2018-10-18, 19:35
(2018-10-18, 15:54)KrX3D Wrote: is there any way to get it working?
Please start a thread on the LibreELEC Forum.
Please start a thread on the LibreELEC Forum.
2018-10-18, 20:55
Hi Milhouse,
I have a very curious behavior with my libreelec installation. I'm not able to say since which version this is existing but its very old (in LE9 test builds!)
In the actual stable version this problem does not exist. and the behavior is a little bit better since the beginning of the LE9 Test builds.
Environment:
But after this 10-15seconds i will get no feedback from kodi. It looks like it its frozen. Nothing is working.
After another 10-15 seconds Libreelec/Kodi will "play" all pressed keys in roundabout one second very fast.
Then all is working well.
I have the same problems when i see a movie/liveTV and press the back button to enter the menue and will check something... after about 10-15 seconds no keypress will working and then all together. Here also the move/liveTV will stop for about 10 seconds.
I have this problem in all setups with the test builds, also on a clean installation!
Here is the log: http://ix.io/1puB
(with logging enabled in advancedsettings.xml / i inserted the empty lines (press enter) at the time when the problem occur)
As I can see nothing crashed and I have no high networktraffic in this time.
I hove you can help me?!
Thanks a lot
Frank
I have a very curious behavior with my libreelec installation. I'm not able to say since which version this is existing but its very old (in LE9 test builds!)
In the actual stable version this problem does not exist. and the behavior is a little bit better since the beginning of the LE9 Test builds.
Environment:
- Latest Rasperry Pi 3b+
- LE9 Testbuilds with full network booting (no SD card)
- OS storage mounted via NFS / Movies via SMB
- Networking via 100MBit
But after this 10-15seconds i will get no feedback from kodi. It looks like it its frozen. Nothing is working.
After another 10-15 seconds Libreelec/Kodi will "play" all pressed keys in roundabout one second very fast.
Then all is working well.
I have the same problems when i see a movie/liveTV and press the back button to enter the menue and will check something... after about 10-15 seconds no keypress will working and then all together. Here also the move/liveTV will stop for about 10 seconds.
I have this problem in all setups with the test builds, also on a clean installation!
Here is the log: http://ix.io/1puB
(with logging enabled in advancedsettings.xml / i inserted the empty lines (press enter) at the time when the problem occur)
As I can see nothing crashed and I have no high networktraffic in this time.
I hove you can help me?!
Thanks a lot
Frank
2018-10-18, 21:30
(2018-10-18, 20:55)frank74 Wrote: I hove you can help me?!
My initial thought is that your network connection is the bottleneck - for instance Kodi will be querying a SQLite database which is being read across the network and then processed on the RPi. The same for the OS. Try switching to MySQL for your media library, see if that helps. Since you're using an RPi3+, connect at 1Gbps (you won't get that, but it will be about 3.5x faster than 100Mbps).
You could run
bcmstat.sh xd1 on the RPi3_ to monitor the amount of network traffic being sent/received, and if %iowt (iowait) is an issue - large periods of high iowait will mean the CPU is IO (network) bound.
2018-10-18, 22:13
Hi Milhouse,
thanks for your fast respone:
I already using mySQL a Database but you are right with iowt:
(sorry, I don't know hot to pastebin with console output
)
but it's intresting i made another test:
Start liveTV but i does not wait a longer time... only about 1min and i does not stop i only go through the menues ans liveTV in the background....
The same output from your tool... but all works well. It's only after about 10min?!
My remote filesystem is via nfs from a (virtual) debian stretch server unning on a SSD and i have a fast respone from my server for filesystem operations... my movies are on normal hdd's and I'm able to copy with 100 Megabyte/s to My Workstation connected via 1G
About the network connection.. I will test it next weekend... because i split my connection in 2x 100M because i have only one Cat6 cable and my TV also needs network
And there is no Probelm with the latest stable Libreelec!
