[doldi]

..if you have a problem in chrome with this link: http://milhouse.libreelec.tv/builds/master/RPi2/ i can't help you, sorry...unlink/reset your router ?

[mikeb8591]

Check that your adaptive seek settings are not screwed up.

It would also be worth testing with a clean .kodi (and default settings):

Thank you! The problem didn't exist with the new .kodi, and when I merged the guisettings.xml back into mine, and deleted an 'advancedsettings.xml' file I still had laying around (with adaptive settings in it as well) the problem seems to have gone away.

[rudrood]

hello Sjak,
my download over PC of the recent build needs only 2-3 min in germany.
Also over RPi/libreelec/System/update channel - Milhouse 8/ avaible Versions there is no problem (1m54s).
[http://milhouse.libreelec.tv/builds/master/RPi2/]

Nope. Still slow and chrome breaks off the download.. I'm in the Netherlands (but very close to German border)

There is something wrong with the routing from the Netherlands to milhouse.libreelec.tv, when I use a VPN connection via the same ISP (Ziggo) the filetransfer is fast again.

[Milhouse]

New LibreELEC.tv Krypton build #1229: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.9.0 #1 Thu Dec 29 21:03:17 GMT 2016 armv6l GNU/Linux

# vcgencmd version
Dec 23 2016 16:46:02
Copyright (c) 2012 Broadcom
version 18a9fe64e58d73e303bf09b176fe63ddb7994a0c (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20161229210216-#1229-g171d37e [Build #1229]

# Kodi version
(18.0-ALPHA1 Git:eed32e7). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (171d37e8, changelog) and tip of XBMC master (61cba329, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.9.y
  
• Includes latest bcm2835-driver next (da504fcd, ahead +610)
  
• Includes latest kodi-platform master (c8188d82)
  
• Includes latest libcec master (12fa2750, ahead +2)
  
• Includes latest libnfs master (43cde9da, ahead +32)
  
• Includes latest p8-platform master (2d90f986, ahead +9)
  
• Includes latest addons: inputstream.adaptive (fc862638), inputstream.rtmp (55437ac7), peripheral.joystick (987a818e), pvr.argustv (4702a9e7, +3), pvr.demo (99db6bf5, +3), pvr.dvblink (4e6992d9, +3), pvr.dvbviewer (2b8ab246, +12), pvr.filmon (a23db0c5, +3), pvr.hdhomerun (baeafbde, +3), pvr.hts (117d4020, +4), pvr.iptvsimple (df0649e7, +5), pvr.mediaportal.tvserver (f00ccfd3, +16), pvr.mythtv (41c3201f), pvr.nextpvr (48a7796a, +4), pvr.njoy (d1ad569b, +3), pvr.octonet (8549a31c), pvr.pctv (b8286a23, +3), pvr.stalker (dfda4c51, +3), pvr.vbox (bfa938c7, +9), pvr.vdr.vnsi (36023a36, +8), pvr.vuplus (acd75dc5, +3), pvr.wmc (35be514e, +3)
  
• Exclude [env] tvheadend42-03_gcc6.patch: tvheadend42: No longer required after https://github.com/tvheadend/tvheadend/c...b1ef326412
  
• Include [env] dba5e31d: TexturePacker: Hack to work around CMAKE_SOURCE_DIR
  
• Include [env] 9f3d3854: kodi: alternative method to disable wiimote if bluetooth is disabled
  
• Include [env] 40644b02: kodi: fix cmake after move to root
  
• Include [env] patch: Don't build ADSP addons
  
• Include [env] patch: FFmpeg: Bump to final 3.1.6-Krypton
  
• Include [env] patch: kodi: fix intel gpu detection patch after kodi/10848
  
• Include [env] patch: iwlwifi-firmware: update to iwlwifi-firmware-ba301aa
  
• Include [env] patch: linux: use in-tree rtl8192cu for RPi/RPi2
  
• Include [env] patch: repository.retroplayer.libreelec.addons: add temp repo for testing
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, other)
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] PR:1025: scripts/create_addon: use PKG_REV as part of the binary addon version
  
• Include [env] PR:1052: Package updates
  
• Include [env] PR:1067: vaapi hvec 10bit support
  
• Include [env] PR:1101: Update lirc
  
• Include [pkg] PR:249: Fix ass_set_cache_limits() to work with composite cache (libass)
  
• Include [pkg] PR:11163: Fix silent failure when game add-on can't be installed
  
• Include [pkg] PR:11298: [PVR][music][video] Video Fullscreen/Music Visualisation: Fix hiding of player info
  

Build Highlights:

1. Create symbolic links for systemd unit aliases
   
2. PVR and GUI fixes
   
3. PR:11298: [PVR][music][video] Video Fullscreen/Music Visualisation: Fix hiding of player info
   

Build Details:

