[Vimes]

Just updated to the latest build 521 but, although I joined late to these builds, I have noted with the Official LibreELEC 8.0.1 the Pi3 when powered on switches on the TV and the TV goes to the HDMI input for the Pi3. When the Pi3 is powered off the TV goes into standby. This has always worked this way with no issues.

However with these builds when the Pi3 is powered on (Panasonic TV still in standby as typical) the TV powers on but goes to a DVB channel and not the HDMI input of the Pi3. So I manually switch the TV over and all is well. When the Pi3 is powered off the TV will go into standby.

Ths repeats.

Regardless of the CEC settings for the Pi3 the TV will only power itself on to a DVB channel and not a HDMI input that the Pi3 is on but only when using these tests builds.

Go back to the LibreELEC 8.0.1 and the TV will power on to the HDMI 1 channel of the PI3. If I move the Pi3 to any of the four HDMI inputs the TV will follow, but only with the 8.0,1 release.

The cable is not the issue as it works great with the 8.0.1 release but changing it makes no difference.

Not a big issue but just curious how the TV detects the HDMI input to power on but not switch to that input on these builds.

Just to add on the Official LibreELEC 8.01 the libCEC is version 4.0.2 and on these builds it is 4.0.1. Not sure if that makes a difference.
Both are set to switch the source to this device on startup, but only the 8.0.1 version will do that.