Thanks
Frank
thanks for your fast respone:
I already using mySQL a Database but you are right with iowt:
(sorry, I don't know hot to pastebin with console output
)Code:
Time ARM Core H264 Core Temp (Max) IRQ/s RX B/s TX B/s %user %nice %sys %idle %iowt %irq %s/irq %total Memory Free/Used
======== ======= ======= ======= =============== ====== ========== ========== ====== ====== ====== ====== ====== ====== ====== ====== ================
21:57:07 1200Mhz 400Mhz 300Mhz 60.15C (60.15C) 2,193 187,785 20,538 0.00 7.69 15.39 69.24 0.00 0.00 0.00 30.76 546,716 kB/28.6%
21:57:08 600Mhz 250Mhz 250Mhz 59.07C (60.15C) 2,326 337,013 8,976 2.35 0.71 2.82 90.15 0.00 0.00 0.24 9.85 546,676 kB/28.6%
21:57:09 600Mhz 250Mhz 250Mhz 59.07C (60.15C) 2,330 318,035 9,590 1.41 0.71 2.36 90.77 0.00 0.00 0.00 9.23 546,348 kB/28.7%
21:57:10 1400Mhz 400Mhz 300Mhz 59.61C (60.15C) 2,443 440,035 11,714 1.21 0.72 1.93 90.24 0.00 0.00 0.00 9.76 546,288 kB/28.7%
21:57:11 1400Mhz 400Mhz 300Mhz 59.07C (60.15C) 2,370 374,059 11,103 1.70 0.24 1.70 89.62 0.00 0.00 0.24 10.38 545,924 kB/28.7%
21:57:12 600Mhz 250Mhz 250Mhz 59.07C (60.15C) 2,436 381,941 17,625 1.90 1.42 2.85 89.05 0.00 0.00 0.24 10.95 546,016 kB/28.7%
21:57:13 1200Mhz 400Mhz 300Mhz 59.07C (60.15C) 3,569 1,535,894 120,074 4.16 4.16 4.63 80.01 1.85 0.00 1.16 19.99 547,848 kB/28.5%
21:57:14 1200Mhz 400Mhz 300Mhz 60.69C (60.69C) 11,726 10,377,010 312,110 7.02 22.38 7.24 40.15 6.36 0.00 10.53 59.85 546,500 kB/28.6%
21:57:15 1200Mhz 400Mhz 300Mhz 62.30C (62.30C) 6,364 4,194,640 380,572 8.81 11.43 5.48 62.62 0.95 0.00 4.05 37.38 546,592 kB/28.6%
21:57:16 1200Mhz 250Mhz 250Mhz 61.22C (62.30C) 3,070 1,031,791 92,734 11.47 0.48 3.58 79.10 0.24 0.00 0.96 20.90 547,132 kB/28.6%
21:57:17 1200Mhz 400Mhz 300Mhz 61.22C (62.30C) 2,012 384 497 10.15 0.24 2.90 82.41 0.00 0.00 0.00 17.59 547,176 kB/28.6%
21:57:19 1200Mhz 400Mhz 300Mhz 61.76C (62.30C) 3,869 2,035,298 66,465 13.86 0.48 3.82 71.90 2.15 0.00 0.48 28.10 547,340 kB/28.5%
21:57:20 1200Mhz 400Mhz 300Mhz 62.30C (62.30C) 6,103 4,067,011 124,719 15.85 0.72 4.08 65.31 7.20 0.00 4.80 34.69 546,304 kB/28.7%
21:57:21 1200Mhz 400Mhz 300Mhz 62.30C (62.30C) 2,005 126 448 18.19 0.24 3.83 75.14 0.00 0.00 0.00 24.86 545,944 kB/28.7%
21:57:22 1200Mhz 400Mhz 300Mhz 62.30C (62.30C) 5,157 3,104,235 95,995 13.38 0.72 3.35 67.86 5.73 0.00 4.06 32.14 545,816 kB/28.7%
21:57:23 1200Mhz 400Mhz 300Mhz 62.84C (62.84C) 2,003 312 349 14.33 0.48 3.11 79.07 0.00 0.00 0.00 20.93 545,716 kB/28.7%