1. LibreELEC.tv:
   • Create symbolic links for systemd unit aliases (PR:1100, 2 commits, 2 files changed)
     
   • linux: drop obsolete and never used patch (PR:1102, 1 commit, 1 file changed)
     
2. XBMC:
   • [gui] allow %-values for origin, camera and animation attribs (PR:11233, 1 commit, 4 files changed)
     
   • [guilib] implicit referencing for listitem bools / ints (PR:11205, 1 commit, 2 files changed)
     
   • [Cleanup] silent some warnings (PR:11272, 2 commits, 7 files changed)
     
   • [PVR] Fix PVR Manager crash on startup (PR:11283, 2 commits, 3 files changed)
     
   • [guiinfo][PVR] Fix 'player.starttime' and 'player.finishtime' (PR:11285, 1 commit, 1 file changed)
     
   • [PVR] PVR windows: Fix item selection on window update. (PR:11270, 1 commit, 1 file changed)
     
   • AESinkDirectSound: Clamp samplerate to max 192 khz (PR:11296, 1 commit, 1 file changed)
     
   • [gui] DialogSeekbar should use g_application.GetPercentage() for progress info (PR:11125, 2 commits, 2 files changed)
     
   • [docs] fix typo in README.debian (60fa9a24)
     
3. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [pkg] PR:11298: [PVR][music][video] Video Fullscreen/Music Visualisation: Fix hiding of player info
     

[Jezze]

Im so tired about that iptv backend. It plays fine about 30-60 seconds and then disconnects every channel. Same channels works fine with my LG smart tv app. I already asked here who should i report but havent got any answer. Log is also pasted here. And yes, that works fine with stable version of kodi/libreelec.

[Milhouse]

Im so tired about that iptv backend. It plays fine about 30-60 seconds and then disconnects every channel. Same channels works fine with my LG smart tv app. I already asked here who should i report but havent got any answer. Log is also pasted here. And yes, that works fine with stable version of kodi/libreelec.

You've said:

I try watch tv channels with iptv backend, works fine about 30 seconds and then every channels stops. Works fine with latest stable build but not with this one. There is my log: http://pastebin.com/yNHbKrg4

By latest stable to you mean Jarvis or Krypton?
Has this worked on a previous Milhouse build?

Works fine with Jarvis, never been worked with Milhouse build.

This doesn't sound that likely, to be honest, unless it's a VideoPlayer related issue which is all new code in Kodi 17.

Either you've not tested all the builds (both these Kodi 18 builds, and also the older Kodi 17/Krypton and even Kodi 16/Jarvis based test builds), or there is something in your system that is causing this issue - see the earlier post from mikeb8591 who had an issue caused by an advanced setting that nobody else would have, so would be unable to reproduce the issue he had.

If you still have the problem with a "clean" .kodi (no third-party add-ons, all default settings) then start testing with older builds.

To test the older builds, pick builds at the beginning of each month and see if they have the problem - if they do then test the build from the month before and repeat until you find a build without the problem. Once you find a build without the problem, start installing newer daily builds until you find the first build with the issue.

If you can identify the first build with this problem then you stand a better chance of a fix.

You could also test LibreELEC 7.90.010 which is the latest Kodi 17b7 based official release and confirm if that also has the problem.

[Sjak]

hello Sjak,
my download over PC of the recent build needs only 2-3 min in germany.
Also over RPi/libreelec/System/update channel - Milhouse 8/ avaible Versions there is no problem (1m54s).
[http://milhouse.libreelec.tv/builds/master/RPi2/]

Nope. Still slow and chrome breaks off the download.. I'm in the Netherlands (but very close to German border)

There is something wrong with the routing from the Netherlands to milhouse.libreelec.tv, when I use a VPN connection via the same ISP (Ziggo) the filetransfer is fast again.

Seems to have done the trick... Thanks

[nuwonda]

is there another way to wake up kodi from it's dimmed state other than reboot from terminal or unplugging power? this mostly happens after I switch to another input on my av receiver (eg play wii or ps3) and come back to the kodi hdmi after a while, kodi will then be dimmed and won't react to any key from the remote.

Is this a CEC issue?
Can you test if it works with a USB keyboard or phone remote?

happened again with 1228, kodi was dimmed and the kodi app remote could wake up kodi whereas the tv remote did not work at all

[Pasadena09]

#1228

i could not change the audio Stream in OSM to the german Stream. The window to change it dos not open.

Sorry for my very bad english.

best regreets

[Milhouse]

@Pasadena09 can you enable debug logging and try to change the audio stream, then upload your log. Also, test only with Estuary, in case you're using a third party skin.

