Kodi 18 - LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)

  Thread Rating:
  • 6 Vote(s) - 4.83 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post Reply
Milhouse Offline
Team-Kodi Member
Posts: 12,912
Joined: Jan 2011
Reputation: 645
Post: #1681
New LibreELEC.tv Leia build #0505: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.10.14 #1 Fri May 5 21:09:31 BST 2017 armv6l GNU/Linux

# vcgencmd version
May  4 2017 16:00:32
Copyright (c) 2012 Broadcom
version 809412fa5f5f7d88833e076d71dc329367441601 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170505210721-#0505-g2911c4a [Build #0505]

# Kodi version
(18.0-ALPHA1 Git:91a9066). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (2911c4af, changelog) and tip of XBMC master (b8ad238a, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.10.y
  • Includes latest bcm2835-driver master (284e48ac)
  • Includes latest kodi-platform master (36fb4937)
  • Includes latest libcec master (3953f8dc, ahead +12)
  • Includes latest libnfs master (4abadb79, ahead +64)
  • Includes latest p8-platform master (2d90f986)
  • Includes latest addons: inputstream.adaptive (f23ba39c), inputstream.rtmp (1052cd37, +2), peripheral.joystick (07aa1fe8, +1), pvr.argustv (8f898149, +2), pvr.demo (978f4289, +2), pvr.dvblink (b7d887c1, +2), pvr.dvbviewer (d099cfad, +2), pvr.filmon (0f1d34d4, +2), pvr.hdhomerun (ab911693, +2), pvr.hts (3911c7fe, +2), pvr.iptvsimple (f83990a4, +4), pvr.mediaportal.tvserver (367b1284, +2), pvr.mythtv (30cc7e23, +1), pvr.nextpvr (e6ece9fa, +2), pvr.njoy (296f558f, +2), pvr.octonet (2a63777b, +2), pvr.pctv (eab5f856, +2), pvr.stalker (62b7908d, +2), pvr.vbox (60017353, +2), pvr.vdr.vnsi (b7c3f3b0, +2), pvr.vuplus (78df0306, +2), pvr.wmc (27a88ca2, +2), vfs.rar (26800ebe, +1)
  • Exclude [env] ffmpeg-99.1010-tls-1.2.patch: upstream ffmpeg-3.3
  • Include [env] patch: vfs addons: add vfs.rar, vfs.sacd and vfs.sftp kodi-binary-addons
  • Include [env] patch: imagedecoder.raw: update imagedecoder.raw
  • Include [env] patch: screensaver.shadertoy: bump screensaver.shadertoy to 434f5ce
  • Include [env] patch: visualization.projectm: bump visualization.projectm to 7489e4a
  • Include [env] patch: visualization.shadertoy: bump visualization.shadertoy to ae677ac
  • Include [env] patch: visualization.spectrum: bump visualization.spectrum to d7d9c14
  • Include [env] patch: ffmpeg: update to ffmpeg-3.3
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  • Include [env] PR:1469: samba: update to samba-4.6.2
  • Include [env] PR:1582: tvheadend42: update addon
  • Include [env] PR:1597: build system: verify package downloads using sha256 checksum
  • Include [pkg] PR:2: Update b43 firmware (wlan-firmware)
  • Include [pkg] PR:24: Remove not used part (inputstream.adaptive)
  • Include [pkg] PR:62: change smbd and nmbd location (service.libreelec.settings)
  • Include [pkg] PR:65: update language from transifex (service.libreelec.settings)
  • Include [pkg] PR:72: Remove not used part (pvr.mythtv)
  • Include [pkg] PR:73: libXBMC_codec.h removed and changed to libXBMC_pvr.h (pvr.mythtv)
  • Include [pkg] PR:12034: KODI: Update NEON support
Build Highlights:
  1. New 4.10.14 kernel
  2. libnfs: Export nfs_set_timeout() and nfs_get_timeout()
Build Details:
  1. LibreELEC.tv:
    • imx6/u-boot: update to ad02f49 (PR:1592, 1 commit, 5 files changed)
    • xf86-video-nvidia: update to 375.66 (PR:1595, 1 commit, 3 files changed)
    • linux: fix options dropped when CONFIG_INITRAMFS_SOURCE is not set (PR:1594, 1 commit, 2 files changed)
    • linux: update to linux-4.10.14 (PR:1599, 6 commits, 5 files changed)
  2. libnfs:
    • libnfs: Export nfs_set_timeout() and nfs_get_timeout() (PR:196, 1 commit, 1 file changed)
    • Remove old declarations of nfs_get|set_timeout (4abadb79)
  3. newclock5:
    • New commits in this build:
      • Set the WINDOW_INVALID param in the window message (bf13a3e0)
      • CGUIControl: Include stats for interesting controls (665966d4)
  4. kernel 4.10.y:
    • Commits no longer in build:
      • serial: 8250: Don't crash when nr_uarts is 0 (88e20589)
  5. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:1597: build system: verify package downloads using sha256 checksum

Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
find quote
Milhouse Offline
Team-Kodi Member
Posts: 12,912
Joined: Jan 2011
Reputation: 645
Post: #1682
New LibreELEC.tv Leia build #0506: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.10.14 #1 Sat May 6 21:05:21 BST 2017 armv6l GNU/Linux

# vcgencmd version
May  4 2017 16:00:32
Copyright (c) 2012 Broadcom
version 809412fa5f5f7d88833e076d71dc329367441601 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170506210327-#0506-g763397e [Build #0506]

# Kodi version
(18.0-ALPHA1 Git:91a9066). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (763397eb, changelog) and tip of XBMC master (ed057680, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.10.y
  • Includes latest bcm2835-driver master (284e48ac)
  • Includes latest kodi-platform master (36fb4937)
  • Includes latest libcec master (3953f8dc, ahead +12)
  • Includes latest libnfs master (4abadb79, ahead +64)
  • Includes latest p8-platform master (2d90f986)
  • Includes latest addons: inputstream.adaptive (f23ba39c), inputstream.rtmp (1052cd37, +2), peripheral.joystick (07aa1fe8, +1), pvr.argustv (8f898149, +2), pvr.demo (978f4289, +2), pvr.dvblink (b7d887c1, +2), pvr.dvbviewer (d099cfad, +2), pvr.filmon (0f1d34d4, +2), pvr.hdhomerun (ab911693, +2), pvr.hts (3911c7fe, +2), pvr.iptvsimple (f83990a4, +4), pvr.mediaportal.tvserver (367b1284, +2), pvr.mythtv (30cc7e23, +1), pvr.nextpvr (e6ece9fa, +2), pvr.njoy (296f558f, +2), pvr.octonet (2a63777b, +2), pvr.pctv (eab5f856, +2), pvr.stalker (62b7908d, +2), pvr.vbox (60017353, +2), pvr.vdr.vnsi (b7c3f3b0, +2), pvr.vuplus (78df0306, +2), pvr.wmc (27a88ca2, +2), vfs.rar (26800ebe, +1)
  • Exclude [env] ffmpeg-99.1010-tls-1.2.patch: upstream ffmpeg-3.3
  • Include [env] patch: vfs addons: add vfs.rar, vfs.sacd and vfs.sftp kodi-binary-addons
  • Include [env] patch: imagedecoder.raw: update imagedecoder.raw
  • Include [env] patch: screensaver.shadertoy: bump screensaver.shadertoy to 434f5ce
  • Include [env] patch: visualization.projectm: bump visualization.projectm to 7489e4a
  • Include [env] patch: visualization.shadertoy: bump visualization.shadertoy to ae677ac
  • Include [env] patch: visualization.spectrum: bump visualization.spectrum to d7d9c14
  • Include [env] patch: ffmpeg: update to ffmpeg-3.3
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  • Include [env] PR:1469: samba: update to samba-4.6.2
  • Include [env] PR:1582: tvheadend42: update addon
  • Include [env] PR:1597: build system: verify package downloads using sha256 checksum
  • Include [env] PR:1601: RTL8723BS: add support for OBDA8723 - Bluetooth
  • Include [pkg] patch: Remove not used part (inputstream.adaptive)
  • Include [pkg] PR:2: Update b43 firmware (wlan-firmware)
  • Include [pkg] PR:62: change smbd and nmbd location (service.libreelec.settings)
  • Include [pkg] PR:65: update language from transifex (service.libreelec.settings)
  • Include [pkg] PR:72: Remove not used part (pvr.mythtv)
  • Include [pkg] PR:73: libXBMC_codec.h removed and changed to libXBMC_pvr.h (pvr.mythtv)
  • Include [pkg] PR:12034: KODI: Update NEON support
Build Highlights:
  1. Kodi: Estuary language updates
  2. Kodi: Settings updates
Build Details:
  1. LibreELEC.tv:
    • imx6/linux: update patches for som v1.5 from solidrun (PR:1602, 1 commit, 3 files changed)
    • imx-gpu-viv: update to galcore v5 on linux 4.4 (PR:1603, 1 commit, 1 file changed)
    • projects/imx6: init terminal with reset command in console service (PR:1600, 1 commit, 1 file changed)
  2. XBMC:
    • [cmake] copy_files_from_filelist_to_buildtree: add KEEP_DIR_STRUCTURE option (PR:12053, 1 commit, 1 file changed)
    • [settings] fix default formatting of slider settings (PR:12060, 1 commit, 1 file changed)
    • Set Param1 to WINDOW_INVALID for plugins when Init is called (PR:12050, 1 commit, 1 file changed)
    • Update README.linux testing information (PR:12006, 1 commit, 1 file changed)
    • [settings] multiple improvements (PR:12062, 4 commits, 2 files changed)
    • [settings] CGUIControlListSetting: don't disable control for multiselect settings (PR:12061, 1 commit, 1 file changed)
    • [lang][kodi.core] automatic syntax corrections for the en_GB language file (b9bed17a)
    • [lang][skin.estuary] automatic syntax corrections for the en_GB language file (0db2ef5f)
    • [lang][skin.estuary] updated language files from Transifex (c5988a43)
    • [lang][skin.estouchy] updated language files from Transifex (54fb0788)
  3. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:1601: RTL8723BS: add support for OBDA8723 - Bluetooth

Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
find quote
jwegner Offline
Junior Member
Posts: 1
Joined: May 2017
Reputation: 0
Post: #1683
I have been having issues with my TV tuner stick reporting no signal, since the media_build update in release #418

dmesg from working build #417
http://sprunge.us/QUiK

tvheadend log from build #417
http://sprunge.us/EHTg


dmesg from not working build #418
http://sprunge.us/UjEh

tvheadend log from build #418
http://sprunge.us/FbUB


Also tried the latest release + a few in between with the same results as #418
find quote
Milhouse Offline
Team-Kodi Member
Posts: 12,912
Joined: Jan 2011
Reputation: 645
Post: #1684
New LibreELEC.tv Leia build #0507: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.11.0 #1 Sun May 7 21:07:26 BST 2017 armv6l GNU/Linux

# vcgencmd version
May  4 2017 16:00:32
Copyright (c) 2012 Broadcom
version 809412fa5f5f7d88833e076d71dc329367441601 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170507210620-#0507-gbdb3738 [Build #0507]

# Kodi version
(18.0-ALPHA1 Git:91a9066). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (bdb37380, changelog) and tip of XBMC master (f160c829, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.11.y
  • Includes latest bcm2835-driver master (f924320b, ahead +1)
  • Includes latest kodi-platform master (36fb4937)
  • Includes latest libcec master (3953f8dc, ahead +12)
  • Includes latest libnfs master (4abadb79, ahead +64)
  • Includes latest p8-platform master (2d90f986)
  • Includes latest addons: inputstream.adaptive (7bde41f9, +3), inputstream.rtmp (1052cd37, +2), peripheral.joystick (07aa1fe8, +1), pvr.argustv (8f898149, +2), pvr.demo (978f4289, +2), pvr.dvblink (b7d887c1, +2), pvr.dvbviewer (d099cfad, +2), pvr.filmon (0f1d34d4, +2), pvr.hdhomerun (ab911693, +2), pvr.hts (3911c7fe, +2), pvr.iptvsimple (f83990a4, +4), pvr.mediaportal.tvserver (367b1284, +2), pvr.mythtv (30cc7e23, +1), pvr.nextpvr (e6ece9fa, +2), pvr.njoy (296f558f, +2), pvr.octonet (2a63777b, +2), pvr.pctv (eab5f856, +2), pvr.stalker (62b7908d, +2), pvr.vbox (60017353, +2), pvr.vdr.vnsi (b7c3f3b0, +2), pvr.vuplus (78df0306, +2), pvr.wmc (27a88ca2, +2), vfs.rar (26800ebe, +1)
  • Exclude [env] ffmpeg-99.1010-tls-1.2.patch: upstream ffmpeg-3.3
  • Include [env] patch: vfs addons: add vfs.rar, vfs.sacd and vfs.sftp kodi-binary-addons
  • Include [env] patch: imagedecoder.raw: update imagedecoder.raw
  • Include [env] patch: screensaver.shadertoy: bump screensaver.shadertoy to 434f5ce
  • Include [env] patch: visualization.projectm: bump visualization.projectm to 7489e4a
  • Include [env] patch: visualization.shadertoy: bump visualization.shadertoy to ae677ac
  • Include [env] patch: visualization.spectrum: bump visualization.spectrum to d7d9c14
  • Include [env] patch: ffmpeg: update to ffmpeg-3.3
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  • Include [env] PR:1441: linux: update to linux-4.11.0
  • Include [env] PR:1442: Intel HDMI/DP LPE audio config
  • Include [env] PR:1469: samba: update to samba-4.6.2
  • Include [env] PR:1597: build system: verify package downloads using sha256 checksum
  • Include [env] PR:1610: OdroidC2/RTL8192CU: no longer needed after #1513
  • Include [pkg] PR:2: Update b43 firmware (wlan-firmware)
  • Include [pkg] PR:62: change smbd and nmbd location (service.libreelec.settings)
  • Include [pkg] PR:65: update language from transifex (service.libreelec.settings)
  • Include [pkg] PR:72: Remove not used part (pvr.mythtv)
  • Include [pkg] PR:73: libXBMC_codec.h removed and changed to libXBMC_pvr.h (pvr.mythtv)
