Posts: 149
Joined: Apr 2014
Reputation:
3
2017-11-14, 06:27
(This post was last modified: 2017-11-14, 06:27 by pacoma2610.)
yes i have read, but using a original MCE Remote not a Harmony
Posts: 256
Joined: May 2016
Reputation:
14
2017-11-14, 07:47
(This post was last modified: 2017-11-14, 07:47 by debutanker.)
Can confirm different remote behaviour since build #1112 too (NUC KL).
Since i am harmony user, setting the command repeats to "0" (with build #1112 it was the first time i had to do this!), fixed it for me.
Posts: 142
Joined: Oct 2013
Reputation:
1
tavoc
Senior Member
Posts: 142
Hello Milhouse,
I am using your build 1107 and have a problem with my screen resolution / aspect ratio.
Before I was running a Ubuntu server 16.04 with Kodi, but because of Amazon I switched to your build.
My TV is set up at 1920x1080@50Hz. But when I watch PVR or recordings I have suddenly black bars, where before there were none.
As a workaround I have to set the black border reduction to 20% (which was never necessary). Even on programs which sends in 16:9.
I further noticed that while in a film I can reduce this behaviour for a moment when switching from 50 to 60 Hz. Then it works as expected, until I move to a different film.
Has anyone noticed this? Which kind of Logfile is necessary to show this problem? Or should I post screenshots?
Backend: Asrock N3150 with Ubuntu 22.04 Server with TvHeadend
Living Room: Nvidia Shield with Kodi
Other Kodi Clients: Coreelec, Mibox, Windows
Posts: 149
Joined: Apr 2014
Reputation:
3
Output with #1111 (works perfect)
Found /sys/class/rc/rc0/ (/dev/input/event8) with:
Driver ite-cir, table rc-rc6-mce
Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc nec rc-6
Name: ITE8708 CIR transceiver
bus: 25, vendor/product: 1283:0000, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Output with #1113 (double Key-input
LivingRoom:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event8) with:
Driver ite-cir, table rc-rc6-mce
Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc nec rc-6
Name: ITE8708 CIR transceiver
bus: 25, vendor/product: 1283:0000, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
This "Then run ir-keytable -t, press a button for a short time, wait a second or two, then press another button for a bit longer (1 or 2 seconds). Post the output you got on the console, it should look like that:
Code:" has no effect to my system