[Pcp12]

Hi, I was trying to install transmission service in this build but I cant install from zip ("Failed to install addon from zip file") and from superrepo (I click on install and nothing). I have also tried with kodi 17 builds but the same. Sorry for my english, it is terrible.

[Milhouse]

Hi, I was trying to install transmission service in this build but I cant install from zip ("Failed to install addon from zip file") and from superrepo (I click on install and nothing). I have also tried with kodi 17 builds but the same. Sorry for my english, it is terrible.

SuperRepo is a banned repository.

Transmission isn't supported by LibreELEC as a Kodi add-on - you'll need to use the Docker add-on and then install Trasnmission within Docker. See the LibreELEC forum for more details.

[Pcp12]

Hi, I was trying to install transmission service in this build but I cant install from zip ("Failed to install addon from zip file") and from superrepo (I click on install and nothing). I have also tried with kodi 17 builds but the same. Sorry for my english, it is terrible.

SuperRepo is a banned repository.

Transmission isn't supported by LibreELEC as a Kodi add-on - you'll need to use the Docker add-on and then install Trasnmission within Docker. See the LibreELEC forum for more details.

Finally, it works, I have been able to install server Transmission in LibreELEC, even if it is not supported

[Deepjungle]

Greetings,

i have some problems to attach my external Raidsonic RAID5 drive. The last version where the drive is detected is LibreELEC-RPi2.arm-8.0-Milhouse-20161022210415-#1022-g69bca63. I tried some builds after this one but no one could detect the drive and mount it automatically. With the next following build it is broken (LibreELEC-RPi2.arm-8.0-Milhouse-20161023211451-#1023-gd47dcd5). The last build i have found (LibreELEC-RPi2.arm-8.0-Milhouse-20161229210216-#1229-g171d37e) is broken too.

This is the dmesg output:

Code:

[    8.723994] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    8.814572] usb 1-1.3: New USB device found, idVendor=152d, idProduct=0567
[    8.814580] usb 1-1.3: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[    8.814584] usb 1-1.3: Product: USB to ATA/ATAPI Bridge
[    8.814587] usb 1-1.3: Manufacturer: JMicron
[    8.814591] usb 1-1.3: SerialNumber: 152D00539000
[    8.815201] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    8.815370] scsi host0: usb-storage 1-1.3:1.0
[    9.289995] Bluetooth: Core ver 2.21
[    9.290081] NET: Registered protocol family 31
[    9.290086] Bluetooth: HCI device and connection manager initialized
[    9.290103] Bluetooth: HCI socket layer initialized
[    9.290116] Bluetooth: L2CAP socket layer initialized
[    9.290144] Bluetooth: SCO socket layer initialized
[    9.299235] Bluetooth: HCI UART driver ver 2.3
[    9.299247] Bluetooth: HCI UART protocol H4 registered
[    9.299252] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    9.299457] Bluetooth: HCI UART protocol BCM registered
[    9.837810] scsi 0:0:0:0: Direct-Access     H/W RAID 5                0523 PQ: 0 ANSI: 6
[    9.838702] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[    9.840231] sd 0:0:0:0: [sda] 17581277184 512-byte logical blocks: (9.00 TB/8.19 TiB)
[    9.840239] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    9.840422] sd 0:0:0:0: [sda] Write Protect is off
[    9.840429] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
[    9.840579] sd 0:0:0:0: [sda] No Caching mode page found
[    9.840584] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    9.844031] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[    9.951667]  sda: sda1 sda2
[    9.952421] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[    9.952931] sd 0:0:0:0: [sda] Attached SCSI disk

Output of mount on working build 1022.

Code:

/dev/sda2 on /var/media/RAID3 type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)

The external drive is RaidSonic Icy Box IB-RD3640SU3 configured as RAID5 with 4x3TB Seagate drives.

It would be nice if someone could help me with this.

Greetings

Deepjungle

P.S.: Drive is formated as NTFS.

[Milhouse]

Greetings,

i have some problems to attach my external Raidsonic RAID5 drive. The last version where the drive is detected is LibreELEC-RPi2.arm-8.0-Milhouse-20161022210415-#1022-g69bca63. I tried some builds after this one but no one could detect the drive and mount it automatically. With the next following build it is broken (LibreELEC-RPi2.arm-8.0-Milhouse-20161023211451-#1023-gd47dcd5). The last build i have found (LibreELEC-RPi2.arm-8.0-Milhouse-20161229210216-#1229-g171d37e) is broken too.

Build #1023 includes a kernel bump to 4.8.4 from 4.8.2, but there's no obvious reason why your hardware is no longer detected - there are no config option changes that would remove a feature that was present in 4.8.2.

Can you provide a _full_ dmesg when booting #1022 and then again with #1023, both times with the drive connected - please use a pastebin site (easiest method with LibreELEC is: "dmesg | pastebinit") and then post the links.