• 1
  • 2
  • 3
  • 4(current)
  • 5
  • 6
  • 495
v18 LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)
#46
Thanks doldi and fightnight for the tips to get KODI back up again.
I deleted the inputstream.mpd, and it froze at further place on startup, as shown by the on screen log.
Then I deleted the inputstream.smoothstream and the boot completed!
Didn't have to nuke the database (yet?)
#47
New LibreELEC.tv Krypton build #1206: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.8.12 #1 Tue Dec 6 22:17:37 GMT 2016 armv6l GNU/Linux

# vcgencmd version
Dec  1 2016 17:33:24
Copyright (c) 2012 Broadcom
version 0b89c6d8c5820e2b81576a7d2e80b93120fedd40 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20161206221635-#1206-g1215cb2 [Build #1206]

# Kodi version
(18.0-ALPHA1 Git:17.0-beta6-654f1b7). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (1215cb29, changelog) and tip of XBMC master (5e57a75f, changelog) with the following modifications: Build Highlights:
  1. Update inputstream.adaptive with widevine decryption support (see OP note #6 for widevine installation details)
  2. Add temporary LE RetroPlayer repository with game emulators
    Access games via Internet Archive ROM Launcher (IARL):
    Quote:
    1. Download Zach Morris Repo and install from zip (don't use "Install from zip file" Home screen widget - use Add-ons > Add-on browser > Install from zip file)
    2. Install from repository > Zach Morris Add-ons > Game add-ons > Game providers > Internet Archive ROM Launcher
    3. Within IARL, install emulators, launch games etc.
Build Details:
  1. LibreELEC.tv:
    • emby: update to 3.0.8500 (PR:1019, 4 commits, 5 files changed)
    • imx6: update kodi, libcec and linux 3.14 patches (PR:1021, 1 commit, 7 files changed)
    • Revert "Inputstream.adaptive: include decrypter lib" (PR:1030, 1 commit, 1 file changed)
    • merge /usr like it's 2012 (PR:805, 47 commits, 59 files changed)
    • kodi use cmake (PR:768, 7 commits, 14 files changed)
    • package updates (PR:1006, 19 commits, 20 files changed)
      • libinput: update to 1.5.2
      • xkeyboard-config: update to 2.19
      • xf86-input-evdev: update to 2.10.4
      • xf86-input-libinput: update to 0.22.0
      • xf86-video-amdgpu: update to 1.1.2
      • libX11: update to 1.6.4
      • libXfixes: update to 5.0.3
      • libXi: update to 1.7.8
      • libXrandr: update to 1.5.1
      • libXrender: update to 0.9.10
      • libXtst: update to 1.2.3
      • xproto: update to 7.0.31
      • xf86-video-intel: update to 9ac7a33
      • xf86-video-ati: update to 7.8.0
      • xf86-video-amdgpu: update to 1.2.0
      • xf86-video-vmware: update to 13.2.1
      • xf86-video-nvidia: update to 375.20
      • libdrm: update to 2.4.74
      • mesa: update to 13.0.2
    • intel-ucode: bump to 20161104 (PR:1022, 1 commit, 1 file changed)
    • projects/WeTek_Play,WeTek_Core: fix CEC (PR:1031, 1 commit, 2 files changed)
    • build: implement PKG_PATCH_DIRS (PR:1020, 2 commits, 26 files changed)
    • brcmap6xxx-aml: fix after /usr merge (PR:1034, 1 commit, 1 file changed)
    • brcmfmac_sdio-firmware-aml: use unified /usr (PR:1035, 1 commit, 1 file changed)
    • inputstream.adaptive: bump to include decrypter lib (05decce3)
    • inputstream.adaptive: include decrypter lib (e09c9e32)
  2. XBMC:
    • [PVR] Fix PVR channel OSD display conditions. (PR:11054, 1 commit, 1 file changed)
    • allow absolute item focus (PR:11019, 1 commit, 2 files changed)
    • [PVR][EPG] Feature: gridcontainer orientation (PR:10795, 1 commit, 4 files changed)
    • FileBrowser: fix multiple item selection (PR:11011, 1 commit, 2 files changed)
    • BinaryAddonCache: Fix deadlock (PR:11057, 1 commit, 1 file changed)
    • fixed: tag updates on shoutcast streams with low meta data intervals (PR:11061, 1 commit, 2 files changed)
    • [python] allow setting the videoinfotag path (PR:11012, 1 commit, 2 files changed)
    • [cmake] Fix FindXSLT.cmake typo (PR:11071, 1 commit, 1 file changed)
    • FIX: [droid;dyload] never dyload dependent sytem libs (PR:11059, 1 commit, 1 file changed)
    • Two game fixes (PR:11069, 2 commits, 3 files changed)
  3. inputstream.adaptive:
  4. peripheral.joystick:
    • Added buttonmap for PS4 controller (PR:68, 1 commit, 1 file changed)
    • Added buttonmap for PS4 controller (connected through USB) (PR:69, 1 commit, 1 file changed)
    • [buttonmaps/keyboard] Add simple configuration for 2048 (53127b1c)
  5. pvr.argustv:
  6. pvr.demo:
  7. pvr.dvblink:
  8. pvr.dvbviewer:
  9. pvr.filmon:
  10. pvr.hdhomerun:
  11. pvr.hts:
  12. pvr.iptvsimple:
  13. pvr.mediaportal.tvserver:
  14. pvr.mythtv:
    • 5.0.1 (PR:82, 2 commits, 3 files changed)
    • Initial Kodi v18 version. (47468724)
  15. pvr.nextpvr:
  16. pvr.njoy:
  17. pvr.pctv:
  18. pvr.stalker:
  19. pvr.vbox:
  20. pvr.vdr.vnsi:
  21. pvr.vuplus:
  22. pvr.wmc:
  23. newclock5:
    • New commits in this build:
      • remove autotools buildsystem (6c98c0a0)
      • test: Add advancedsetting for AC3 bitrate (83519f91)
      • testing: Try minimal libass cache size on all devices (8c3dddf0)
  24. kernel 4.8.y:
    • New commits in this build:
      • RPI-FT5406: Enable aarch64 support through explicit iomem interface (261d1779)
      • RPI-FT540: Enable aarch64 support through explicit iomem interface (#1740) (ca6ab40b)
      • BCM270X_DT: Add midi-uart0 overlay (e040b03a)
  25. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] patch: repository.retroplayer.libreelec.addons: add temp repo for testing
    • Added: [env] PR:1025: scripts/create_addon: use PKG_REV as part of the binary addon version
    • Added: [pkg] patch: cmake: Fix VAAPI DRM lib
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#48
Weekly kernel 4.9-rc8 test build #1206x: RPi / RPi2
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#49
Hi Milhouse

