[UsefulG]

Just to confirm that with build 0703 both Netflix and Amazon VoD from Sandmann79 work perfectly. Just a quick heads up the inputstream addon defaults to 480p for protected content which caused stuttering on a 1080/24p video from Amazon, once changed to 720p all was right again.

[popcornmix]

perhaps it's a netflix plugin issue or just teething problems.

We've still not seen the debug log (wiki).
Make sure you have inputstream.adaptive set to 720p (it is decoded in software so 1080p won't work).
720p is good on a Pi3 - I'm not sure if Pi2 can handle it (Pi1 certainly won't).

[Milhouse]

I used ..

I really don't know why you're doing any of that, and what you've done is wrong, so for anyone else that wants a widevine fresh start just remove the entire /storage/.kodi/cdm folder and use the curl command exactly as posted in note #6 of the first post. It's best not to make stuff up.

[heinzgruber]

Make sure you have inputstream.adaptive set to 720p (it is decoded in software so 1080p won't work).
720p is good on a Pi3 - I'm not sure if Pi2 can handle it (Pi1 certainly won't).

so there is no chance to get 1080p working on Pi3?

[deuteragenie]

Just to confirm that with build 0703 both Netflix and Amazon VoD from Sandmann79 work perfectly. Just a quick heads up the inputstream addon defaults to 480p for protected content which caused stuttering on a 1080/24p video from Amazon, once changed to 720p all was right again.

I can also confirm that Amazon VOD and Netflix both work with build 703

[popcornmix]

so there is no chance to get 1080p working on Pi3?

That is out of our hands really.
libwidevine contains a software decoder (as well as decryption) and is closed source so isn't something we can optimise.
It doesn't appear to use multiple cores as well as ffmpeg (normally two cores seem relatively idle).

Overclocking may help, but I don't expect you will get far enough for 1080p software decode.

[heinzgruber]

so there is no chance to get 1080p working on Pi3?

That is out of our hands really.
libwidevine contains a software decoder (as well as decryption) and is closed source so isn't something we can optimise.
It doesn't appear to use multiple cores as well as ffmpeg (normally two cores seem relatively idle).

Overclocking may help, but I don't expect you will get far enough for 1080p software decode.

okay. thanks. 'm already at 1350 MHz and it still stutter.

[Potze]

after updating from #0620 to #0629 the movies in rar-packs can't be played.
It only shows the .rar-file and when it opens only the sound starts.

That's because the rar package has been removed since it caused boot loops (see release description)

Will it be available in one furter releases?

[SharpCoder]

perhaps it's a netflix plugin issue or just teething problems.

We've still not seen the debug log (wiki).
Make sure you have inputstream.adaptive set to 720p (it is decoded in software so 1080p won't work).
720p is good on a Pi3 - I'm not sure if Pi2 can handle it (Pi1 certainly won't).

I was under the impression 720p was the default value? as i haven't changed it.

as for the log, i just didn't get around to it but it's not needed now, it's on rpi3, i'll re-visit the netflix plugin in the future, as of now it's just not functioning to the degree that would make me abandon it from the browser or app version.

Thanks for the help regardless!

I used ..

I really don't know why you're doing any of that, and what you've done is wrong, so for anyone else that wants a widevine fresh start just remove the entire /storage/.kodi/cdm folder and use the curl command exactly as posted in note #6 of the first post. It's best not to make stuff up.

well i had done it before reading the first post, but naturally both do the same thing as there is only 2 files present, i doubt made up scripts function very well.

beyond that, i tried both ways and result was the same.

[Milhouse]

after updating from #0620 to #0629 the movies in rar-packs can't be played.
It only shows the .rar-file and when it opens only the sound starts.

That's because the rar package has been removed since it caused boot loops (see release description)

Will it be available in one furter releases?

It will be available from the LibreELEC 9.0 Repository which will be updated once the addon API stops changing every week (this assumes vfs.rar is updated to work with Kodi 18, as it doesn't compile right now, which is the main reason for dropping it).

If you must have RAR support my advice would be to go back to Kodi 17 (or continue using the last Kodi 18 build that included vfs.rar).

It's a similar story with inputstream.rtmp, which also doesn't build right now (same addon author, maybe he's on holiday). I may reintroduce this addon if/when it is updated but if you need it then use the last Kodi 18 build with inputstream.rtmp, or go back to Kodi 17.

[Cosmicbase]

Hello,

i`am really very happy for the build #0703. And now Amazon Prime is working. GOOD JOB

Iàm testing the `Amazon Prime Instant Video from XLordKX and it works perfectly but the Amazon65 from Sandman no work.

I have always a error. i dont now which settings are right at amazon65.

is there a speciell script path or browser path

here is the log http://sprunge.us/BMRa

Thanks

[herrmeier01]

Here also... Netflix is working well. Great job! Thanks a lot.

[Milhouse]

Iàm testing the `Amazon Prime Instant Video from XLordKX and it works perfectly but the Amazon65 from Sandman no work.

I have always a error. i dont now which settings are right at amazon65.

is there a speciell script path or browser path

here is the log http://sprunge.us/BMRa

Thanks

Code:

22:09:59.133 T:1268413344 WARNING: CAddonSettings[plugin.video.amazon65]: cannot reference separator setting in old setting condition "eq(-2,0)" for "browser"
22:09:59.133 T:1268413344 WARNING: CAddonSettings[plugin.video.amazon65]: failed to parse visible condition "eq(-2,0)" of old setting definition for "browser"
22:09:59.133 T:1268413344 WARNING: CAddonSettings[plugin.video.amazon65]: cannot reference separator setting in old setting condition "eq(-3,0)" for "cust_path"
22:09:59.133 T:1268413344 WARNING: CAddonSettings[plugin.video.amazon65]: failed to parse visible condition "eq(-3,0)" of old setting definition for "cust_path"

It doesn't look like the Amazon65 addon is compatible with the Settings Library changes - you'll need to contact the addon author.

