2016-12-31, 13:05
Hi,
also my thanks to @wesk05, the CEA 861-F timings did the trick!
with this timings I finally got 2160p50 with the Asrock J4205-itx and a Panasonic CXW754, it seems the Pana is more strict about the timings and I'm very happy that the Magachips MCDP2800 is not the issue.
btw is there any tool to calculate the CEA 861-F modlines like cvt or umc?
@fritsch your xorg.conf is working also fine here
CU
9000h
also my thanks to @wesk05, the CEA 861-F timings did the trick!
Code:
xrandr -display :0 --newmode "3840x2160_50.00" 594.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync
xrandr -display :0 --addmode DP2 3840x2160_50.00
xrandr -display :0 --output DP2 --mode 3840x2160_50.00
with this timings I finally got 2160p50 with the Asrock J4205-itx and a Panasonic CXW754, it seems the Pana is more strict about the timings and I'm very happy that the Magachips MCDP2800 is not the issue.
btw is there any tool to calculate the CEA 861-F modlines like cvt or umc?
@fritsch your xorg.conf is working also fine here
Code:
xrandr -d :0 -q
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP2 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 1280mm x 720mm
3840x2160@50p 50.00*+
3840x2160 30.00 + 25.00 24.00 29.97 23.98
4096x2160 24.00 23.98
3840x2160@60p 60.00
2560x1440 59.95
1920x1080@50p 50.00
1920x1080@60p 60.00
1920x1080 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
[email protected] 59.94
1920x1080@24p 24.00
1920x1080i 60.00 50.00
1920x1080@23p 23.98
1366x768 59.79
1280x720 60.00 50.00 59.94
1024x768 60.00
720x576 50.00
720x480 60.00 59.94
640x480 60.00 59.94
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
CU
9000h