PR11054 didnt fix the live tv osd issues, and ive also notice channel manager does work anymore, nothing happens when selected.
Is there anything I can do to help find the issues.

Kind Regards

Bucky
#50
(2016-12-07, 11:19)bmonster Wrote: Is there anything I can do to help find the issues.

As always, please post a debug log when changing channel or accessing the channel manager, but this likely needs the input of a developer to get to the bottom of the issue.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#51
(2016-12-06, 23:26)zaphod24 Wrote: Has anyone else seen a change in CEC behavior since updating to Kodi 18? Even with the CEC adapter disabled under inputs, every time we power on the TV it sets the input to the HDMI port where my RPi3 is plugged in. It was not doing that with the last Kodi 17 build. It slightly annoys my family when they expect the input to be what it was when the TV was powered off...

Can you enable CEC component specific debugging in kodi, and normal debug logging.
ssh in and run:
Code:
vcgencmd vcos log set cec trace
systemctl restart kodi

Then power off and on the TV (or whatever it is you do that provokes the unwanted behaviour). Grab logs and post the URLs
Code:
pastebinit /storage/.kodi/temp/kodi.log
vcdbg log msg 2>&1 | pastebinit
#52
(2016-12-07, 11:24)Milhouse Wrote:
(2016-12-07, 11:19)bmonster Wrote: Is there anything I can do to help find the issues.

As always, please post a debug log when changing channel or accessing the channel manager, but this likely needs the input of a developer to get to the bottom of the issue.


Hopefully something in here helps.

switched debug on, rebooted, started tv channel, changed channel a couple of times, and thats it.

http://sprunge.us/KCKI

Bucky
#53
Hi All
During the last builds that I installed in the raspberry Pi3, I always end in a loop of the device after the installation: the Kodi logo is shown again and again

Can you please help? this happened with the last night build and also with the last previous that I installed from 26 Nov.

I already tried to copy manually some files to the SD card as described below but it does not solve the issue

thanks



Open the tar file and extract the KERNEL and SYSTEM files from the "target" folder. Copy these two files to your FAT partition, renaming KERNEL to kernel.img. Then try booting again. Sounds like your SD card glitched during the first boot.

If you need to copy the bootloader files too, then you'll find these in the 3rdparty/bootloader folder of the tar file - copy the *.dtb, fixup.dat, bootcode.bin and start.elf files to the FAT partition.
#54
(2016-12-06, 23:26)zaphod24 Wrote: Has anyone else seen a change in CEC behavior since updating to Kodi 18? Even with the CEC adapter disabled under inputs, every time we power on the TV it sets the input to the HDMI port where my RPi3 is plugged in. It was not doing that with the last Kodi 17 build. It slightly annoys my family when they expect the input to be what it was when the TV was powered off...