21:57:24 1200Mhz 400Mhz 300Mhz 62.84C (62.84C) 2,006 323 406 15.09 0.24 3.11 78.06 0.00 0.00 0.00 21.94 545,628 kB/28.8%
21:57:25 1200Mhz 400Mhz 300Mhz 62.84C (62.84C) 3,616 1,665,930 52,761 17.95 0.93 3.73 70.64 2.10 0.00 2.33 29.36 545,640 kB/28.8% press stop
21:57:26 1200Mhz 400Mhz 300Mhz 62.84C (62.84C) 4,347 2,323,439 71,099 15.30 0.72 4.30 70.52 3.35 0.00 3.11 29.48 545,904 kB/28.7%
21:57:27 1200Mhz 400Mhz 300Mhz 62.84C (62.84C) 8,262 6,259,249 443,156 17.68 0.48 7.65 56.16 5.74 0.00 3.58 43.84 545,720 kB/28.7%
21:57:28 1200Mhz 400Mhz 300Mhz 63.38C (63.38C) 9,226 7,192,690 217,412 12.39 2.38 4.05 60.30 7.86 0.00 8.10 39.70 543,092 kB/29.1%
21:57:29 1200Mhz 400Mhz 300Mhz 63.38C (63.38C) 13,905 12,298,970 322,128 8.26 6.52 6.31 57.84 1.09 0.00 8.70 42.16 530,352 kB/30.8%
21:57:30 1200Mhz 400Mhz 300Mhz 63.38C (63.38C) 13,182 11,545,148 323,475 7.97 3.75 5.86 48.97 15.00 0.00 5.39 51.03 533,760 kB/30.3%
21:57:31 1200Mhz 400Mhz 300Mhz 63.38C (63.38C) 13,553 11,702,432 327,832 6.51 0.48 4.82 56.86 14.70 0.00 4.58 43.14 533,556 kB/30.3%
21:57:32 1200Mhz 400Mhz 300Mhz 63.38C (63.38C) 13,621 11,452,958 323,133 0.24 0.72 4.80 65.75 13.68 0.00 2.40 34.25 534,156 kB/30.3%
21:57:33 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 11,099 8,966,015 261,146 5.17 1.18 4.94 59.97 14.82 0.00 3.53 40.03 533,388 kB/30.4%
21:57:34 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 11,119 8,610,073 272,929 2.41 9.17 5.31 52.34 16.64 0.00 3.62 47.66 534,060 kB/30.3%
21:57:35 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 11,481 9,586,355 264,868 0.47 0.47 4.97 63.44 16.81 0.00 3.08 36.56 533,884 kB/30.3% No Respone
21:57:36 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,795 11,698,293 323,162 0.00 0.72 5.29 58.93 20.93 0.00 1.92 41.07 533,456 kB/30.3%
21:57:37 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 14,203 12,044,085 333,332 0.24 0.47 5.20 54.59 25.76 0.00 1.42 45.41 534,208 kB/30.2%
Time ARM Core H264 Core Temp (Max) IRQ/s RX B/s TX B/s %user %nice %sys %idle %iowt %irq %s/irq %total Memory Free/Used
======== ======= ======= ======= =============== ====== ========== ========== ====== ====== ====== ====== ====== ====== ====== ====== ================
21:57:39 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,223 11,031,846 306,852 0.24 0.72 4.10 66.50 13.25 0.00 4.10 33.50 533,852 kB/30.3%
21:57:40 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,832 11,760,539 321,099 0.24 0.48 5.53 69.72 9.38 0.00 4.57 30.28 533,992 kB/30.3%
