2012-07-24, 19:31
I just wanted to say thank you for all your info!
between this and couple other site iv managed to get my setup running at 1360x768.... i can tell you it took some tinkering! (only been using linux for a few days)
im using onboard nvidia gforce 7025/nforce 630a and yes this was connected to my 32LG3000 via VGA running nvidia driver version 302.17 and im using ubuntu 10.04.
like some of the others i had MASSIVE overpan/scan or what ever ya call it so this is my xorg.conf settings..........
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu May 31 12:36:44 PDT 2012
Section "Monitor"
Identifier "Monitor0"
VendorName "LG"
ModelName "32LG3000"
HorizSync 31.0 - 67.0
VertRefresh 59.0 - 76.0
ModeLine "[email protected]" 84.72 1360 1424 1568 1776 768 769 772 795 -hsync +vsync
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Option "FlatPanelProperties" "Scaling = 1360x768"
Modes "1360x768"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# generated from default
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
Driver "nvidia"
Option "NoLogo" "True"
Option "ModeValidation" "NoEdidModes"
Option "DynamicTwinView" "Fasle"
EndSection
NOTICE i use Option "FlatPanelProperties" "Scaling = 1360x768" instead of Option "FlatPanelProperties" "Scaling = NATIVE"
i dont know if this will help anyone else out due to me using vga and only inputting enough info for 1 modeline
also one last thing i KNOW my modeline is NOT QUITE right as thats the numbers for the hmdi modeline but i thought sod it i will give it a try and it works, but if anyone can see and mistakes or anything that does not need to be included then please please let me know
many thanks again
paul
between this and couple other site iv managed to get my setup running at 1360x768.... i can tell you it took some tinkering! (only been using linux for a few days)
im using onboard nvidia gforce 7025/nforce 630a and yes this was connected to my 32LG3000 via VGA running nvidia driver version 302.17 and im using ubuntu 10.04.
like some of the others i had MASSIVE overpan/scan or what ever ya call it so this is my xorg.conf settings..........
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu May 31 12:36:44 PDT 2012
Section "Monitor"
Identifier "Monitor0"
VendorName "LG"
ModelName "32LG3000"
HorizSync 31.0 - 67.0
VertRefresh 59.0 - 76.0
ModeLine "[email protected]" 84.72 1360 1424 1568 1776 768 769 772 795 -hsync +vsync
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Option "FlatPanelProperties" "Scaling = 1360x768"
Modes "1360x768"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# generated from default
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
Driver "nvidia"
Option "NoLogo" "True"
Option "ModeValidation" "NoEdidModes"
Option "DynamicTwinView" "Fasle"
EndSection
NOTICE i use Option "FlatPanelProperties" "Scaling = 1360x768" instead of Option "FlatPanelProperties" "Scaling = NATIVE"
i dont know if this will help anyone else out due to me using vga and only inputting enough info for 1 modeline
also one last thing i KNOW my modeline is NOT QUITE right as thats the numbers for the hmdi modeline but i thought sod it i will give it a try and it works, but if anyone can see and mistakes or anything that does not need to be included then please please let me know
many thanks again
paul