•   
  • 1
  • 78
  • 79
  • 80(current)
  • 81
  • 82
  • 304
  •   
v18 -  LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)
(2017-03-14, 14:50)J_E_F_F Wrote: I do:

Okay, that was key information. Everything now makes sense.
The PWR led is directly connected to the undervoltage detection circuit (PWR led going off is direct signal of under-voltage).
Forcing the PWR led means we can no longer detect under-voltage.
A commit yesterday means we avoid displaying the under-voltage signal when arm has forced the PWR led.
Reply
Sounds good, thank you.
Reply
(2017-03-14, 13:56)popcornmix Wrote:
(2017-03-14, 00:41)J_E_F_F Wrote: So far, no lightning bolt with 0313, perhaps this was a firmware issue that was resolved.

Not explicitly but there was a change to the gpio expander which is used by the under-voltage detection, but nothing that looks like it would fix your issue.
It may be something a little random that comes and goes with builds.

Can you confirm if the symbol ever disappears and reappears?
Or is it just spuriously on at boot and either stays on permanently or disappears, never to return?

It does sound like spurious reporting of under-voltage rather than an actual under-voltage condition.
Also if you see the symbol again, can you report output of "vcgencmd get_throttled"

as posted before, it definitely is an erroneous under-voltage reporting, which happens right after rainbow screen on bootup or reboot and goes away after 2 seconds. The ac (original pi hut brand) was measured with a multimeter and is 100% providing stable 5v.

It is gone with 313, for now...

Different issue since ... any build going back to v17, the display calibration is always lost/slightly deplaced (a few pixel) on bootup and more so on upgrades (a few more pixels). nothing that bothers anyone much i guess.
Reply
(2017-03-14, 21:27)nuwonda Wrote: Different issue since ... any build going back to v17, the display calibration is always lost/slightly deplaced (a few pixel) on bootup and more so on upgrades (a few more pixels). nothing that bothers anyone much i guess.

Ae you able to narrow down when this issue started (likely to be very tedious, I know).
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
New LibreELEC.tv Leia build #0314: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.10.2 #1 Wed Mar 15 01:54:08 GMT 2017 armv6l GNU/Linux

# vcgencmd version
Mar 13 2017 20:38:22
Copyright (c) 2012 Broadcom
version 9e38ec4b6d95d3a769dc6f8d3d78ee2f9d043850 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170315015305-#0314-g1b38cb9 [Build #0314]