  • Include [pkg] PR:12034: KODI: Update NEON support
  • Include [pkg] PR:12067: FTPParse.cpp: use std::string
Build Highlights:
  1. New 4.11.0 kernel
Build Details:
  1. LibreELEC.tv:
    • tvheadend42: update addon (PR:1582, 2 commits, 8 files changed)
  2. XBMC:
    • Fix compilation on sh4/sparc/arc/xtensa (PR:12014, 4 commits, 4 files changed)
    • RssReader: Fix comparison between pointer and zero (PR:12033, 1 commit, 1 file changed)
  3. inputstream.adaptive:
  4. newclock5:
    • New commits in this build:
      • fixup: Change class to struct (e025cca4)
    • Commits no longer in build:
      • Set the WINDOW_INVALID param in the window message (bf13a3e0)
  5. kernel 4.11.y:
    • New commits in this build:
      • serial: 8250: Don't crash when nr_uarts is 0 (fb243008)
      • bcm2835-sdhost: Hack fix build (44cd753a)
      • config: disable MMC driver temporarily for now. (243df9c8)
      • mkknlimg: Find some more downstream-only strings (15d59e01)
      • mmc: read mmc alias from device tree (d04e675e)
      • BCM270X_DT: Add numbered aliases for SD/MMC devices (0d1ac44c)
      • config: Re-enable the bcm2835-mmc driver (89005ba9)
      • Revert "bcm2835-sdhost: Hack fix build" (8fcb1da2)
      • bcm2835-sdhost: mmc_card_blockaddr fix (8e60ecb5)
      • config: Add back MMC_BCM2835_DMA (d2ebb92a)
      • config: remove CONFIG_TOUCHSCREEN_EKTF2127 (d9f1cace)
      • staging: vc04_services: Fix bulk cache maintenance (d8479ab4)
      • SQUASH: staging: vc04_services: Fix warnings (f526a015)
      • Revert "serial: 8250: Don't crash when nr_uarts is 0" (bb460c9a)
    • Commits no longer in build:
      • cma: Add vc_cma driver to enable use of CMA (9043217d)
      • bcm2708: alsa sound driver (0decd221)
      • bcm2835: add v4l2 camera device (0de890ae)
      • scripts/dtc: Update to upstream version 1.4.1 (53e15f30)
      • config: Enable CONFIG_MEMCG, but leave it disabled (due to memory cost). Enable with cgroup_enable=memory. (20da6b30)
      • iqaudio-dac: Compile fix - untested (2267b2c2)
      • Revert "staging: vc04_services: remove vchiq_copy_from_user" (41cf6384)
      • vchiq_arm: Access the dequeue_pending flag locked (18d92f33)
      • vchiq_arm: Service callbacks must not fail (ee37f7e7)
      • vchiq_arm: Add completion records under the mutex (63bdf4cb)
      • vchiq_arm: Avoid use of mutex in add_completion (c7391dd8)
      • drm/vc4: Add a mode for using the closed firmware for display. (3abe9c01)
      • Add support for Silicon Labs Si7013/20/21 humidity/temperature sensor. (aff8ec62)
      • Document the si7020 option (edf9dcf4)
      • pisound improvements: (38340f4d)
      • Add driver_name property (f0d27f02)
      • Add driver_name paramater (eba3c286)
      • BCM270X_DT: Add pi3-disable-wifi overlay (d0600712)
      • ARM64: Fix bad cast in vc04_services (c94abd4f)
      • ARM64/SND_BCM2835: Port it to arm64. (86872951)
      • BCM270X_DT: Add spi0-cs overlay (741651c3)
      • spi-bcm2835: Disable forced software CS (8294e7f8)
      • BCM270X_DT: Enable UART0 on CM3 (c5c1d643)
      • config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR (8cb4e96e)
      • ARM64: Use dwc_otg driver by default for USB. (38141c05)
      • config: Add CONFIG_USB_DWC2 and CONFIG_USB_GADGET (80402fe5)
      • BCM270X_DT: Add reference to audio_pins to CM dtb (f7e2a9e3)
      • config: Add additional network scheduling modules (5706ad94)
      • config: Add CONFIG_TCP_CONG_BBR (72667593)
      • ASoC: A simple-card overlay for ADAU7002 (29a63df0)
      • config: Add SND_SOC_ADAU7002 codec module (e1a12884)
      • Add overlay for mcp3008 adc (#1818) (38f4d7bf)