No change here. I have the PI plugged into a Samsung TV by HDMI. Sound output is on an Onkyo stereo by HDMI. Turning on the PI turns on the TV and switches the source to the PI. Turning on the TV leaves the setting at the default cable box.

I have made changes to the default CEC control settings. I set the PI to not turn off the TV if it is turned off or rebooted. No sense in cycling the power for a nightly software load.

I have noticed on many occasions that the Onkyo NR-626 screws up or blocks CEC control. The only solution is to unplug the Onkyo for a minute to cause a full restart. Looking at the Amazon reviews of Onkyo home theater receivers this seems to be a widespread problem across many models.

Maybe some other component is causing your problem.
#55
(2016-12-07, 16:51)galopogos Wrote: Can you please help? this happened with the last night build and also with the last previous that I installed from 26 Nov.

Without a crashlog it's difficult to be sure, but you could try the advice from previous pages just in case...

Code:
rm -fr /storage/.kodi/addons/inputstream.*

If that doesn't work, post a link to your crashlog.

(2016-12-07, 16:51)galopogos Wrote: Open the tar file and extract the KERNEL and SYSTEM files from the "target" folder. Copy these two files to your FAT partition, renaming KERNEL to kernel.img. Then try booting again. Sounds like your SD card glitched during the first boot.

If you need to copy the bootloader files too, then you'll find these in the 3rdparty/bootloader folder of the tar file - copy the *.dtb, fixup.dat, bootcode.bin and start.elf files to the FAT partition.
Not sure where you got this from or why you posted it, but nobody has needed to follow this advice for at least 2 years...
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#56
I am currently trying to compile from source for imx6 but I am getting an error building the dvbhdhomerun driver.
Can anyone see what the issue might be and how to fix it?
I dont have a hdhomerun device so I could exclude that drive but I dont know where or how to do that either.

Any help appreciated

Image
#57
(2016-12-08, 02:15)brimur Wrote: I am currently trying to compile from source for imx6 but I am getting an error building the dvbhdhomerun driver.

OT post - you should start a thread on the LibreELEC.tv forum where there will be someone familiar with imx6 able to help.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#58
(2016-12-07, 14:46)popcornmix Wrote:
(2016-12-06, 23:26)zaphod24 Wrote: Has anyone else seen a change in CEC behavior since updating to Kodi 18? Even with the CEC adapter disabled under inputs, every time we power on the TV it sets the input to the HDMI port where my RPi3 is plugged in. It was not doing that with the last Kodi 17 build. It slightly annoys my family when they expect the input to be what it was when the TV was powered off...

Can you enable CEC component specific debugging in kodi, and normal debug logging.
ssh in and run:
Code:
vcgencmd vcos log set cec trace
systemctl restart kodi

Then power off and on the TV (or whatever it is you do that provokes the unwanted behaviour). Grab logs and post the URLs
Code:
pastebinit /storage/.kodi/temp/kodi.log
vcdbg log msg 2>&1 | pastebinit

http://sprunge.us/MJWD
http://sprunge.us/NXEZ

As info, my RPi3 plugs directly into the HDMI port of my Vizio TV
#59
New LibreELEC.tv Krypton build #1207: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.8.12 #1 Thu Dec 8 02:50:07 GMT 2016 armv6l GNU/Linux

# vcgencmd version
Dec  1 2016 17:33:24
Copyright (c) 2012 Broadcom
version 0b89c6d8c5820e2b81576a7d2e80b93120fedd40 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20161208024903-#1207-g0963abf [Build #1207]