# Kodi version
(18.0-ALPHA1 Git:93e9d69). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (1b38cb92, changelog) and tip of XBMC master (93e9d695, changelog) with the following modifications: Build Highlights:
  1. Reorganise project hierarchy, support devices
  2. Drop LibreSSL, switch back to OpenSSL (this will break some addons until updates are available, but should fix DAZN/post-2038 cert expiry etc.)
  3. Remove all kodi project and arch specific patches (note: I'll continue including them as long as I'm able)
  4. tvheadend42 and vdr-addon updated (see addons)
Build Details:
  1. LibreELEC.tv:
    • linux: update to linux-4.10.2 (PR:1440, 8 commits, 7 files changed)
    • libfmt: add package, add as a new kodi dependency (PR:1426, 2 commits, 2 files changed)
    • pycryptodome: add package, remove pycrypto (PR:1404, 4 commits, 3 files changed)
    • kodi: adjust cputemp/gputemp script (PR:1348, 1 commit, 1 file changed)
    • $DEVICE naming changes (PR:1356, 2 commits, 2 files changed)
    • merge xml files during installation of kodi (PR:1347, 2 commits, 13 files changed)
    • virtio-gpu support (qemu/kvm) (PR:1287, 2 commits, 4 files changed)
    • move back to openssl (PR:1312, 4 commits, 31 files changed)
    • kodi: update to 93e9d69 (PR:1443, 1 commit, 3 files changed)
    • RPi add RPi and RPi2 devices (PR:1358, 3 commits, 11 files changed)
    • RPi add Slice and Slice3 devices (PR:1357, 9 commits, 57 files changed)
    • remove all kodi project and arch specific patches (PR:1317, 7 commits, 20 files changed)
    • linux: Fix slice patch - needed rebase (PR:1444, 1 commit, 1 file changed)
    • openssl: remove $ROOT prefix (PR:1445, 1 commit, 1 file changed)
    • buildystem: Cleanup fixes (PR:1449, 2 commits, 2 files changed)
    • tools: fixup RPi gen scripts after devices (PR:1448, 1 commit, 2 files changed)
  2. XBMC:
    • [settings] revert default of epg.selectaction back to show info (PR:11848, 1 commit, 1 file changed)
    • Adding keyboard layout: Thai Kedmanee (#11844) (85d866eb)
  3. newclock5:
    • New commits in this build:
      • MMAL: Remove periodic prime calls and handle from buffer destructor (87083871)
      • MMALCodec: Include a timeout of GetPicture in default debug logging (26611de3)
  4. kernel 4.10.y:
    • New commits in this build:
      • BCM270X_DT: Add lm75 to i2c-sensor overlay (ec8d93b9)
      • bcm2835-gpio-exp: Copy/paste error adding base twice (bb0ff9d0)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
(2017-03-15, 00:03)Milhouse Wrote:
(2017-03-14, 21:27)nuwonda Wrote: Different issue since ... any build going back to v17, the display calibration is always lost/slightly deplaced (a few pixel) on bootup and more so on upgrades (a few more pixels). nothing that bothers anyone much i guess.

Ae you able to narrow down when this issue started (likely to be very tedious, I know).

Going to be tricky, not even sure i can downgrade back far enough due to db changes. Are there any logs that might help?
Reply
latest update....

while playing a movie, hit info, and the local time and end time of the movie, that's on the top right of the screen is no longer there anymore
Reply
(2017-03-15, 09:59)MidKnight Wrote: latest update....

while playing a movie, hit info, and the local time and end time of the movie, that's on the top right of the screen is no longer there anymore

Here everything seems OK.

Image
[ 2x RPi2, 2x RPi3 ]
[ LE Testbuilds for RaspberryPi (Kodi 18.0) ]
[ Marantz NR1506 ]
[ Panasonic TX-50EXW784 ]
[ NAS @ OMV 3.0.9x (Erasmus) on Banana Pi ]
[ ODROID C2 + wrxtasy's LE 8.0 ]
Reply
hrmmm. must of been a hiccup, I rebooted it and its ok now... Smile
Reply
New LibreELEC.tv Leia build #0315: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.10.2 #1 Wed Mar 15 21:03:29 GMT 2017 armv6l GNU/Linux

# vcgencmd version
Mar 13 2017 20:38:22
Copyright (c) 2012 Broadcom
version 9e38ec4b6d95d3a769dc6f8d3d78ee2f9d043850 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170315210225-#0315-g1b38cb9 [Build #0315]

# Kodi version
(18.0-ALPHA1 Git:93e9d69). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (1b38cb92, changelog) and tip of XBMC master (77f3bff1, changelog) with the following modifications: Build Highlights:
  1. libcec updates
  2. RenderManager: Force frames to output when reconfiguring renderer
Build Details:
  1. XBMC:
    • [PVR] Fix trac17374: Settings deinitialized too early on app exit. (PR:11849, 1 commit, 3 files changed)
  2. libcec:
    • added: log a warning when we detect that RPi's CEC service is used by something else, blocking libCEC. issue #191 (5469da23)
    • changed: const IAdapterCommunication::GetLogicalAddresses(), making the mutex mutable for now without changing the platform lib. closes #259 (0cf3f0fe)
    • fixed: cross compile includes (50f1179d)
    • fixed: detect debian based distros properly when installing python. closes #314 (f4e2ed77)
    • fixed: don't filter out broadcast in HandleDeviceVendorCommandWithId(). issue #309 (e1df683b)
    • fixed: send an active source message when a routing change has been received with libCEC's address as new route and no active source message has been sent yet. issue #309 #205 #233 (67d444dd)
    • fixed 67d444dd944192a31ab07637a4b57d27c890ede4 (d1a708b9)
    • fixed: vs2015 c++ redistributables (8563411d)
  3. newclock5:
    • New commits in this build:
      • RenderManager: Force frames to output when reconfiguring renderer (ccb2d792)
  4. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:1450: create_addon: add device support
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
(2017-03-15, 08:52)nuwonda Wrote: Going to be tricky, not even sure i can downgrade back far enough due to db changes. Are there any logs that might help?

