), and still playing music over hifiberry.
Code:
vcgencmd display_power 0
.
I always wondered why Kodi takes so much CPU being idle.

Will test a bit more,when I have time.
(2016-06-08, 07:56)relaxpi Wrote: Is it possible with Kodi 17 (LibreELEC, Milhouse build) that i connect a usb bluetooth 4.0 dongle, and stream the audio to my bluetooth speakers?
If yes, how? What do i need? (I have Pi2 B)
thanks!

Ok, i got luck with a new usb BT4 adapter.
Libreelec can use it, and i can select under system/audio out: PULSE Audio, Default Bluetooth Smile
It works. However my 60fps mp4 files stutters often. Why? CPU usage is still between 10-20%
If i set back audio out to HDMI, video playback is smooth.
If i disable MMAL hw. accelerated playback, video is smooth, but bluetooth audio not working, it goes back to hdmi.

What's going on here? What settings do i need for smooth playback +BT audio?

thanks in advance!
Thanks for the DVD iso playback support again... It works fine here :-)
Hello everybody!

I' am missing the "video calibration" feature under Settings --> Display (former Video).

Anyone having the same issue?

Greez
(2016-06-08, 17:50)max32 Wrote: I' am missing the "video calibration" feature under Settings --> Display (former Video).

There for me. It's in system/display in settings and you need settings level set to Expert.
Thanx a lot popcornmix.

You saved my day! Smile
Hello again after a long time ;-)

well, reinstate DVD support works now, but DTS and DD5.1 Audio don't work @ #605 /606 with all tested DVD.
(only on my Pi2 ?)
DTS-audio-CD in wave works fine - also Videos in h264 or m2ts stream (BD50).

I take a fresh installation from libreelec homepage on a new formated SD-card with updates from here.

...now i switch back to OpenELEC-RPi2.arm-6.0-Milhouse-20151001210244-#1001-gcd25a32 and all DTS/DD5.1 on DVD files works.

TinaTurner - Live from Holland, Alan Parsons (all known tricky files from the past) plays only in Stereo, although the info about DTS or DD5.1 is shown in the file-info.


Thanks for all
Harald
I Dont remember which build it was still able to do this but i think it was below #600
whe i stand on a directory i could choose Watch all or watch none. But now i dont see that option anymore. i didnt change any setting only just updated the build.
i have directories sometimes with 500+ files if i have to manual click watch all or unwatch all. it takes a LOT of times.

Unless it was a addon that added that but i cant remember that i removed one.
New LibreELEC.tv Krypton build #0608: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.6.2 #1 Wed Jun 8 22:33:03 BST 2016 armv6l GNU/Linux

# vcgencmd version
Jun  8 2016 16:12:00
Copyright (c) 2012 Broadcom
version 1c8638223821fe0ed16e20bd8e948b6cc037fa4a (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160608222301-#0608-g2f965b3 [Build #0608]

