•   
  • 1
  • 351
  • 352
  • 353(current)
  • 354
  • 355
  •   
  Thread Closed
v18 LibreELEC Testbuilds for x86_64 (Kodi 18.0)
@smp1 6.04-pre2 seems to be OK, but 6.04-pre3 fails. I haven't been able to determine the exact commit as syslinux uses sub-modules and has to be packaged in order to build it, and I'm not currently able to package it correctly. My best guess is that https://repo.or.cz/syslinux.git/commit/3...321f738f00 is likely to be the troublesome commit, but that's just a guess as bisecting syslinux is a PITA.

For your Gemini Lake problem, have you tried the Chromebook fix for 6.03 mentioned on this page: https://wiki.syslinux.org/wiki/index.php?title=Building
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
@Milhouse @smp1 syslinux-6.04-pre3 is known to fail. Don't waste your time confirming this.

There has been some discussion on the Syslinux Mailing List and a WIP git branch exist.
(2019-04-08, 19:18)mglae Wrote: @Milhouse @smp1 syslinux-6.04-pre3 is known to fail. Don't waste your time confirming this.

There has been some discussion on the Syslinux Mailing List and a WIP git branch exist.

Thanks yes, just found the mailing list posts:

https://www.syslinux.org/archives/2019-F...26330.html
https://www.syslinux.org/archives/2019-F...26335.html
https://www.syslinux.org/archives/2019-M...26360.html

I guess try again with 6.04-pre4 in 2020 or whenever. Smile
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2019-04-08, 18:18)Milhouse Wrote: @smp1 6.04-pre2 seems to be OK

Thanks for testing. 6.04-pre2 does indeed work and it fixed the intermittent boot issue with J4105B-ITX board - I rebooted it multiple times and it survived 50+ reboot cycles with no problems.
New LibreELEC.tv Leia build #0408: Generic
(Supercedes previous build)

SHA256 Checksum: 5f5670913f5787bc60a75e0d3567a7929e475795de340e444fc4fc51ef27fef8 (Generic)

# uname -a
Linux NUC 5.0.7 #1 SMP Mon Apr 8 21:40:16 BST 2019 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse): devel-20190408213430-#0408-g51adb4d [Build #0408]