Unfortunately I don't think there's anything relevant that is written to the logs.

Do you need databases to test if calibration settings are saved? Try with a clean .kodi (rename your existing .kodi folder), identify the first build with the calibration saving issue, then you can restore your old .kodi folder and return to latest builds.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
After some time i have tested the build on pi and i have found two problems.
First one is that since 0211 back button and exit does not work on some addons. For example it does not work on libreelec dev updater. I assume that this https://github.com/xbmc/xbmc/pull/11645 commit has change that behaviour.

The other one is with Confluence skin. I know it is not official one anymore but will there be an update for the problem reported here http://forum.kodi.tv/showthread.php?tid=...pid2546644

TNX
Reply
(2017-03-16, 00:20)Milhouse Wrote:
(2017-03-15, 08:52)nuwonda Wrote: Going to be tricky, not even sure i can downgrade back far enough due to db changes. Are there any logs that might help?

Unfortunately I don't think there's anything relevant that is written to the logs.

Do you need databases to test if calibration settings are saved? Try with a clean .kodi (rename your existing .kodi folder), identify the first build with the calibration saving issue, then you can restore your old .kodi folder and return to latest builds.

I may have some time for this during the weekend, i'll try a fresh install first with latest build and if the issue persists start with 17 and do boundary testing from there.
Reply
New LibreELEC.tv Leia build #0316: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.10.2 #1 Thu Mar 16 21:10:36 GMT 2017 armv6l GNU/Linux

# vcgencmd version
Mar 13 2017 20:38:22
Copyright (c) 2012 Broadcom
version 9e38ec4b6d95d3a769dc6f8d3d78ee2f9d043850 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170316210756-#0316-g1b38cb9 [Build #0316]

# Kodi version
(18.0-ALPHA1 Git:93e9d69). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (1b38cb92, changelog) and tip of XBMC master (25de4115, changelog) with the following modifications: Build Highlights:
  1. Python error (eg. plugin.video.youtube) caused by PR11814 - notified on github
Build Details:
  1. XBMC:
    • [win] use 64-bit toolset if available (PR:11845, 1 commit, 5 files changed)
    • RenderManager: Force frames to output when reconfiguring renderer (PR:11855, 1 commit, 1 file changed)
    • [bluray] Improve Blu-ray playback (PR:11836, 10 commits, 8 files changed)
    • Fix allocation of 0-length array (PR:11814, 3 commits, 2 files changed)
  2. newclock5:
    • Commits no longer in build:
      • Build add-ons with jom to speed up the windows binary add-ons builds (cf2272ff)
      • RenderManager: Force frames to output when reconfiguring renderer (ccb2d792)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
Just installed #0316 (over #0315) and Tvheadend HTSP Client, CU LRC Lyrics and Backup addons all recorded a failure to start on 1st and subsequent reboot

Kodi.log on 1st boot after installation of #0316
rPi 3, SanDisk Ultra 8Gb SD & Milhouse LE TestBuild (Kodi 18) -> Onkyo AV -> Philips 42" LCD TV
Reply
  •   
  • 1
  • 78
  • 79
  • 80(current)
  • 81
  • 82
  • 304
  •   
 
Thread Rating:
  • 12 Vote(s) - 4.67 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)4.6712