# Kodi version
(18.0-ALPHA1 Git:17.0-beta6-654f1b7). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (0963abf3, changelog) and tip of XBMC master (fda83e4a, changelog) with the following modifications: Build Highlights:
  1. Drop PR11034 due to skin sync breakage - back soon...
  2. drm/vc4 kernel updates
Build Details:
  1. LibreELEC.tv:
    • addon depends: do not install in sysroot (PR:1018, 4 commits, 4 files changed)
    • build: fix build of wetekdvb for WeTek_Play (1) (PR:1036, 1 commit, 1 file changed)
    • xf86-input-synaptics: add package (PR:997, 1 commit, 2 files changed)
    • xf86-video-nvidia: update 96-nvidia.rules (PR:1037, 1 commit, 1 file changed)
    • docker: add aarch64 support (PR:1015, 5 commits, 8 files changed)
  2. XBMC:
    • [PVR] Fix trac #17108 (duplicate context menu entries for PVR recordings) (PR:11073, 1 commit, 1 file changed)
    • cec: fixup strings after PR 10775 (PR:11082, 1 commit, 1 file changed)
    • [estuary] sync (PR:11092, 1 commit, 176 files changed)
    • [osx/sdl] - fix wrong size in windowed mode (PR:11062, 2 commits, 2 files changed)
    • MMALRender: Reduce log spam (PR:11081, 1 commit, 3 files changed)
    • [Estouchy] Game support (PR:11084, 1 commit, 10 files changed)
  3. newclock5:
    • Commits no longer in build:
      • cec: fixup strings after PR 10775 (53c19876)
      • MMALRender: Reduce log spam (bb16362c)
  4. kernel 4.8.y:
    • New commits in this build:
      • Revert "drm/vc4: Force HDMI to connected." (8a4f4313)
      • Revert "drm/vc4: Add a debugfs node for tracking execution state." (36015c28)
      • raspberrypi-firmware: Define the MBOX channel in the header. (e85d177d)
      • raspberrypi-firmware: Export the general transaction function. (1515688e)
      • drm/fb-helper: Add a dummy remove_conflicting_framebuffers (7f25b6d7)
      • drm: Don't implement empty prepare_fb()/cleanup_fb() (f0f9402c)
      • drm/vc4: Disallow interlaced modes on DPI. (d01b9292)
      • drm/vc4: Fix handling of interlaced video modes. (cdf1adb6)
      • drm/vc4: Reject doublescan modes. (3520b4c9)
      • drm/vc4: Enable precise vblank timestamping for interlaced modes. (2b6f0d52)
      • drm/vc4: Enable/Disable vblanks properly in crtc en/disable. (5e4b59af)
      • drm/vc4: Don't force new binner overflow allocation per draw. (5c34096c)
      • drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit (a91e2356)
      • drm: Don't swallow error codes in drm_dev_alloc() (755b20ba)
      • drm/vc4: cleanup with list_first_entry_or_null() (61345f0e)
      • drm/vc4: Enable limited range RGB output on HDMI with CEA modes. (c8d672bd)
      • drm/vc4: Fall back to using an EDID probe in the absence of a GPIO. (6b6c09a0)
      • drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes. (58da297b)
      • drm/vc4: Fix support for interlaced modes on HDMI. (b04ef57c)
      • drm/vc4: Set up the AVI and SPD infoframes. (13f70778)
      • drm/vc4: Add support for double-clocked modes. (ac94ad1d)
      • drm/vc4: Add a mode for using the closed firmware for display. (cf0a617d)
      • drm/fb-helper: Add a dummy remove_conflicting_framebuffers (229c3aba)
      • BCM270X: Add an overlay for enabling the vc4 driver in firmware-KMS mode. (76e91254)
      • BCM2710: Drop incorrect HDMI HPD line from the DT. (3c974d00)
      • drm/vc4: Fix a couple error codes in vc4_cl_lookup_bos() (f6b4a2ec)
      • drm/vc4: Fix termination of the initial scan for branch targets. (7266c8e1)
      • drm/vc4: Add support for rendering with ETC1 textures. (024df4ef)
      • drm/vc4: Use runtime autosuspend to avoid thrashing V3D power state. (3f47de18)
      • drm/vc4: Add fragment shader threading support (9bffc6c2)
      • Revert "BCM2710: Drop incorrect HDMI HPD line from the DT." (634afa82)
      • Revert "config: Add SECOMP options from #1698" (7b304b77)
      • config: fixup (a8576ffa)
      • BCM270X_DT: Add i2c-sensor overlay (e3211aec)
      • BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) (4fb0209b)
  5. Additional commits/pull requests/changes not yet merged upstream:
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
#60
(2016-12-07, 17:49)Milhouse Wrote:
(2016-12-07, 16:51)galopogos Wrote: Can you please help? this happened with the last night build and also with the last previous that I installed from 26 Nov.

Without a crashlog it's difficult to be sure, but you could try the advice from previous pages just in case...

Code:
rm -fr /storage/.kodi/addons/inputstream.*

If that doesn't work, post a link to your crashlog.

(2016-12-07, 16:51)galopogos Wrote: Open the tar file and extract the KERNEL and SYSTEM files from the "target" folder. Copy these two files to your FAT partition, renaming KERNEL to kernel.img. Then try booting again. Sounds like your SD card glitched during the first boot.

If you need to copy the bootloader files too, then you'll find these in the 3rdparty/bootloader folder of the tar file - copy the *.dtb, fixup.dat, bootcode.bin and start.elf files to the FAT partition.
Not sure where you got this from or why you posted it, but nobody has needed to follow this advice for at least 2 years...
Thanks! The rm command worked! Those instructions were indeed old Smile you sent it to me about 2 years ago
  • 1
  • 2
  • 3
  • 4(current)
  • 5
  • 6
  • 495

Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)24