[HiassofT]

After reboot unplugged: After pulling off the power plug the first reboot had worked normally but at the second reboot raspberry has stayed again.

lsusb | paste -> http://sprunge.us/UgFL
dmesg | paste -> http://sprunge.us/FMEN
journalctl -a | paste -> http://sprunge.us/abDD

With the older builds I had tried until May I believe to # 0516 and the problem was always there.
Could perhaps someone else test whether the issue is there?

Thanks for the logs!

In the unplugged case the S960 kernel driver crashes when trying to attach the dvb tuner/demodulator driver:

Code:

[   10.824322] usb 1-1.4: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[   10.828840] Unhandled prefetch abort: unknown 1 (0x001) at 0x00000002
[   10.828864] Internal error: : 1 [#1] SMP ARM
[   10.828894] Modules linked in: brcmfmac dvb_usb_dvbsky(+) m88ds3103 brcmutil dvb_usb_v2 cfg80211 rc_core i2c_mux dvb_core bcm2835_gpiomem rfkill fixed
[   10.828944] CPU: 3 PID: 292 Comm: systemd-udevd Not tainted 4.12.7 #1
[   10.828952] Hardware name: BCM2835
[   10.828961] task: aa944600 task.stack: aa09e000
[   10.828971] PC is at 0x2
[   10.828987] LR is at m88ds3103_attach+0x104/0x12c [m88ds3103]

This crash is quite certainly the reason why your kernel won't shut down cleanly, could well be that something is stuck in the background or the kernel then is in an illegal state.

You can try to contact the DVB driver author, maybe he can fix that bug (the kernel shouldn't crash but simply print an error if something unexpected happens).

so long,

Hias

[Aux_]

Thanks @HiassofT


But unfortunately the issue is also available in the official build 8.0.2, have just been tested - but - If you wait 2min the raspberry finally reboots
That is why it is not so critical.

A question - should not the watchdog start in such a case?

[HiassofT]

@Aux_

on a second thought it's more probable that the issue is caused by the device drawing too much power - this is a very common issue on RPi.

Check the output of

Code:

vcgencmd get_throttled

after booting up with the power disconnected, if you get anything else than "0x0" quite certainly your RPi power supply isn't adequate for that.

Other than that: after a kernel crash everything can happen, even all your HDD data being trashed. Better don't expect the system to run normally after that.

so long,

Hias

[Aux_]

@Aux_

on a second thought it's more probable that the issue is caused by the device drawing too much power - this is a very common issue on RPi.

Check the output of

Code:

vcgencmd get_throttled

after booting up with the power disconnected, if you get anything else than "0x0" quite certainly your RPi power supply isn't adequate for that.

Other than that: after a kernel crash everything can happen, even all your HDD data being trashed. Better don't expect the system to run normally after that.

so long,

Hias

I have looked

Code:

vcgencmd get_throttled

the result was 0x0

Nevertheless, another power supply tested, unfortunately also negative result.
So I think it can not be at the power supply.

[HiassofT]

You could also try connecting the S960 to a powered USB hub instead of directly to the RPi to rule out RPi power issues.

I couldn't find a manual for the box so I'm not sure if using the box without the power supply is supported at all. If the manual says this works and it's not an issue with the RPi power supply contact the manufacturer / driver author.

so long,

Hias

[Aux_]

You could also try connecting the S960 to a powered USB hub instead of directly to the RPi to rule out RPi power issues.

I couldn't find a manual for the box so I'm not sure if using the box without the power supply is supported at all. If the manual says this works and it's not an issue with the RPi power supply contact the manufacturer / driver author.

so long,

Hias

This is not really a problem when you know what it is.
Easier said if you do not use the S960 you have to pull out both USB and power plug then there is no problem

[Milhouse]

New LibreELEC.tv Leia build #0819: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.12.7 #1 Sat Aug 19 21:05:31 BST 2017 armv6l GNU/Linux

# vcgencmd version
Aug  8 2017 12:05:45
Copyright (c) 2012 Broadcom
version 196063438d7bb0769861c86f948ae653727adb7e (clean) (release)

# lsb_release
LibreELEC (Milhouse): devel-20170819210414-#0819-g32406a7 [Build #0819]

# Kodi version
(18.0-ALPHA1 Git:0f9abae). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (32406a74, changelog) and tip of XBMC master (0f9abae6, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the LibreELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.12.y
  
• Includes latest bcm2835-driver master (b9a8e6a5, ahead +4)
  
• Includes latest kodi-platform master (36fb4937)
  
• Includes latest libcec master (8adc786b, ahead +26)
  
• Includes latest libnfs master (df94ae93, ahead +56)
  
• Includes latest p8-platform master (a822e196)
  
• Includes latest addons: inputstream.adaptive (0c7e9754, +42), inputstream.rtmp (e094fa38, +1), peripheral.joystick (cc14287c, +3), pvr.argustv (310737e2), pvr.demo (f07d898c, +1), pvr.dvblink (0b66c640, +4), pvr.dvbviewer (a1e4bb0c, +5), pvr.filmon (1c9d2ebe), pvr.hdhomerun (b89c2be4, +9), pvr.hts (a1de6329, +1), pvr.iptvsimple (260434e4, +5), pvr.mediaportal.tvserver (d7a9acdb), pvr.mythtv (a17a3a4f, +1), pvr.nextpvr (03a3b714), pvr.njoy (79e8e653), pvr.octonet (a77cf111), pvr.pctv (00b76689), pvr.stalker (df492d27, +1), pvr.vbox (44f3d04e), pvr.vdr.vnsi (07172ed0, +1), pvr.vuplus (921b14f6, +5), pvr.wmc (1d655540)
  