# Kodi version
Kodi (18.2-RC1 Git:4077a17). Platform: Linux x86 64-bit

Based on tip of LibreELEC.tv master (51adb4d, changelog) and tip of XBMC master (4077a17, changelog) with the following modifications:
  • Includes latest kodi-platform master (e8574b8)
  • Includes latest libcec master (ba9b538, ahead +1)
  • Includes latest libnfs master (4bd145b, ahead +2)
  • Includes latest p8-platform master (1eb12b1)
  • Includes latest addons: inputstream.adaptive (5600fa1, +4), inputstream.rtmp (ce68b77, +1), peripheral.joystick (910bd3d, +8), peripheral.xarcade (d218f0d, +6), pvr.argustv (83aa1e9), pvr.demo (964686d, +3), pvr.dvblink (ecc9cfd), pvr.dvbviewer (c2c1beb, +2), pvr.filmon (e850633), pvr.hdhomerun (a9d7309), pvr.hts (8dcd62d), pvr.iptvsimple (73feb2f), pvr.mediaportal.tvserver (931afab), pvr.mythtv (179b6ea, +2), pvr.nextpvr (d6bf9a3, +4), pvr.njoy (4467cac, +4), pvr.octonet (203f800), pvr.pctv (b60b971), pvr.stalker (d0170c5), pvr.teleboy (1956113), pvr.vbox (ea20464), pvr.vdr.vnsi (cbb75ab), pvr.vuplus (4f0de0e, +33), pvr.waipu (339c3dc, +4), pvr.wmc (7b28be3), pvr.zattoo (667b986, +2), vfs.libarchive (2ba1102), vfs.rar (e6b5114, +4), vfs.sftp (ab0dc82, +2)
  • Include [env] db280be: samba: set fruit:model = Xserve for macOS finder
  • Include [env] compare (perma): TESTING: increase timeout to ensure OS is able to create core dump/crash log
  • Include [env] compare (perma): kodi: fix patch, bump ffmpeg-4.0.3-Leia-18.2
  • Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  • Include [env] patch: kodi: use upstream repo for Milhouse RPi builds
  • Include [env] patch: kodi: remove annoying, excessively repetitive addon logging
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: rev hack for kodi
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
  • Include [env] PR:2431 (perma): Add PKG_STAMP to trigger a package rebuild
  • Include [env] PR:3357 (perma): Add nghttp2 support
  • Include [env] PR:3375 (perma): linux (RPi/Generic): update to linux-5.0.7
  • Include [env] PR:3393 (perma): arm-mem: update to arm-mem-0100445, enable for all arm builds
  • Include [env] PR:3395 (perma): libtool: don't install source files on target
  • Include [env] PR:3396 (perma): RTL8192DU: fix build for Kernel 3.14.29 / Project Amlogic_Legacy
  • Include [env] PR:3397 (perma): libxkbcommon: updated to 0.8.4 / added meson opts & LE copyright
  • Include [env] PR:3398 (perma): xkeyboard-config: updated to 2.26 / added fix for broken pt layout / updated build & added LE copyright
  • Include [env] PR:3399 (perma): cmake: update to cmake-3.14.1
  • Include [env] PR:3400 (perma): llvm: update to llvm-8.0.0
  • Include [env] PR:3401 (perma): nano: updated to nano-4.0 / added Team LibreELEC copyright
  • Include [env] PR:3402 (perma): Enable uvcvideo driver as kernel module
  • Include [env] PR:3408 (perma): samba: update to samba-4.9.6
  • Include [env] PR:3410 (perma): New infolabel Skin.Name
  • Include [pkg] patch: kodi: fix addon platform_tag (kodi)
  • Include [pkg] PR:123 (perma): add PIN lock option to LE Settings (service.libreelec.settings)
  • Include [pkg] PR:124 (perma): Fix duplicate bluetooth devices (service.libreelec.settings)
  • Include [pkg] PR:125 (perma): Fixes for connman module (service.libreelec.settings)
  • Include [pkg] PR:126 (perma): Properly fix duplicate bluetooth devices (service.libreelec.settings)
  • Include [pkg] PR:127 (perma): fix missing flags (service.libreelec.settings)
  • Include [pkg] PR:128 (perma): Move all textures to common folder / Clean-up textures (service.libreelec.settings)
  • Include [pkg] PR:129 (perma): updates: notify user if custom url is not accessible (service.libreelec.settings)
  • Include [pkg] PR:130 (perma): make Estuary elements conditional (service.libreelec.settings)
  • Include [pkg] PR:14571 (perma): Remove ARB postfix from GL functions
  • Include [pkg] PR:15164 (perma): TexturePacker: Fix memory / resource leak the ugly way
  • Include [pkg] PR:15356 (perma): Optimize locking in ApplicationMessenger
  • Include [pkg] PR:15771 (perma): RetroPlayer: Move rendering calls to initialize/deinitialize methods
Build Highlights:
  1. samba: update to samba-4.9.6 (security fixes)
  2. make Estuary elements conditional (service.libreelec.settings)
Build Details:
  1. LibreELEC.tv:
    • mkpkg_media_build wrong linux_media location. (PR:3407, 1 commit, 1 file changed)
  2. XBMC:
    • [cleanup] remove retroplayer leftovers after #14209 (PR:15879, 1 commit, 8 files changed)
    • [Android] Prevent modeswitch when native_window is invalid (PR:15878, 1 commit, 1 file changed)
    • DVDDemuxFFmpeg: Do not discard stream indexes belonging to program (PR:15873, 1 commit, 1 file changed)
    • Find 3:2 pullback when searching for matching resolutions (PR:15877, 1 commit, 1 file changed)
  3. pvr.mythtv:
    • send allow shutdown to the backend on deactivating gui (2293984)
    • bump version 5.10.7 (179b6ea)
  4. Additional commits/pull requests/changes not yet merged upstream:
    • Updated: [env] PR:3375 (perma): linux (RPi/Generic): update to linux-5.0.7
    • Added: [env] PR:3408 (perma): samba: update to samba-4.9.6
    • Added: [env] PR:3410 (perma): New infolabel Skin.Name
    • Added: [pkg] PR:130 (perma): make Estuary elements conditional (service.libreelec.settings)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Weekly Linux 5.1-rc4 build #0408x: Generic