21:57:41 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,941 11,734,194 323,691 0.00 0.24 5.05 65.18 13.95 0.00 1.44 34.82 533,952 kB/30.3%
21:57:42 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,652 11,691,295 321,162 0.24 0.48 5.54 60.46 17.58 0.00 2.89 39.54 534,080 kB/30.3%
21:57:43 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,979 11,734,045 330,306 0.24 0.48 2.90 66.97 14.51 0.00 0.97 33.03 533,836 kB/30.3%
21:57:44 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,801 11,531,739 322,543 0.00 0.48 3.87 62.89 16.69 0.00 1.69 37.11 534,108 kB/30.3% Working again
21:57:45 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,941 11,642,527 330,888 0.24 0.48 4.59 64.53 14.26 0.00 2.90 35.47 533,896 kB/30.3%
21:57:46 1200Mhz 400Mhz 300Mhz 61.22C (63.38C) 14,017 11,789,726 332,089 0.24 0.72 4.33 61.86 16.85 0.00 4.09 38.14 533,940 kB/30.3%
21:57:47 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,230 11,043,290 317,334 1.91 2.87 4.78 60.66 14.81 0.00 3.10 39.34 533,400 kB/30.4%
21:57:48 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 14,132 12,109,940 332,290 0.71 1.90 4.51 62.92 14.96 0.00 2.37 37.08 534,144 kB/30.3%
21:57:49 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 13,843 11,459,161 681,667 2.15 3.34 5.01 48.48 24.12 0.00 3.10 51.52 533,876 kB/30.3%
21:57:50 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,843 11,528,505 336,795 2.16 2.16 5.77 60.36 14.67 0.00 1.92 39.64 533,536 kB/30.3%
21:57:51 1200Mhz 400Mhz 300Mhz 62.30C (63.38C) 13,919 11,573,952 337,603 2.14 0.95 4.76 59.72 16.18 0.00 4.04 40.28 533,328 kB/30.4%
21:57:52 1200Mhz 400Mhz 300Mhz 61.76C (63.38C) 14,095 11,718,445 338,790 2.60 0.94 5.20 62.83 13.70 0.00 5.91 37.17 533,508 kB/30.3%
but it's intresting i made another test:
Start liveTV but i does not wait a longer time... only about 1min and i does not stop i only go through the menues ans liveTV in the background....
The same output from your tool... but all works well. It's only after about 10min?!
My remote filesystem is via nfs from a (virtual) debian stretch server unning on a SSD and i have a fast respone from my server for filesystem operations... my movies are on normal hdd's and I'm able to copy with 100 Megabyte/s to My Workstation connected via 1G
About the network connection.. I will test it next weekend... because i split my connection in 2x 100M because i have only one Cat6 cable and my TV also needs network
And there is no Probelm with the latest stable Libreelec!