      • gpio_mem: Remove unnecessary dev_info output (#1830) (32be7c14)
      • squash: fix order of sound/soc/bcm makefile (7f24d30c)
      • config: Enable regulator support (3733ee44)
      • BCM270x DT: expose 3.3V and 5V system rails (5716a1ba)
      • BCM270x DT: Consolidate audio card overlays (a9e12ea1)
      • config: enable Cirrus Logic Audio Card (f3be73ec)
      • dwc_otg: fix summarize urb->actual_length for isochronous transfers (b3c4c34c)
      • sound: Suppress error message about deferrals (a4b683ff)
      • BCM270X_DT: Add SMSC ethernet controller to DT (7217dd5d)
      • dmaengine: bcm2835: Fix cyclic DMA period splitting (fd1cc70c)
      • config: Add ads1015 driver to config (831301bf)
      • config: add slcan kernel module (c257760e)
      • Add overlay for ads1115 ADCs (#1864) (9151008d)
      • BCM2835-V4L2: Ensure H264 header bytes get a sensible timestamp (ffe2e3d8)
      • BCM2835-V4L2: Correctly denote key frames in encoded data (89504cd2)
      • BCM270X_DT: Add bcm2708-rpi-0-w.dts (97709373)
      • config: Add CONFIG_CRYPTO_LZ4 (9323fbbd)
      • config: Add RTL8XXXU wifi module (0ef39acf)
      • bcm2835-v4l2: Fix buffer overflow problem (d75aac2a)
      • vchiq_arm: Tweak the logging output (b5101858)
      • clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers. (9cccb9b7)
      • clk: bcm2835: Register the DSI0/DSI1 pixel clocks. (bdf4ec35)
      • clk: bcm2835: Add leaf clock measurement support, disabled by default (0df8b302)
      • drm/panel: Add support for the Raspberry Pi 7" Touchscreen. (5204a001)
      • BCM270X: Add the DSI panel to the defconfig. (0cef6f51)
      • ARM: bcm2835: dt: Add the DSI module nodes and clocks. (bf58c95b)
      • BCM270X: Enable the DSI panel node in the VC4 overlay. (5bc898ae)
      • drm/vc4: Set up SCALER_DISPCTRL at boot. (8f74d89b)
      • drm/vc4: Add support for feeding DSI encoders from the pixel valve. (5a1d4a79)
      • drm/vc4: Add DSI driver (db3e583f)
      • ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi (2d37f962)
      • ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards (1d0b104c)
      • BCM270X: Disable VEC unless vc4-kms-v3d is present. (248a7fc4)
      • drm/vc4: Name the primary and cursor planes in fkms. (e6ace8a8)
      • drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms. (9cfde9ad)
      • drm/vc4: Fix sending of page flip completion events in FKMS mode. (ff7a77a8)
      • drm/vc4: Fulfill user BO creation requests from the kernel BO cache. (26467d2b)
      • drm/vc4: Fix OOPSes from trying to cache a partially constructed BO. (2c1de2e8)
      • drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary. (e0c3545b)
      • Add ads1015 driver to config (9971eaf5)
      • drm/vc4: Don't wait for vblank when updating the cursor (9efb5092)
      • panel-raspberrypi-touchscreen: Round up clk rate to fix DSI panel. (4741bda7)
      • bcm2835-camera: Correct port_parameter_get return value (3ff619df)
      • smsc95xx: Use skb_cow_head to deal with cloned skbs (95c2e5a4)
      • brcmfmac: Ensure pointer correctly set if skb data location changes (ecc42474)
      • brcmfmac: Make skb header writable before use (3bb47a95)
      • clk: bcm2835: Limit PCM clock to OSC and PLLD_PER (2984c81f)
      • dwc_otg: Add the dependency on FIQ (91e3f0a5)
  6. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:1441: linux: update to linux-4.11.0
    • Added: [env] PR:1442: Intel HDMI/DP LPE audio config
    • Added: [env] PR:1610: OdroidC2/RTL8192CU: no longer needed after #1513
    • Added: [pkg] PR:12067: FTPParse.cpp: use std::string

Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
find quote
Aux_ Online
Senior Member
Posts: 168
Joined: May 2016
Reputation: 1
Location: Germany / BW
Post: #1685
Stop button no function since # 0506
I mean on the remote control

[ 2x RPi2, 2x RPi3 ]
[ LE Testbuilds for RaspberryPi (Kodi 18.0) ]
[ Marantz NR1506 ]
[ Panasonic TX-50EXW784 ]
[ NAS @ OMV 3.0.8x (Erasmus) on Banana Pi ]
[ ODROID C2 + wrxtasy's LE 8.0 ]
(This post was last modified: 2017-05-08 12:08 by Aux_.)
find quote
rudrood Offline
Senior Member
Posts: 141
Joined: Sep 2015
Reputation: 3
Post: #1686
(2017-05-04 18:33)Aux_ Wrote:  
(2017-05-04 16:30)Milhouse Wrote:  
(2017-05-04 16:01)Aux_ Wrote:  Small feedback to #0503:

Firstly, if I want to watch TV programs or listen to music, Spectrum addon error occurs because can not load shared library.

I've uploaded a new version of visualization.spectrum to the add-ons folder.

Note that these are just temporary add-on updates until the LE 9.0 repository can be updated with new add-ons (once the situation with latest Kodi is a bit more stable). You'll need to uninstall​ my add-on and reinstall from the repository (once it is updated) otherwise you'll never receive automatic add-on updates in future.

Thanks @Milhouse

After the installation of visualization.spectrum the picture of TV channels is okay but the sound stutter with 10Hz. Videos and MP3 seems to be in order.

EDIT:
Had done itself, something has played with System / Audio settings and the sound goes again ...

EDIT1:
It only works System / Audio / Output configuration "Fixed".
"Optimized" and "Best match" stuttered when I reboot LE

EDIT2:
The stuttering depends somehow along with commbination on GPU-Accelerated, if instead of GPU-Accelerated Medium or High chooses no longer stuttering...

EDIT3:
No! stutter also, no idea what I should still adjust
[...] Finally works, the combination:
Output configuration = fixed
Resample quality = GPU accelerated

EDIT4:
So, now no sound is there any more (my wife ....). I'll go back to previous version.

Running into the same problem.
Activating Spectrum results into image stutter and no sound in pvr tv channels (TVHeadend).
How can a visualisation for music influence pvr tv?

Thanks

Edit:
This starts with build 0503
(This post was last modified: 2017-05-08 17:16 by rudrood.)
find quote
popcornmix Offline
Team-Kodi Member
Posts: 7,869
Joined: Feb 2011
Reputation: 327
Post: #1687
(2017-05-08 17:14)rudrood Wrote:  Activating Spectrum results into image stutter and no sound in pvr tv channels (TVHeadend).
How can a visualisation for music influence pvr tv?

That is a known issue with VideoPlayer.
The fast channel switch logic means streams start playing before all the video/audio/sub tracks have been detected - the new tracks just get added as they are detected.
If it see audio packets first, playback starts with audio only and so launches visualistion.
Then the video packets are seen and visualisation is cancelled and video starts.
Normally these two events occur very close together so you don't see the visualisation start, but it can be visible.

I suspect that some change has resulted in the visualisation interfering with start of live tv playback.
Unfortunately #503 had both changes to both PVR and VideoPlayer so it's not immediately obvious which is responsible.
find quote
rudrood Offline
Senior Member
Posts: 141
Joined: Sep 2015
Reputation: 3
Post: #1688
(2017-05-08 17:55)popcornmix Wrote:  
(2017-05-08 17:14)rudrood Wrote:  Activating Spectrum results into image stutter and no sound in pvr tv channels (TVHeadend).
How can a visualisation for music influence pvr tv?

That is a known issue with VideoPlayer.
The fast channel switch logic means streams start playing before all the video/audio/sub tracks have been detected - the new tracks just get added as they are detected.
If it see audio packets first, playback starts with audio only and so launches visualistion.
Then the video packets are seen and visualisation is cancelled and video starts.
Normally these two events occur very close together so you don't see the visualisation start, but it can be visible.

I suspect that some change has resulted in the visualisation interfering with start of live tv playback.
Unfortunately #503 had both changes to both PVR and VideoPlayer so it's not immediately obvious which is responsible.