Known issues:

No dvb-latest or crazycat drivers
No xf86-video-nvidia-legacy (panics)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2019-02-19, 16:23)phunkyfish Wrote: Running on Gemini Lake N5005 and J5005 (Nuc7pjyh) I had an issue having to bring up the overlay to kick the GPU into running at a higher frequency. This also helped with the audio lag.

I had been using the following in autostart.sh to force the GPU to run at a higher frequency all the time:

Code:

(
echo 400 > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
) &

This has stopped working in recent builds (havn't figured out which one yet) and I assume is due to a graphics driver upgrade. Anyone on the forum found a workaround to this?

Thanks

Did you figure out how to make custom gt_min_freq_mhz setting permanent?

Edit: Nevermind, adding it to autostart.sh actually works. It always stays at max frequency when playing video (I use 750 Mhz) and switch to 100 Mhz when Kodi does nothing.
(2019-04-09, 01:54)smp1 Wrote:
(2019-02-19, 16:23)phunkyfish Wrote: Running on Gemini Lake N5005 and J5005 (Nuc7pjyh) I had an issue having to bring up the overlay to kick the GPU into running at a higher frequency. This also helped with the audio lag.

I had been using the following in autostart.sh to force the GPU to run at a higher frequency all the time:

Code:

(
echo 400 > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
) &

This has stopped working in recent builds (havn't figured out which one yet) and I assume is due to a graphics driver upgrade. Anyone on the forum found a workaround to this?

Thanks

Did you figure out how to make custom gt_min_freq_mhz setting permanent?

Edit: Nevermind, adding it to autostart.sh actually works. It always stays at max frequency when playing video (I use 750 Mhz) and switch to 100 Mhz when Kodi does nothing.

Can you post the actual content of your autostart.sh? Would like to check it against mine. Also the what device are you running on?
Maintainer of Enigma2 PVR addon: repo, docschangelog
How to create a full debug: here
I've just jumped back across to LibreElec after a while on Windows but found that my remote no longer works with anything after build #311.

I'm using a Logitech Harmony Remote which is using a combination of MCE Remote commands (for the directional buttons and OK) and the MCE Keyboard for all the other buttons.  The method used to do this is detailed here.

Here are the debug logs from builds #311 and #312.  Everything works fine in 311 and then in 312, only the directional buttons remain working.  Running "ir-keytable -p mce_kbd" on #312 says it's switched to the MCE keyboard but it still doesn't work (tested with an actual MCE keyboard to make sure it isn't the remote).  Running "ir-keytable -p mce_kbd" on earlier builds makes the keyboard start working immediately (before using the above method to automatically set that at startup).

Anyone know what broke MCE keyboards in #312+ ?  Thanks!
(2019-04-09, 11:22)beeswax Wrote: I've just jumped back across to LibreElec after a while on Windows but found that my remote no longer works with anything after build #311.

I'm using a Logitech Harmony Remote which is using a combination of MCE Remote commands (for the directional buttons and OK) and the MCE Keyboard for all the other buttons.  The method used to do this is detailed here.

Here are the debug logs from builds #311 and #312.  Everything works fine in 311 and then in 312, only the directional buttons remain working.  Running "ir-keytable -p mce_kbd" on #312 says it's switched to the MCE keyboard but it still doesn't work (tested with an actual MCE keyboard to make sure it isn't the remote).  Running "ir-keytable -p mce_kbd" on earlier builds makes the keyboard start working immediately (before using the above method to automatically set that at startup).