Thanks
Frank
2018-10-18, 23:04
New LibreELEC.tv Leia build #1018: RPi / RPi2
(Supercedes previous build)
SHA256 Checksum:
SHA256 Checksum:
Based on tip of LibreELEC.tv master (86e23ee, changelog) and tip of XBMC master (d6218df, changelog) with the following modifications:
(Supercedes previous build)
SHA256 Checksum:
94080ef609ef966a8fdcdfe8e3596b3521ef7e5f452a0912c4af526fa077637d (RPi)SHA256 Checksum:
5473d3bb657489f5f7f4eda6ba19698e1bb70c93bfd0aa3e3dcda06cfb557f40 (RPi2)# uname -a
Linux rpi512 4.18.14 #1 Thu Oct 18 21:04:21 BST 2018 armv6l GNU/Linux
# vcgencmd version
Oct 15 2018 17:24:22
Copyright © 2012 Broadcom
version 90bb730cc70ffe95957061587b4d07e26842a4f8 (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20181018210245-#1018-g86e23ee [Build #1018]
# Kodi version
(18.0-BETA4 Git:d6218df). Platform: Linux ARM 32-bit
Based on tip of LibreELEC.tv master (86e23ee, changelog) and tip of XBMC master (d6218df, changelog) with the following modifications:
- Includes newclock5 patches
- Includes latest commits from kernel branch rpi-4.18.y
- Includes latest bcm2835-driver master (10c1c5f, ahead +5)
- Includes latest kodi-platform master (e8574b8)
- Includes latest libcec master (8adc786)
- Includes latest libnfs master (6dfc87d, ahead +10)
- Includes latest p8-platform master (a822e19)
- Includes latest addons: inputstream.adaptive (2f0bc6d, +8), inputstream.rtmp (cf31ec5, +1), peripheral.joystick (2196056, +3), peripheral.xarcade (91567dd), pvr.argustv (e3f9781, +3), pvr.demo (998d890, +1), pvr.dvblink (cba64fc, +4), pvr.dvbviewer (46b0600, +1), pvr.filmon (08c389e, +4), pvr.hdhomerun (1669a33, +3), pvr.hts (b13a570, +1), pvr.iptvsimple (2134467, +3), pvr.mediaportal.tvserver (bca5311, +2), pvr.mythtv (ff2860d, +3), pvr.nextpvr (9b06fcd, +1), pvr.njoy (5605296, +1), pvr.octonet (203f800, +1), pvr.pctv (c20fed1, +3), pvr.stalker (cca5807, +3), pvr.teleboy (484db31, +1), pvr.vbox (cd73f9e, +1), pvr.vdr.vnsi (6bbdb78, +2), pvr.vuplus (bb7dd7f, +25), pvr.wmc (6a95f98, +1), pvr.zattoo (c6cd67f, +3), vfs.libarchive (eb71453, +2), vfs.sftp (47cb680, +1)
- Include [env] compare (perma): kodi: next (Nov 2018)
- Include [env] compare (perma): TESTING: increase timeout to ensure OS is able to create core dump/crash log
- Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
- Include [env] patch: kodi: use upstream repo for Milhouse RPi builds
- Include [env] patch: kodi: remove annoying, excessively repetitive addon logging
- Include [env] patch: rev hack for kodi
- Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
- Include [env] patch: Bump included addon versions to prevent online updates
- Include [env] patch: Add experimental splash video for RPi
- Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
- Include [env] PR:2993 (perma): Improve fs-resize, fix delay and simplify
- Include [env] PR:2999 (perma): Kernel support for recent Dell notebook Alps trackpads
- Include [env] PR:3001 (perma): DVB driver addons update to latest
- Include [env] PR:3006 (perma): linux (Generic/RPi): update to linux-4.18.14
- Include [env] PR:3038 (perma): xf86-video-nvidia: update to xf86-video-nvidia-410.66
- Include [pkg] PR:2723 (perma): "eth0: hw csum failure" logging (linux)
- Include [pkg] PR:14625 (perma): Allow a clean shutdown on window system failure
- linux: XBox DVD Remote uses 12 bits scancodes
- LibreELEC.tv:
- XBMC:
- inputstream.adaptive:
- Add Jenkinsfile (2f0bc6d)
- Add Jenkinsfile (2f0bc6d)
- newclock5:
- Additional commits/pull requests/changes not yet merged upstream:
2018-10-18, 23:10
(2018-10-18, 22:13)frank74 Wrote: About the network connection.. I will test it next weekend... because i split my connection in 2x 100M because i have only one Cat6 cable and my TV also needs network
You're maxing out your (artificially) limited network connection. If you've configured non-standard caching in Kodi then that might explain why some activities are taking longer.
I still have no idea why you are limiting your RPi3+ network connection to 100Mbps - your explanation makes no sense.
I would suggest you either fix your network (and accept that even at full capacity - ~330Mbps - it's still going to be more sluggish than a decent SD card). Or just buy a decent SD card and forget about booting over NFS.
I'm pretty sure the problems you are experiencing are of your own making...
