2011-11-16, 12:52
I'm using the following input.conf file but not matter what, it seems it doesn't have any affect on my remote.
Only the default buttons are working.
Any ideas?
BTW, how can I know for sure that it was kitlaan version which was installed?
Only the default buttons are working.
Any ideas?
BTW, how can I know for sure that it was kitlaan version which was installed?
Code:
# Configuration file for the input service
# This section contains options which are not specific to any
# particular interface
[General]
# Set idle timeout (in seconds) before the connection will
# be disconnect (defaults to 0 for no timeout)
#IdleTimeout=600
# This section contains options that are specific to a device
#[00:11:22:33:44:55]
#
# Set a custom idle timeout (in seconds) for this specific device
#IdleTimeout=30
# This section is the PS3 Remote keymap. It is loaded when bluez starts.
# Use 'uinput.h' from bluez sources or '/usr/include/linux/input.h' for
# a list of possible KEY_* values.
#
[PS3 Remote Map]
# When the 'OverlayBuiltin' option is TRUE (the default), the keymap uses
# the built-in keymap as a starting point. When FALSE, an empty keymap is
# the starting point.
#OverlayBuiltin = TRUE
# The mapping below is the bluez internal configuration. You'll want to
# customize it; some recommendations for XBMC are specified.
0x16 = KEY_S # EJECT
0x64 = KEY_A # AUDIO (XBMC recommendation: KEY_A)
0x65 = KEY_Z # ANGLE (XBMC recommendation: KEY_Z)
0x63 = KEY_T # SUBTITLE (XBMC recommendation: KEY_T)
0x0f = KEY_DELETE # CLEAR (XBMC recommendation: KEY_DELETE)
0x28 = KEY_END # TIMER (XBMC recommendation: KEY_END)
0x00 = KEY_1 # NUM-1
0x01 = KEY_2 # NUM-2
0x02 = KEY_3 # NUM-3
0x03 = KEY_4 # NUM-4
0x04 = KEY_5 # NUM-5
0x05 = KEY_6 # NUM-6
0x06 = KEY_7 # NUM-7
0x07 = KEY_8 # NUM-8
0x08 = KEY_9 # NUM-9
0x09 = KEY_0 # NUM-0
0x81 = KEY_F7 # RED (XBMC recommendation: KEY_F7)
0x82 = KEY_F8 # GREEN (XBMC recommendation: KEY_F8)
0x80 = KEY_F9 # BLUE (XBMC recommendation: KEY_F9)
0x83 = KEY_F10 # YELLOW (XBMC recommendation: KEY_F10)
0x70 = KEY_H # DISPLAY (XBMC recommendation: KEY_D)
0x1a = KEY_MENU # TOP MENU
0x40 = KEY_F11 # POP UP/MENU (XBMC recommendation: KEY_F11)
0x0e = KEY_ESC # RETURN
0x5c = KEY_C # TRIANGLE/OPTIONS (XBMC recommendation: KEY_C)
0x5d = KEY_BACKSPACE # CIRCLE/BACK
0x5f = KEY_I # SQUARE/VIEW (XBMC recommendation: KEY_V)
0x5e = KEY_O # CROSS (XBMC recommendation: KEY_X)
0x54 = KEY_UP # UP
0x56 = KEY_DOWN # DOWN
0x57 = KEY_LEFT # LEFT
0x55 = KEY_RIGHT # RIGHT
0x0b = KEY_ENTER # ENTER
0x5a = KEY_PAGEUP # L1 (XBMC recommendation: KEY_F1)
0x58 = KEY_PAGEDOWN # L2 (XBMC recommendation: KEY_F2)
0x51 = KEY_TAB # L3 (XBMC recommendation: KEY_F3)
0x5b = KEY_HOME # R1 (XBMC recommendation: KEY_F4)
0x59 = KEY_END # R2 (XBMC recommendation: KEY_F5)
0x52 = KEY_H # R3 (XBMC recommendation: KEY_F6)
0x43 = KEY_HOMEPAGE # PS button
0x50 = KEY_Q # SELECT (XBMC recommendation: KEY_INSERT)
0x53 = KEY_W # START (XBMC recommendation: KEY_HOME)
0x33 = KEY_R # SCAN BACK (XBMC recommendation: KEY_R)
0x32 = KEY_PLAY # PLAY
0x34 = KEY_F # SCAN FORWARD (XBMC recommendation: KEY_F)
0x30 = KEY_COMMA # PREVIOUS (XBMC recommendationL KEY_PAGEUP)
0x38 = KEY_STOP # STOP
0x31 = KEY_PERIOD # NEXT (XBMC recommendation: KEY_PAGEDOWN)
0x60 = KEY_FRAMEBACK # SLOW/STEP BACK (XBMC recommendation: KEY_COMMA)
0x39 = KEY_SPACE # PAUSE
0x61 = KEY_DOT # SLOW/STEP FORWARD (XBMC recommendation: KEY_DOT)
0xff = KEY_MAX