Anyone know what broke MCE keyboards in #312+ ?  Thanks!
With the newer kernel MCE keyboard handling has changed. Previously a separate input device was created for the MCE keyboard (which was then seen as a "keyboard" by the system), whereas current kernels send MCE keyboard events through the standard RC input device - so these events are now routed through eventlircd and Kodi sees them as Lirc events, not keyboard events.

As you are using a Harmony remote I'd recommed you configure it as just a standard MCE remote and better stay away from MCE keyboard. Supporting just the MCE keyboard would be rather easy but supporting both a MCE remote and a MCE keyboard is rather tricky.

so long,

Hias
(2019-04-09, 09:41)phunkyfish Wrote:
(2019-04-09, 01:54)smp1 Wrote:
(2019-02-19, 16:23)phunkyfish Wrote: Running on Gemini Lake N5005 and J5005 (Nuc7pjyh) I had an issue having to bring up the overlay to kick the GPU into running at a higher frequency. This also helped with the audio lag.

I had been using the following in autostart.sh to force the GPU to run at a higher frequency all the time:

Code:

(
echo 400 > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
) &

This has stopped working in recent builds (havn't figured out which one yet) and I assume is due to a graphics driver upgrade. Anyone on the forum found a workaround to this?

Thanks

Did you figure out how to make custom gt_min_freq_mhz setting permanent?

Edit: Nevermind, adding it to autostart.sh actually works. It always stays at max frequency when playing video (I use 750 Mhz) and switch to 100 Mhz when Kodi does nothing.    

Can you post the actual content of your autostart.sh? Would like to check it against mine. Also the what device are you running on?    
 
Code:
echo 750 > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
Running on Asrock J4105B-ITX board.
(2019-04-09, 14:45)smp1 Wrote:
(2019-04-09, 09:41)phunkyfish Wrote:
(2019-04-09, 01:54)smp1 Wrote: Did you figure out how to make custom gt_min_freq_mhz setting permanent?

Edit: Nevermind, adding it to autostart.sh actually works. It always stays at max frequency when playing video (I use 750 Mhz) and switch to 100 Mhz when Kodi does nothing.    

Can you post the actual content of your autostart.sh? Would like to check it against mine. Also the what device are you running on?     
Code:
echo 750 > /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
Running on Asrock J4105B-ITX board. 

Thanks!
Maintainer of Enigma2 PVR addon: repo, docschangelog
How to create a full debug: here
(2019-04-09, 12:21)HiassofT Wrote:
(2019-04-09, 11:22)beeswax Wrote: I've just jumped back across to LibreElec after a while on Windows but found that my remote no longer works with anything after build #311.

I'm using a Logitech Harmony Remote which is using a combination of MCE Remote commands (for the directional buttons and OK) and the MCE Keyboard for all the other buttons.  The method used to do this is detailed here.

Here are the debug logs from builds #311 and #312.  Everything works fine in 311 and then in 312, only the directional buttons remain working.  Running "ir-keytable -p mce_kbd" on #312 says it's switched to the MCE keyboard but it still doesn't work (tested with an actual MCE keyboard to make sure it isn't the remote).  Running "ir-keytable -p mce_kbd" on earlier builds makes the keyboard start working immediately (before using the above method to automatically set that at startup).

Anyone know what broke MCE keyboards in #312+ ?  Thanks!
With the newer kernel MCE keyboard handling has changed. Previously a separate input device was created for the MCE keyboard (which was then seen as a "keyboard" by the system), whereas current kernels send MCE keyboard events through the standard RC input device - so these events are now routed through eventlircd and Kodi sees them as Lirc events, not keyboard events.

As you are using a Harmony remote I'd recommed you configure it as just a standard MCE remote and better stay away from MCE keyboard. Supporting just the MCE keyboard would be rather easy but supporting both a MCE remote and a MCE keyboard is rather tricky.

so long,

Hias  
Thanks Hias,

Oh dear, that's a shame.  Can you tell me how I switch to using pure MCE keyboard in the newer kernel?  The remote is too limited to switch to using only that, whereas the keyboard offers, well, a full keyboard so mapping standard Kodi commands is really simple with the Logitech Harmony software.