2018-10-19, 00:03
Hi,
Is it possible to add the jsonmerge (python) 'url jsonmerge' to libreelec ?
Thanks in advance,
Wwark
Is it possible to add the jsonmerge (python) 'url jsonmerge' to libreelec ?
Thanks in advance,
Wwark
2018-10-19, 00:14
(2018-10-19, 00:03)wwark Wrote: Hi,
Is it possible to add the jsonmerge (python) 'url jsonmerge' to libreelec ?
Thanks in advance,
Wwark
Create an addon.
2018-10-19, 07:27
Hi,
limit the port of your 1gb/s router/switch conneted to your 100mb/s switch to 100mb/s. It solved the problem in my case and in Doldis.
limit the port of your 1gb/s router/switch conneted to your 100mb/s switch to 100mb/s. It solved the problem in my case and in Doldis.
2018-10-19, 11:36
I can fully confirm this.
...but sometimes i have still (little) problems with bluray over smb:// from time to time. ;-)
Buffering in the latest builds is present
...but sometimes i have still (little) problems with bluray over smb:// from time to time. ;-)
Buffering in the latest builds is present
2018-10-20, 01:52
New LibreELEC.tv Leia build #1019: RPi / RPi2
(Supercedes previous build)
SHA256 Checksum:
SHA256 Checksum:
Based on tip of LibreELEC.tv master (86e23ee, changelog) and tip of XBMC master (a3f5e1e, changelog) with the following modifications:
(Supercedes previous build)
SHA256 Checksum:
1f4d232b2623255d4faaf664e1ed4216d741214d1b87f99485a96fc8f7824e59 (RPi)SHA256 Checksum:
c72f5c5de57e3805e27cd34ee94cf9faed77be072718acde13588ba2565a9ffc (RPi2)# uname -a
Linux rpi512 4.18.14 #1 Sat Oct 20 00:24:40 BST 2018 armv6l GNU/Linux
# vcgencmd version
Oct 15 2018 17:24:22
Copyright © 2012 Broadcom
version 90bb730cc70ffe95957061587b4d07e26842a4f8 (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20181020002309-#1019-g86e23ee [Build #1019]
# Kodi version
(18.0-BETA4 Git:a3f5e1e). Platform: Linux ARM 32-bit
Based on tip of LibreELEC.tv master (86e23ee, changelog) and tip of XBMC master (a3f5e1e, changelog) with the following modifications:
- Includes newclock5 patches
- Includes latest commits from kernel branch rpi-4.18.y
- Includes latest bcm2835-driver master (8993bff, ahead +6)
- Includes latest kodi-platform master (e8574b8)
- Includes latest libcec master (8adc786)
- Includes latest libnfs master (6dfc87d, ahead +10)
- Includes latest p8-platform master (a822e19)
- Includes latest addons: inputstream.adaptive (45993f9), inputstream.rtmp (cf31ec5), peripheral.joystick (2196056), peripheral.xarcade (91567dd), pvr.argustv (e3f9781), pvr.demo (998d890), pvr.dvblink (cba64fc), pvr.dvbviewer (46b0600), pvr.filmon (08c389e), pvr.hdhomerun (1669a33), pvr.hts (b13a570), pvr.iptvsimple (2134467), pvr.mediaportal.tvserver (bca5311), pvr.mythtv (ff2860d), pvr.nextpvr (9b06fcd), pvr.njoy (5605296), pvr.octonet (203f800), pvr.pctv (c20fed1), pvr.stalker (cca5807), pvr.teleboy (484db31), pvr.vbox (cd73f9e), pvr.vdr.vnsi (6bbdb78), pvr.vuplus (bb7dd7f), pvr.wmc (6a95f98), pvr.zattoo (c6cd67f), vfs.libarchive (eb71453), vfs.sftp (47cb680)
- Include [env] compare (perma): kodi: next (Nov 2018)
- Include [env] compare (perma): TESTING: increase timeout to ensure OS is able to create core dump/crash log
- Include [env] patch: config/functions: next wave of cleanups
- Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
- Include [env] patch: kodi: use upstream repo for Milhouse RPi builds
- Include [env] patch: kodi: remove annoying, excessively repetitive addon logging