# vcdbg log msg 2>&1 | grep DTOK
002475.370: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of LibreELEC.tv master (2f965b37, changelog) and tip of XBMC master (d432df0b, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.6.y
  • Includes latest bcm2835-driver master (9cd62e61)
  • Includes latest kodi-platform master (c8188d82, ahead +4)
  • Includes latest libcec master (6d68d212)
  • Includes latest libnfs master (cdd1643c, ahead +28)
  • Includes latest p8-platform master (041a8c6c, ahead +1)
  • Includes latest addons: adsp.basic (2ae604e5, +8), adsp.biquad.filters (01236bbe, +7), adsp.freesurround (34f50406, +7), asplib (da66f517), inputstream.mpd (3ac19c39, +11), inputstream.smoothstream (32275717, +2), peripheral.joystick (2db8029e, +32), pvr.argustv (5f48dcec, +4), pvr.demo (0fa9e1d0, +4), pvr.dvblink (a92f1264, +5), pvr.dvbviewer (3d0bea9a, +4), pvr.filmon (8743511d, +4), pvr.hdhomerun (b5ce9309, +4), pvr.hts (acd1a6ac, +5), pvr.iptvsimple (7a5a43f8, +4), pvr.mediaportal.tvserver (172a273c, +4), pvr.mythtv (e2b60252, +8), pvr.nextpvr (150698b7, +4), pvr.njoy (b5d65655, +4), pvr.pctv (feed5990, +4), pvr.stalker (fb24eda2, +13), pvr.vbox (c6594819, +4), pvr.vdr.vnsi (5498a8c1, +7), pvr.vuplus (ea3b33f6, +4), pvr.wmc (77af8daf, +4)
  • Exclude [env] kodi-999.10-aarch64-support.patch: Merged upstream
  • Include [env] e7cbe9cb: xf86-video-intel: Explicitely disable TearFree and TripleBuffer
  • Include [env] ed774729: Intel: Implement Passthrough-Range
  • Include [env] 98c65e6a: Kodi: Use Limited Range by default
  • Include [env] patch: xf86-video-intel: bump to 3fafabe
  • Include [env] patch: Fix SIGTERM patch after PR9748
  • Include [env] patch: Fix cmake after PR9750
  • Include [env] patch: Add extra headers needed by 3D BD MVC
  • Include [env] patch: mesa: update to 12.0.0-rc1
  • Include [env] patch: Bump libbluray - include MVC support
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: Enable pvr addons, disable pvr updates
  • Include [env] patch: Enable other binary addons
  • Include [env] PR:408: Fix digital audio crackling when playing music on non Kodi based setups.
  • Include [env] PR:412: splash: Stop blanking splash too early in RPi boot sequence
  • Include [env] PR:417: linux: Atom Baytrail and CherryTrail audio HDMI support
  • Include [env] PR:431: Revert "Merge pull request #136 from lrusak/modesetting"
  • Include [env] PR:434: linux: Update to 4.6.2
  • Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  • Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
  • Include [pkg] patch: drm/i915: Extend Fake HDMI live status to Valley View (linux)
  • Include [pkg] patch: CSC: Remove average logic when saving NV12 surface on IVB+ (VAAPI fix) (libva-intel-driver)
  • Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  • Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  • Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  • Include [pkg] PR:9803: [PeripheralCecAdapter] fix playback stopping on screensaver deactivated
Build Highlights:
  1. New firmware
  2. New 4.6.2 kernel
Build Details:
  1. Firmware (Jun 8):
    • firmware: Tuner: Disable unused ACLS tuner, and improve logging
    • firmware: imx219: Remove static variable
    • firmware: ISP Tuners: Make DPF parsing thread safe
    • firmware: audioplus: Allow passthrough dma priority to be overridden in same way as pcm
    • firmware: di_adv: Remove delay uniform
    • firmeare: di_adv: Enable limiter and tweak axi priorities
  2. LibreELEC.tv:
    • docker: update to 1.11.2 (PR:429, 1 commit, 4 files changed)
  3. XBMC:
    • VideoPlayer: switch back to Kodi method of counting CPUs (PR:9931, 3 commits, 1 file changed)
    • VideoPlayer: keep value of m_vSyncAdjust on Discontinuity (PR:9932, 1 commit, 2 files changed)
  4. newclock5:
    • New commits in this build:
      • omxvideo: Remove call to AutoInterlaceMethod. Treat auto as advanced (a73a431e)
      • mmalcodec: Treat corrupt frames as dropped (5ae49559)
    • Commits no longer in build:
      • VideoPlayer: keep value of m_vSyncAdjust on Discontinuity (539ae074)
      • Revert "VideoPlayer: remove now unused header from ffmepg" (6068843d)
      • VideoPlayer: switch back to Kodi method of counting CPUs (13928a48)
      • VideoPlayer: drop useless ifdef (d445f3d7)
      • fixup! rbp: Support zero copy interface with hevc acceleration (07a5228d)
  5. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:431: Revert "Merge pull request #136 from lrusak/modesetting"
    • Added: [env] PR:434: linux: Update to 4.6.2
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Hey guys sorry if this has been asked

Is there an updated for libreElec like the openelec DEVupdater from leopard?
(2016-06-09, 00:41)Alex_rpi Wrote: Hey guys sorry if this has been asked

Is there an updated for libreElec like the openelec DEVupdater from leopard?

2344896 (post)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
  •   
  • 1
  • 52
  • 53
  • 54(current)
  • 55
  • 56
  • 218
  •   
  Thread Closed
 
Thread Rating:
  • 19 Vote(s) - 4.63 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for RaspberryPi (Kodi 17.0)4.6319