[hjanko]

Hello,

Normally i don't do cross posting, but i also started a thread at the TVheadend Forum. There is just very few traffic over there, which i recognized to late.


Usually i'm not the best with computers but i get my things running and done.
But with LibreElec, Kodi and TVHeadEnd i'm feel like the dummy of this decade.
This is my now 2nd attempt to get it running, the last attempt was over 1 year ago. i gave up and now i thionk it is time to make that step.
And i definatly read any guide, walkthrough etc.
Something else - with the same cables (from the Sat Dish) i can watch TV on my Win10 computer.
First - the machine:
LibreElec 8.2.5 installed on a SSD with Kodi and Tvheadend 4.2
A S1150 Board with a Celeron G1840 & 4Gb Ram - internal Graphik
Twin DVBS2 DVBSky S952 V3 brand new
What says the machine asked with putty?
dmesg | grep DVB
[ 3.392946] dvbdev: DVB: registering new adapter (SMI_DVB)
[ 3.724279] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)...
[ 3.731834] dvbdev: DVB: registering new adapter (SMI_DVB)
[ 3.974208] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88RS6000)...
[ 24.333610] SMI PCIe driver 0000:03:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)
[ 27.339287] SMI PCIe driver 0000:03:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
Because i need something like a step by step advise i would ask the first question:
That looks ok?

[bubblegum57]

First off, try posting this in the Libreelec forums. 

this is a pretty good guide  http://www.futeko.com/newforum/index.php...0#msg20770

But firstly, you need to be able to see the tuner. If you can't then perhaps you need to install craztcat drivers, go to Libreelec for this