- Include [env] patch: rev hack for kodi
- Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
- Include [env] patch: Bump included addon versions to prevent online updates
- Include [env] patch: Add experimental splash video for RPi
- Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
- Include [env] PR:2993 (perma): Improve fs-resize, fix delay and simplify
- Include [env] PR:2999 (perma): Kernel support for recent Dell notebook Alps trackpads
- Include [env] PR:3001 (perma): DVB driver addons update to latest
- Include [env] PR:3006 (perma): linux (Generic/RPi): update to linux-4.18.14
- Include [env] PR:3038 (perma): xf86-video-nvidia: update to xf86-video-nvidia-410.66
- Include [env] PR:3041 (perma): busybox: quit countdown timers on keyboard input
- Include [env] PR:3042 (perma): busybox: update to 1.29.3
- Include [env] PR:3043 (perma): mesa: update to mesa-18.2.3
- Include [pkg] PR:2723 (perma): "eth0: hw csum failure" logging (linux)
- busybox: update to 1.29.3
- DVB addons - enable more options
- XBMC:
- [cmake][addons] package CUSTOM_DATA & ADDITIONAL_BINARY for posix (PR:14646, 1 commit, 1 file changed)
- [GBM] add vt handler utility (PR:14627, 1 commit, 5 files changed)
- X11: fixes a lot of misses in VideoReferenceClock OML (PR:14637, 1 commit, 1 file changed)
- [Feature][skin.estuary] add support for artist-slideshow add-on (PR:14558, 1 commit, 3 files changed)
- Allow a clean shutdown on window system failure (PR:14625, 4 commits, 8 files changed)
- [cmake][addons] package CUSTOM_DATA & ADDITIONAL_BINARY for posix (PR:14646, 1 commit, 1 file changed)
- inputstream.adaptive:
- Version bump 2.3.2 (45993f9)
- Version bump 2.3.2 (45993f9)
- newclock5:
- Additional commits/pull requests/changes not yet merged upstream:
- Updated: [env] compare (perma): kodi: next (Nov 2018)
- Added: [env] patch: config/functions: next wave of cleanups
- Updated: [env] PR:3001 (perma): DVB driver addons update to latest
- Added: [env] PR:3041 (perma): busybox: quit countdown timers on keyboard input
- Added: [env] PR:3042 (perma): busybox: update to 1.29.3
- Added: [env] PR:3043 (perma): mesa: update to mesa-18.2.3
- Updated: [env] compare (perma): kodi: next (Nov 2018)
2018-10-20, 14:50
Since Build #1017 (maybe earlier), i can't choose a Update Channel or a Update File within Libreelec Configuration.
2018-10-20, 15:38
(2018-10-20, 14:50)DTR81 Wrote: Since Build #1017 (maybe earlier), i can't choose a Update Channel or a Update File within Libreelec Configuration.This was due to a server configuration change that started using Cloudflare yesterday - as of about an hour ago the server change has been reverted.
2018-10-21, 14:35
(2018-10-03, 19:36)denk Wrote: Hi,
since I am using Milhouse builds on my Pi, I always have the issue, that I cannot use DVD menus. Navigation using my remote or keyboard only works blind, i.e. the cursor doesn't move. Sometimes, not reproducable, there is even no cursor rendered. The only way to safely navigate in DVD menus is via mouse control.
I am not sure, if this is a general problem of Kodi or of Milhouse builds.
Do you need further information?
Thanks, especially for your work with providing the builds
Hi again,
as my post was during your short break in providing new builds I would like to ask again for help with my DVD menu navigation problem. Do you need anything from me to investigate this?
Thanks in advance
