•   
  • 1
  • 79
  • 80
  • 81(current)
  • 82
  • 83
  • 187
  •   
  Thread Closed
v17 LibreELEC Testbuilds for x86_64 (Kodi 17.0)
(2016-07-20, 07:54)FernetMenta Wrote: For some reason your system forces deinterlacing which does not make much sense. That is a maximum stupid mode that should be removed. The question is why it got activated in this build.


I have deinterlace set to AUTO for all videos so not sure why it would kick on when not needed. Can I set deinterlace to none in TV and auto in live tv and will it stick separately or is that a full system wide setting like I think it is?
No, that's currently not possible, but:
I am not sure that's the case. The setting is per Video / channel. So 100% verify that this specific channel was not forced to ON by you, please.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
@fritsch: As i just saw your last posting here from a few minutes ago Angel. Are you already aware of the issue mentioned below?

(2016-07-18, 18:16)Milhouse Wrote:
(2016-07-18, 18:00)mule1 Wrote:
(2016-07-14, 20:04)mule1 Wrote: Here we go!

Kodi log: http://pastebin.com/q7ZufGSV
Crash log: http://pastebin.com/9sGh4JtX

@Milhouse: Any idea whats going wrong with Dolby TrueHD-Sound in cunjunction with audio passthrough since build #0626? Is it an issue with ffmpeg3.1?

I think this is probably one for @fritsch who may have an idea what is causing it.

We were able to reproduce using this sample: http://fritsch.fruehberger.net/samples/h...-DWEU.m2ts
(2016-07-20, 11:47)pyrodex Wrote:
(2016-07-20, 07:54)FernetMenta Wrote: For some reason your system forces deinterlacing which does not make much sense. That is a maximum stupid mode that should be removed. The question is why it got activated in this build.


I have deinterlace set to AUTO for all videos so not sure why it would kick on when not needed. Can I set deinterlace to none in TV and auto in live tv and will it stick separately or is that a full system wide setting like I think it is?

It does not look like this. The code path that triggers this log:
ERROR: CMixer::InitCycle - interlace method: 1 not supported, setting to AUTO

is only executed if deinterlacing mode (not method) is set to on (forced)
(2016-07-20, 12:07)fritsch Wrote: No, that's currently not possible, but:
I am not sure that's the case. The setting is per Video / channel. So 100% verify that this specific channel was not forced to ON by you, please.

I ran a test again this morning and ensured it was set to AUTO across the board for all files and then while playing the video I even turned it off which had no effect. I've uploaded a new log on #719 and also a video showing the OFF setting and the skipping frames in the background in the detailed on screen information. FYI I've always used AUTO/AUTO for this setting and let kodi decide when to deinterlace based on the material since I watch a good amount of live TV that is deinterlaced on my units.

Kodi.log - http://sprunge.us/VIcV
Video - https://www.dropbox.com/s/nsoomo6mbcrz10...M.mov?dl=0

Let me know if you need anything else I can provide.
Something is messed up with settings in these builds:

06:31:28 102.179161 T:139637015939136 DEBUG: ------ Window Init (DialogSettings.xml) ------
06:31:28 102.180824 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.deinterlacemode) was not found.
06:31:28 102.180885 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.interlacemethod) was not found.
06:31:28 102.180962 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.scalingmethod) was not found.
(2016-07-20, 13:20)FernetMenta Wrote: Something is messed up with settings in these builds:

06:31:28 102.179161 T:139637015939136 DEBUG: ------ Window Init (DialogSettings.xml) ------
06:31:28 102.180824 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.deinterlacemode) was not found.
06:31:28 102.180885 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.interlacemethod) was not found.
06:31:28 102.180962 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.scalingmethod) was not found.

Is this my side or the Librelec/Kodi side? I didn't change anything from #716 (working) to #717-#719 and the issues persist.
Kodi master has no issue. I guess something on LE side went wrong.
(2016-07-20, 13:20)FernetMenta Wrote: Something is messed up with settings in these builds:

06:31:28 102.179161 T:139637015939136 DEBUG: ------ Window Init (DialogSettings.xml) ------
06:31:28 102.180824 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.deinterlacemode) was not found.
06:31:28 102.180885 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.interlacemethod) was not found.
06:31:28 102.180962 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.scalingmethod) was not found.

