Thread Closed
v18 LibreELEC Testbuilds for x86_64 (Kodi 18.0)
(2018-05-01, 18:59)HiassofT Wrote:
(2018-05-01, 13:41)TheKraut Wrote: Hi Hias,

Here you go: full log (individual output separated by "*** BEGIN OF" / "*** END OF").

LE #0430, installed to and booted from SD card, no settings changed except debug log and SSH enabled, as well as WiFi connected.
RC stopped working again after a couple of key presses.

Neither irw, nor ir-keytable, nor ir-ctl would give any output after the RC stopped working. However, irw always provides output as expected until the RC fades away.
Thanks for the logs! Unfortunately there's nothing in there that indicates why the IR receiver stopped working. With ir-ctl -r you should see the raw IR data, actually IR signals from any remote.

I googled a bit and found this thread about pervious year's NUC models and a similar issue as yours:

As you seem to get the same issue on Ubuntu 18.04 I'm wondering if it could be a general problem with the NUCs and Intel needs to fix their BIOS, firmwares etc.

A quick check with Win 10 could be worth a try. If you get the same issue there contact Intel. If it works on Win 10 but not Ubuntu it'd be best if you contacted Ubuntu about that - they have slightly larger support resources than we have so if anything needs fixing in the Linux kernel they are probably better suited for the job than us (and we'd in turn get the fix via standard kernel updates or could pick/backport it).

so long,

Hi Hias,

Thanks for your time and effort. The link is very helpful indeed.

Kinda looks like a BIOS issue at this point - which, however, wouldn't really explain everything functioning well in the LE installer, would it?!

Right now, unfortunately, I don't have the spare time (nor the spare SATA drive) to check with Windows 10. I'll wait for the next BIOS update at this point, see if that brings any progress, and report accordingly.

As a side note, it simply amazes me how Intel manages to mess up an originally great (HTPC) product such as the NUCs by poor software - be it audio passtrough in NUC6s or the RC mess in NUC7s...

Thanks again and keep up the great work!
  Thread Closed
Thread Rating:
  • 24 Vote(s) - 4.5 Average

Messages In This Thread
RE: LibreELEC Testbuilds for x86_64 (Kodi 18.0) - by TheKraut - 2018-05-01, 20:12