I seem to remember I had to use the combination of kb and remote because the responsiveness of the directional buttons when using the MCE kb was poor but as stated, the keyboard offers far more mappings and easier config in the Harmony software.  Hopefully the directional and [OK/Select] responsiveness is better now, if not I guess I'll be stuck on #311 forever!
(2019-04-09, 16:50)beeswax Wrote: Oh dear, that's a shame.  Can you tell me how I switch to using pure MCE keyboard in the newer kernel?
If you create an empty 98-eventlircd.rules file eventlircd processing will be disabled and the MCE keyboard will work like before:
Code:
: > /storage/.config/udev.rules.d/98-eventlircd.rules
With eventlircd disabled MCE remote buttons will still mostly work, but some like KEY_OK or KEY_CHANNELUP/DOWN will stop working. If you want to use these you'll need to remap then to supported key codes (eg KEY_ENTER, KEY_PAGEUP/DOWN) via a custom rc_keymap file (you can use rc6_mce as a base and just change the keycodes you need).

so long,

Hias
New LibreELEC.tv Leia build #0409: Generic
(Supercedes previous build)

SHA256 Checksum: fca201287dde75ff013b3b9a44a011b3a710f5186e1780058da54e18b57e7e46 (Generic)

# uname -a
Linux NUC 5.0.7 #1 SMP Tue Apr 9 21:04:51 BST 2019 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse): devel-20190409210322-#0409-ga2cd6c2 [Build #0409]