I see this in Ubuntu too, with latest Kodi master, so not specific to these builds: http://sprunge.us/QJTd (this is a totally "clean" .kodi - everything default. I only added a single entry to source.xml in order to load a local video)

Although the "not found" message is being output, if you change a setting in one of the dialogs it will be stored and subsequently loaded next time the dialog is opened, eg. set audio.volume to -20db and it will be saved/loaded despite the "not found" message appearing each time the Audio dialog is opened. So this looks like some weird behaviour of CSettingsManager that's always been there, but may only affect certain platforms (Fernet doesn't see this on OSX, I see it on Ubuntu and LE).

I've gone back to LE build #0601 and this CSettingsManager behaviour is the same there, so hasn't been introduced with build #0717 - build #0716 also has this same CSettingsManager behaviour.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2016-07-12, 22:17)QLink Wrote:
(2016-07-07, 22:56)Milhouse Wrote:
(2016-07-07, 22:45)QLink Wrote: vu+ pvr service does not start automatically after restart. when i deactivate/activate the service it works and channels+epg is loading from pvr backend...

i'm on 3rd of july testbuild...
No debug log (wiki), no problem.

here is log file: https://paste.ee/p/X8cFS

best greetz

p.s. i tried 11th of july build but got same problem

anything new about this problem. tried the latest testbuild, but still error msg "pvr addon could not be loaded" when i deactivate/reactivate it in addon menu it works ...
(2016-07-20, 21:41)QLink Wrote: anything new about this problem. tried the latest testbuild, but still error msg "pvr addon could not be loaded" when i deactivate/reactivate it in addon menu it works ...

Nobody really wants to decipher 4 or 5 random logs which may or may not contain any relevant error. Upload a single debug log.

The best way to upload a debug log is to enable debug logging, reboot, reproduce the error, then log in with ssh and run
Code:
cat /storage/.kodi/temp/kodi.log | pastebinit
and then finally, paste the url in this thread.

Based on the errors I saw in your first log before giving up, it looks like you're using a skin (Aeonmq5 Helixmod) that isn't compatible with Krypton so test only with Estuary.

You might also want to enable "Wait for network" in the LE Settings addon as it appears you don't have a network when Kodi starts.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
New LibreELEC.tv Krypton build #0720: Generic
(Supercedes previous build)

Code:
# uname -a
Linux NUC 4.7.0-rc7 #1 SMP Wed Jul 20 21:08:40 BST 2016 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse) - Version: devel-20160720210643-#0720-g19b259b [Build #0720]