You are right.
I also run into the problem with the Estaury Mod 2 skin.
It has an option to start playback audio full screen as soon as you select a track. Since 0503 it results in playing pvr tv channels as audio. Sad

Edit:
If it's of use: problem doesn't excists on same config on general x86 builds.
(This post was last modified: 2017-05-08 19:46 by rudrood.)
find quote
popcornmix Offline
Team-Kodi Member
Posts: 7,869
Joined: Feb 2011
Reputation: 327
Post: #1689
(2017-05-08 19:42)rudrood Wrote:  It has an option to start playback audio full screen as soon as you select a track. Since 0503 it results in playing pvr tv channels as audio. Sad

If visualisation is disabled does the problem still occur?
(This post was last modified: 2017-05-08 22:35 by popcornmix.)
find quote
Milhouse Offline
Team-Kodi Member
Posts: 12,912
Joined: Jan 2011
Reputation: 645
Post: #1690
(2017-05-08 08:48)Aux_ Wrote:  Stop button no function since # 0506
I mean on the remote control

Are you sure? There's nothing obvious in #0506 (Stop button working fine here). Can you send a debug log?

Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
find quote
rudrood Offline
Senior Member
Posts: 141
Joined: Sep 2015
Reputation: 3
Post: #1691
(2017-05-08 20:07)popcornmix Wrote:  
(2017-05-08 19:42)rudrood Wrote:  It has an option to start playback audio full screen as soon as you select a track. Since 0503 it results in playing pvr tv channels as audio. Sad

If visualisation is disabled does the problem still occur?

With the Estaury mod skin the skipping and no sound problem stops, but when selecting a tv channel for the first time it shows oke but selecting the next it "displays" as audio and doesn't show the video.
When I press TAB afterwards both audio and video show.
find quote
Milhouse Offline
Team-Kodi Member
Posts: 12,912
Joined: Jan 2011
Reputation: 645
Post: #1692
New LibreELEC.tv Leia build #0508: RPi / RPi2
(Supercedes previous build)

Code:
# uname -a
Linux rpi512 4.11.0 #1 Mon May 8 21:04:44 BST 2017 armv6l GNU/Linux

# vcgencmd version
May  4 2017 16:00:32
Copyright (c) 2012 Broadcom
version 809412fa5f5f7d88833e076d71dc329367441601 (clean) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170508210341-#0508-gbdb3738 [Build #0508]

# Kodi version
(18.0-ALPHA1 Git:91a9066). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (bdb37380, changelog) and tip of XBMC master (61e98fd3, changelog) with the following modifications:
  • Includes newclock5 patches
  • Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.11.y
  • Includes latest bcm2835-driver master (f924320b, ahead +1)
  • Includes latest kodi-platform master (36fb4937)
  • Includes latest libcec master (3953f8dc, ahead +12)
  • Includes latest libnfs master (4abadb79, ahead +64)
  • Includes latest p8-platform master (2d90f986)
  • Includes latest addons: inputstream.adaptive (7bde41f9, +3), inputstream.rtmp (1052cd37, +2), peripheral.joystick (07aa1fe8, +1), pvr.argustv (8f898149, +2), pvr.demo (978f4289, +2), pvr.dvblink (b7d887c1, +2), pvr.dvbviewer (d099cfad, +2), pvr.filmon (0f1d34d4, +2), pvr.hdhomerun (ab911693, +2), pvr.hts (3911c7fe, +2), pvr.iptvsimple (f83990a4, +4), pvr.mediaportal.tvserver (367b1284, +2), pvr.mythtv (9aeb5e9d, +3), pvr.nextpvr (e6ece9fa, +2), pvr.njoy (296f558f, +2), pvr.octonet (2a63777b, +2), pvr.pctv (eab5f856, +2), pvr.stalker (62b7908d, +2), pvr.vbox (60017353, +2), pvr.vdr.vnsi (b7c3f3b0, +2), pvr.vuplus (78df0306, +2), pvr.wmc (27a88ca2, +2), vfs.rar (26800ebe, +1)
  • Exclude [env] ffmpeg-99.1010-tls-1.2.patch: upstream ffmpeg-3.3
  • Include [env] patch: vfs addons: add vfs.rar, vfs.sacd and vfs.sftp kodi-binary-addons
  • Include [env] patch: imagedecoder.raw: update imagedecoder.raw
  • Include [env] patch: screensaver.shadertoy: bump screensaver.shadertoy to 434f5ce
  • Include [env] patch: visualization.projectm: bump visualization.projectm to 7489e4a
  • Include [env] patch: visualization.shadertoy: bump visualization.shadertoy to ae677ac
  • Include [env] patch: visualization.spectrum: bump visualization.spectrum to d7d9c14
  • Include [env] patch: ffmpeg: update to ffmpeg-3.3
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  • Include [env] PR:1441: linux: update to linux-4.11.0
  • Include [env] PR:1442: Intel HDMI/DP LPE audio config
  • Include [env] PR:1469: samba: update to samba-4.6.2
  • Include [env] PR:1597: build system: verify package downloads using sha256 checksum
  • Include [env] PR:1610: OdroidC2/RTL8192CU: no longer needed after #1513
  • Include [env] PR:1612: Package updates: various minor bumps
  • Include [env] PR:1613: wlan-firmware: update to wlan-firmware-cf02ad3
  • Include [pkg] PR:62: change smbd and nmbd location (service.libreelec.settings)
  • Include [pkg] PR:65: update language from transifex (service.libreelec.settings)
  • Include [pkg] PR:12034: KODI: Update NEON support
Build Highlights:
  1. Large number of package updates - some add-ons might be broken, shout and I'll push what I can
Build Details:
  1. XBMC:
    • FTPParse.cpp: use std::string (PR:12067, 1 commit, 1 file changed)
    • [cmake] copy_files_from_filelist_to_buildtree: fix 1afb6dcbd8 (PR:12068, 1 commit, 1 file changed)
    • [cmake] AddonHelpers: fix install directory exclude syntax (PR:12070, 1 commit, 1 file changed)
  2. pvr.mythtv:
    • Remove not used part (PR:72, 1 commit, 1 file changed)
    • libXBMC_codec.h removed and changed to libXBMC_pvr.h (PR:73, 1 commit, 4 files changed)
  3. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:1612: Package updates: various minor bumps
    • Added: [env] PR:1613: wlan-firmware: update to wlan-firmware-cf02ad3

Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
find quote
rudrood Offline
Senior Member
Posts: 141
Joined: Sep 2015
Reputation: 3
Post: #1693
(2017-05-08 22:43)rudrood Wrote:  
(2017-05-08 20:07)popcornmix Wrote:  
(2017-05-08 19:42)rudrood Wrote:  It has an option to start playback audio full screen as soon as you select a track. Since 0503 it results in playing pvr tv channels as audio. Sad

If visualisation is disabled does the problem still occur?

With the Estaury mod skin the skipping and no sound problem stops, but when selecting a tv channel for the first time it shows oke but selecting the next it "displays" as audio and doesn't show the video.
When I press TAB afterwards both audio and video show.

Attached a youtube movie:
Starts with visualisation option on and skin option "play audio fullscreen". It should have sound at start.
Then I zap to next channel, skin sees it as audio. Pressing tab gives audio and video.
Then I disable the visualisation. Stop playing and start again.
Video and audio is oke, but next zap makes the skin still see it as audio.
Then I disable the option in the skin, stop the tv and start it again. Everything oke.

https://youtu.be/xMVHKXov6mw

Downgrade to 0502 fixes both.
(This post was last modified: 2017-05-08 23:12 by rudrood.)
find quote
masterbi Offline
Junior Member
Posts: 5
Joined: Jun 2015
Reputation: 0
Post: #1694
Since #0419 all updates I tried broke the retroplayer support. The emulators do not start anymore. I use the IARL addon to launch thé games. Then I AM asked to chose between thé available emulators installed. On récent versions it is not doing that anymore. Just nothing happens. Downgrading to #0419 always seems to fix the Problem.
find quote
Aux_ Online
Senior Member
Posts: 168
Joined: May 2016
Reputation: 1
Location: Germany / BW
Post: #1695
(2017-05-08 22:13)Milhouse Wrote:  
(2017-05-08 08:48)Aux_ Wrote:  Stop button no function since # 0506
I mean on the remote control

Are you sure? There's nothing obvious in #0506 (Stop button working fine here). Can you send a debug log?
Rectification:
In #0506 works correctly
In #0507 does not work
In #0508 also works correctly

I think there will be no more log needed...

[ 2x RPi2, 2x RPi3 ]
[ LE Testbuilds for RaspberryPi (Kodi 18.0) ]
[ Marantz NR1506 ]
[ Panasonic TX-50EXW784 ]
[ NAS @ OMV 3.0.8x (Erasmus) on Banana Pi ]
[ ODROID C2 + wrxtasy's LE 8.0 ]
find quote
Post Reply