# Kodi version
Kodi (18.2-RC1 Git:d1161f9). Platform: Linux x86 64-bit

Based on tip of LibreELEC.tv master (a2cd6c2, changelog) and tip of XBMC master (d1161f9, changelog) with the following modifications:
  • Includes latest kodi-platform master (e8574b8)
  • Includes latest libcec master (ba9b538, ahead +1)
  • Includes latest libnfs master (4bd145b, ahead +2)
  • Includes latest p8-platform master (1eb12b1)
  • Includes latest addons: inputstream.adaptive (5600fa1, +4), inputstream.rtmp (ce68b77, +1), peripheral.joystick (910bd3d, +8), peripheral.xarcade (d218f0d, +6), pvr.argustv (83aa1e9), pvr.demo (964686d, +3), pvr.dvblink (ecc9cfd), pvr.dvbviewer (c2c1beb, +2), pvr.filmon (e850633), pvr.hdhomerun (a9d7309), pvr.hts (8dcd62d), pvr.iptvsimple (73feb2f), pvr.mediaportal.tvserver (931afab), pvr.mythtv (179b6ea, +2), pvr.nextpvr (d6bf9a3, +4), pvr.njoy (4467cac, +4), pvr.octonet (203f800), pvr.pctv (b60b971), pvr.stalker (d0170c5), pvr.teleboy (1956113), pvr.vbox (ea20464), pvr.vdr.vnsi (cbb75ab), pvr.vuplus (4f0de0e, +33), pvr.waipu (339c3dc, +4), pvr.wmc (7b28be3), pvr.zattoo (667b986, +2), vfs.libarchive (2ba1102), vfs.rar (e6b5114, +4), vfs.sftp (ab0dc82, +2)
  • Include [env] db280be: samba: set fruit:model = Xserve for macOS finder
  • Include [env] compare (perma): TESTING: increase timeout to ensure OS is able to create core dump/crash log
  • Include [env] compare (perma): kodi: fix patch, bump ffmpeg-4.0.3-Leia-18.2
  • Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
  • Include [env] patch: kodi: use upstream repo for Milhouse RPi builds
  • Include [env] patch: kodi: remove annoying, excessively repetitive addon logging
  • Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
  • Include [env] patch: Bump included addon versions to prevent online updates
  • Include [env] patch: rev hack for kodi
  • Include [env] patch: Add experimental splash video for RPi
  • Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
  • Include [env] PR:2431 (perma): Add PKG_STAMP to trigger a package rebuild
  • Include [env] PR:3357 (perma): Add nghttp2 support
  • Include [env] PR:3375 (perma): linux (RPi/Generic): update to linux-5.0.7
  • Include [env] PR:3393 (perma): arm-mem: update to arm-mem-0100445, enable for all arm builds
  • Include [env] PR:3395 (perma): libtool: don't install source files on target
  • Include [env] PR:3396 (perma): RTL8192DU: fix build for Kernel 3.14.29 / Project Amlogic_Legacy
  • Include [env] PR:3397 (perma): libxkbcommon: updated to 0.8.4 / added meson opts & LE copyright
  • Include [env] PR:3398 (perma): xkeyboard-config: updated to 2.26 / added fix for broken pt layout / updated build & added LE copyright
  • Include [env] PR:3399 (perma): cmake: update to cmake-3.14.1
  • Include [env] PR:3400 (perma): llvm: update to llvm-8.0.0
  • Include [env] PR:3401 (perma): nano: updated to nano-4.0 / added Team LibreELEC copyright
  • Include [env] PR:3402 (perma): Enable uvcvideo driver as kernel module
  • Include [env] PR:3410 (perma): New infolabel Skin.Name
  • Include [env] PR:3411 (perma): dav1d: updated to 0.2.1 / added meson opts to disable tools & tests
  • Include [pkg] patch: kodi: fix addon platform_tag (kodi)
  • Include [pkg] PR:123 (perma): add PIN lock option to LE Settings (service.libreelec.settings)
  • Include [pkg] PR:124 (perma): Fix duplicate bluetooth devices (service.libreelec.settings)
  • Include [pkg] PR:125 (perma): Fixes for connman module (service.libreelec.settings)
  • Include [pkg] PR:126 (perma): Properly fix duplicate bluetooth devices (service.libreelec.settings)
  • Include [pkg] PR:127 (perma): fix missing flags (service.libreelec.settings)
  • Include [pkg] PR:128 (perma): Move all textures to common folder / Clean-up textures (service.libreelec.settings)
  • Include [pkg] PR:129 (perma): updates: notify user if custom url is not accessible (service.libreelec.settings)
  • Include [pkg] PR:130 (perma): make Estuary elements conditional (service.libreelec.settings)
  • Include [pkg] PR:14571 (perma): Remove ARB postfix from GL functions
  • Include [pkg] PR:15164 (perma): TexturePacker: Fix memory / resource leak the ugly way
  • Include [pkg] PR:15356 (perma): Optimize locking in ApplicationMessenger
  • Include [pkg] PR:15771 (perma): RetroPlayer: Move rendering calls to initialize/deinitialize methods
Build Highlights:
  1. dav1d: updated to 0.2.1 / added meson opts to disable tools & tests
Build Details:
  1. LibreELEC.tv:
    • gcc-linaro toolchains: bump to 8.3-2019.03 and rename to gcc-arm (PR:3394, 5 commits, 6 files changed)
    • samba: update to samba-4.9.6 (PR:3408, 1 commit, 1 file changed)
  2. XBMC:
    • CRenderBufferPoolGBM: use DRM_FORMAT_ARGB1555 for AV_PIX_FMT_RGB555 (PR:15883, 1 commit, 1 file changed)
  3. Additional commits/pull requests/changes not yet merged upstream:
    • Updated: [env] PR:3398 (perma): xkeyboard-config: updated to 2.26 / added fix for broken pt layout / updated build & added LE copyright
    • Updated: [env] PR:3410 (perma): New infolabel Skin.Name
    • Added: [env] PR:3411 (perma): dav1d: updated to 0.2.1 / added meson opts to disable tools & tests
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
  •   
  • 1
  • 351
  • 352
  • 353(current)
  • 354
  • 355
  •   
  Thread Closed
 
Thread Rating:
  • 24 Vote(s) - 4.5 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for x86_64 (Kodi 18.0)4.524