Based on tip of LibreELEC.tv master (19b259b9, changelog) and tip of XBMC master (e1f73d5f, changelog) with the following modifications:
  • Includes FernetMenta "VideoPlayer" patches
  • Includes latest kodi-platform master (c8188d82)
  • Includes latest libcec master (6d68d212)
  • Includes latest libnfs master (fac3a954, ahead +34)
  • Includes latest p8-platform master (041a8c6c, ahead +1)
  • Includes latest addons: inputstream.mpd (aad30ba0, +13), inputstream.rtmp (7bf2298e), inputstream.smoothstream (31e7afef, +3), peripheral.joystick (6090a90e, +1), pvr.argustv (e536f32e), pvr.demo (01c68c88), pvr.dvblink (0bf16840, +1), pvr.dvbviewer (35902f5d), pvr.filmon (efd379b8), pvr.hdhomerun (a71e816d), pvr.hts (856e72a4, +1), pvr.iptvsimple (1ea1f36e), pvr.mediaportal.tvserver (3ba23b7b, +1), pvr.mythtv (1bcf081a, +5), pvr.nextpvr (ecbd6e5c, +1), pvr.njoy (b5d65655), pvr.pctv (12d8baf1), pvr.stalker (4e9b11c8, +5), pvr.vbox (36d3717b, +1), pvr.vdr.vnsi (d7bc89eb, +5), pvr.vuplus (d7f5685a, +1), pvr.wmc (1f3240da, +1)
  • Includes commits from xbmc/master, ahead +2 (FernetMenta)
  • Include [env] e7cbe9cb: xf86-video-intel: Explicitely disable TearFree and TripleBuffer
  • Include [env] ed774729: Intel: Implement Passthrough-Range
  • Include [env] 98c65e6a: Kodi: Use Limited Range by default
  • Include [env] patch: Add kodi binary addons (pvr, adsp, other)
  • Include [env] patch: Don't build ADSP addons
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: Install libbrcmEGL/libbrcmGLESv2 shared libraries, with sym links for backward compatability
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: ffmpeg: bump 3.1.1
  • Include [env] PR:481: linux: Update to 4.7 (WIP)
  • Include [env] PR:526: Cpu temperature readings for devices with aml_thermal interface
  • Include [env] PR:535: init: Add upgrade check to avoid incompatible upgrades [RFC,WIP]
  • Include [env] PR:546: systemd: Do not unmount /storage and /flash at shutdown as this always fails
  • Include [env] PR:548: connman: bump to 1.33
  • Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  • Include [pkg] 441217d8: logging: Add microsecond timer to log messages (kodi)
  • Include [pkg] patch: drm/i915: Extend Fake HDMI live status to Valley View (linux)
  • Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
  • Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  • Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  • Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  • Include [pkg] PR:9803: [PeripheralCecAdapter] fix playback stopping on screensaver deactivated
  • Include [pkg] PR:10141: set tvshow thumb on *all seasons node
Build Highlights:
  1. New VideoDB schema v107
Build Details:
  1. LibreELEC.tv:
    • Update remote-config (PR:550, 1 commit, 1 file changed)
    • Licence updated (PR:547, 1 commit, 2 files changed)
  2. XBMC:
    • Add the ability to store more than one online id (PR:10000, 1 commit, 17 files changed)
    • [depends][xbmc][fix] Get rid of wdk requirement (PR:10143, 1 commit, 20 files changed)
    • mmalrender: Allow a frame of slop when waiting for vsync (PR:10144, 2 commits, 3 files changed)
    • [cmake/cpack] Debian packages generation (PR:9987, 7 commits, 35 files changed)
    • MMAL: Move deinterlacer from decoder to renderer (PR:10120, 8 commits, 7 files changed)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2016-07-20, 16:51)Milhouse Wrote:
(2016-07-20, 13:20)FernetMenta Wrote: Something is messed up with settings in these builds:

06:31:28 102.179161 T:139637015939136 DEBUG: ------ Window Init (DialogSettings.xml) ------
06:31:28 102.180824 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.deinterlacemode) was not found.
06:31:28 102.180885 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.interlacemethod) was not found.
06:31:28 102.180962 T:139637015939136 DEBUG: CSettingsManager: requested setting (video.scalingmethod) was not found.

I see this in Ubuntu too, with latest Kodi master, so not specific to these builds: http://sprunge.us/QJTd (this is a totally "clean" .kodi - everything default. I only added a single entry to source.xml in order to load a local video)

Although the "not found" message is being output, if you change a setting in one of the dialogs it will be stored and subsequently loaded next time the dialog is opened, eg. set audio.volume to -20db and it will be saved/loaded despite the "not found" message appearing each time the Audio dialog is opened. So this looks like some weird behaviour of CSettingsManager that's always been there, but may only affect certain platforms (Fernet doesn't see this on OSX, I see it on Ubuntu and LE).

I've gone back to LE build #0601 and this CSettingsManager behaviour is the same there, so hasn't been introduced with build #0717 - build #0716 also has this same CSettingsManager behaviour.

Milhouse any thoughts here on the fix or is it kodi based for ubuntu? Not sure why #717+ is affected but tonight on #719 I started a fresh .kodi directory and still experienced it out of the box.
The CSettingsManager behaviour is the same on all platforms, FernetMenta was eventually able to reproduce on OSX also so this is almost certainly not the cause of your problem. We'll need to wait for FernetMenta to suggest a fix.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2016-07-20, 22:01)Milhouse Wrote:
(2016-07-20, 21:41)QLink Wrote: anything new about this problem. tried the latest testbuild, but still error msg "pvr addon could not be loaded" when i deactivate/reactivate it in addon menu it works ...

You might also want to enable "Wait for network" in the LE Settings addon as it appears you don't have a network when Kodi starts.

That did the trick !
Now pvr addon starts without error msg ...

strange that i didn't need that setting with kodi 16.1 ...

Thanks anyway for your help milhouse Smile
  •   
  • 1
  • 79
  • 80
  • 81(current)
  • 82
  • 83
  • 187
  •   
  Thread Closed
 
Thread Rating:
  • 11 Vote(s) - 3.91 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for x86_64 (Kodi 17.0)3.9111