• Include [env] compare: linux: update to linux-4.12.7
  
• Include [env] patch: libcec: don't link non-existant libtinfo
  
• Include [env] patch: nss/nspr: include in main image [rfc][gcc7]
  
• Include [env] patch: rev hack for kodi
  
• Include [env] patch: tvheadend42: fixup ffmpeg patch
  
• Include [env] patch: switch back to standard ncurses
  
• Include [env] patch: buildsystem: update to gcc (to 7.2), glibc and binutils
  
• Include [env] patch: Add experimental splash video for RPi
  
• Include [env] patch: Bump included addon versions to prevent online updates
  
• Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  
• Include [env] patch: pvr addons: disable broken addons
  
• Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, other)
  
• Include [env] PR:1773: init: make break after behaviour really break after
  
• Include [env] PR:1776: Don't cause system to hang on halt/reboot when net-booting
  
• Include [env] PR:1821: use 7zip for addon.zip creation
  
• Include [env] PR:1835: add support for optional kernel modules in image and from addons
  
• Include [env] PR:1862: busybox: revert dd fsync change which makes no sense
  
• Include [env] PR:1896: config/functions: fix bash-4.4 issue, and empty 2nd param behaviour
  
• Include [pkg] patch: Pre-release RPi0W/RPi3 Bluetooth firmware (details) (brcmfmac_sdio-firmware-rpi)
  
• Include [pkg] patch: Pre-release RPi0W/RPi3 WiFi firmware (details) (kernel-firmware)
  
• Include [pkg] patch: Pre-release RPi0W/RPi3 WiFi firmware (details) (wlan-firmware)
  
• Include [pkg] patch: skin.estuary: reduce system info font size (kodi)
  
• Include [pkg] PR:12311: FIX: ensure real filename from videodb in playlists
  

Build Highlights:

1. switch back to standard ncurses
   

Build Details:

1. XBMC:
   • [Fix] Add .m4v to music tag loader factory as valid extension (PR:12682, 1 commit, 2 files changed)
     
   • Add system/lcms2.dll to .gitignore (PR:12694, 1 commit, 1 file changed)
     
   • [wayland] Fix compilation with older gcc (PR:12693, 1 commit, 1 file changed)
     
   • Integrate Wayland build into buildsteps (PR:12691, 1 commit, 10 files changed)
     
2. inputstream.adaptive:
   • reduce #psshsets by using use_count (0c7e9754)
     
3. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [env] patch: switch back to standard ncurses
     
   • Added: [env] patch: libcec: don't link non-existant libtinfo
     

[bmonster]

Hi,

Are all the PVR addons back in the nightly builds yet.

Regards Bucky

[Milhouse]

Hi,

Are all the PVR addons back in the nightly builds yet.

Regards Bucky

No. The following are not included (as they don't currently build):

Code:

pvr.argustv
pvr.filmon
pvr.mediaportal.tvserver
pvr.nextpvr
pvr.njoy
pvr.pctv
pvr.stalker
pvr.vbox
pvr.wmc

It's up to the add-on maintainers to update their add-on. Obviously if they don't they'll be dropped from the Leia repo at some point. If your favourite PVR add-on is in the above list then you should open an issue on the appropriate github (check first that there isn't already an open issue).

[Aux_]

Build Highlights:

[*]switch back to standard ncurses

Can it be that PVR channels switch much faster now? The stop button also reacts faster, before always had a dark screen a few seconds.

[AndiMandi]

Hey there,

since I installed the latest Release, i´m not longer able to connect to my Kodi via SSH and Putty.
If i try to open a connection, Putty always told me "Connection refused"
libreelec is installed on a RPi3 and SSH-Service on the RPi is running.
I´ve tried to switch the SSH-Service off and on again many times. But nothing helps.
Can you help me out?

Greetz,
AndiMandi

[Aux_]

Hey there,

since I installed the latest Release, i´m not longer able to connect to my Kodi via SSH and Putty.
If i try to open a connection, Putty always told me "Connection refused"
libreelec is installed on a RPi3 and SSH-Service on the RPi is running.
I´ve tried to switch the SSH-Service off and on again many times. But nothing helps.
Can you help me out?

Greetz,
AndiMandi

In my case, the first connection with FileZilla had not worked but the second connection worked. It took some time.

[AndiMandi]

Nop nothing works. Also Filezilla tells me a "Connection refused". Looks like thers some kind of "Firewall" who blocks my connection.
This is what Filezille sais:

Status: Connecting to libreelec...
Response: fzSftp started, protocol_version=8
Command: open "root@libreelec" 22
Error: Network error: Connection refused
Error: Could not connect to server

Is there any point in the Settings of Kodi, where I should have a look?

[Aux_]

Is there any point in the Settings of Kodi, where I should have a look?

If you do not log in with ssh public key, then only thing that must be noted is
Settings -> LibreELEC -> Services -> Disable SSH Password (OFF) - must OFF otherwise you can not enter.

[Milhouse]

Hey there,

since I installed the latest Release, i´m not longer able to connect to my Kodi via SSH and Putty.

Can you confirm you don't have this problem with #0818? I've no problem with Putty and SSH but then I don't use passwords (public key only), will test a password later.