[Milhouse]

New LibreELEC.tv Leia build #0704: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.11.8 #1 Tue Jul 4 21:19:06 BST 2017 armv6l GNU/Linux

# vcgencmd version
Jul  3 2017 14:20:31
Copyright (c) 2012 Broadcom
version 4139c62f14cafdb7d918a3eaa0dbd68cf434e0d8 (tainted) (release)

# lsb_release
LibreELEC (Milhouse) - Version: devel-20170704211803-#0704-g0ab0d73 [Build #0704]

# Kodi version
(18.0-ALPHA1 Git:423072a). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (0ab0d738, changelog) and tip of XBMC master (5db8e092, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.11.y
  
• Includes latest bcm2835-driver master (5f543952, ahead +2)
  
• Includes latest kodi-platform master (36fb4937)
  
• Includes latest libcec master (3953f8dc, ahead +12)
  
• Includes latest libnfs master (abf2f7fc, ahead +35)
  
• Includes latest p8-platform master (2d90f986)
  
• Includes latest addons: inputstream.adaptive (888effe1, +4), inputstream.rtmp (6db3697a), peripheral.joystick (3ae0aee3, +3), pvr.argustv (b281e04f), pvr.demo (ffee02b8), pvr.dvblink (6d42eae1), pvr.dvbviewer (a5db9ddb), pvr.filmon (300c595e), pvr.hdhomerun (9073b99b), pvr.hts (2651886f), pvr.iptvsimple (dbf6011e), pvr.mediaportal.tvserver (07d73f3a), pvr.mythtv (6e88cbb3, +7), pvr.nextpvr (239dbef3), pvr.njoy (4785afd2), pvr.octonet (9bbd7cf3), pvr.pctv (f61e2541), pvr.stalker (151e3d3f), pvr.vbox (df9efea4), pvr.vdr.vnsi (7d6b52ed, +8), pvr.vuplus (83a729ea), pvr.wmc (93cebfc7)
  
• Include [env] compare: kodi18a1 latest updates
  
• Include [env] patch: inputstream.rtmp: disable outdated addons that no longer build
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] PR:1469: samba: update to samba-4.6.4
  
• Include [env] PR:1726: [WIP] lirc: update to 0.10.0
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  
• Include [pkg] PR:67: Revert "Revert "change smbd and nmbd location"" (service.libreelec.settings)
  
• Include [pkg] PR:352: Fix: set wrong variable (libcec)
  
• Include [pkg] PR:12110: smbclient: cleanup smbclient configuration
  
• Include [pkg] PR:12311: FIX: ensure real filename from videodb in playlists
  

Build Highlights:

1. Reinstate updated SIGTERM handler
   
2. newclock5: VideoPlayer updates
   

Build Details:

1. LibreELEC.tv:
   • linux: fix post_patch which may end with exit code == 1 if no overlay (PR:1741, 1 commit, 1 file changed)
     
2. XBMC:
   • remove unnecessary warning (PR:12414, 1 commit, 1 file changed)
     
   • Added documentation of cmake arch configuration (PR:12418, 1 commit, 1 file changed)
     
   • [ios11] - fix native keyboard (PR:12420, 2 commits, 5 files changed)
     
   • [lang][kodi.core] automatic syntax corrections for the en_GB language file (117bee30)
     
   • [lang][skin.estuary] updated language files from Transifex (42d999fa)
     
   • [lang][skin.estouchy] updated language files from Transifex (196e589c)
     
   • Added installer generation info for new x64 windows builds (232bf2aa)
     
3. inputstream.adaptive:
   • Parse defaultKID from TENC/PIFF if not in psshset (68ede624)
     
   • Merge branch 'master' of https://github.com/peak3d/inputstream.adaptive (888effe1)
     
4. newclock5:
   • New commits in this build:
     • VideoPlayer: register ProcessInfo (edbe800b)
       
     • Android MediaCodec:: VideoBuffer implementation (5347fd83)
       
     • AudioDecoderHW Registration / DVDCodecAudioAndroidMediaCodec (117a4e6a)
       
     • Fix FactoryCodec::Audio / MediaCodecOES (61d11891)
       
     • Register LinuxRenderGLES / Fix MediaCodec Non-Surface (1055b82d)
       
     • VideoPlayer: ios - adapt to changes (db93850b)
       
     • RBP: Register ProcessInfo (944aefdf)
       
     • PixelConverterRBP: Fix width/height typo (34f5f990)
       
     • ProcessInfo: Fix compiler warning (36da604b)
       
     • AddonVideoCodec: Switch to using CVideoBufferManager (86801ce9)
       
   • Commits no longer in build:
     • compile fixes (b0f12a3f)
       
     • AddonVideoCodec: Hack in MMAL support (57fad0cd)
       
     • AddonVideoCodec: Remove buffer size hack (1a6b505c)
       
5. kernel 4.11.y:
   • New commits in this build:
     • ASoC: bcm2835: Add support for TDM modes (a49f6e08)
       
     • ASoC: bcm2835: Support left/right justified and DSP modes (b4e11f2e)
       
     • ASoC: bcm2835: Support additional samplerates up to 384kHz (ba1d24ae)
       
     • ASoC: bcm2835: Enforce full symmetry (10b8e723)
       

[Milhouse]

Weekly Linux 4.12.0 build #0704x: RPi / RPi2

This is based on the released 4.12.0 kernel. Unfortunately we have an issue building Generic with 4.12.y (lack of suitable nvidia-legacy driver) which is delaying the cut over from 4.11.y to 4.12.y.