2011-03-21, 22:35
I've been trying around some more, and may have something working.
First, I followed the first post of this thread.
Then I compiled the ir-keytable tool from git, as suggested here for an older version:
Afterwards, I ran the following commands to set the imon driver to MCE mode (as suggested here:
Now, I do get some readings with irw when I press keys on my Harmony One, which is configured as an MCE-1039. (Some keys don't yet produce results - Menu, Exit, Info, Guide, Play, Record, ... -, but I'll be looking into that later. The directions keys and Ok are working, which is quite good for a start.)
By the way, if there should still be an error with endless key repeats, there was a solution suggested by Dan Chase on the lirc mailinglist:
All of this would get me to the following commands in rc.local:
First, I followed the first post of this thread.
Then I compiled the ir-keytable tool from git, as suggested here for an older version:
Code:
cd /usr/local/src
git clone http://linuxtv.org/git/v4l-utils.git
cd v4l-utils
make
cd utils/keytable
cp ir-keytable /usr/local/bin/
cp rc_keymaps /etc/
Afterwards, I ran the following commands to set the imon driver to MCE mode (as suggested here:
Code:
ir-keytable -p rc6 -w /etc/rc_keymaps/imon_mce
echo rc6 > /sys/class/rc/rc0/protocols
Now, I do get some readings with irw when I press keys on my Harmony One, which is configured as an MCE-1039. (Some keys don't yet produce results - Menu, Exit, Info, Guide, Play, Record, ... -, but I'll be looking into that later. The directions keys and Ok are working, which is quite good for a start.)
By the way, if there should still be an error with endless key repeats, there was a solution suggested by Dan Chase on the lirc mailinglist:
Code:
ir-keytable -D 150 -P 250
All of this would get me to the following commands in rc.local:
Code:
modprobe imon
ir-keytable -p rc6 -w /etc/rc_keymaps/imon_mce -D 150 -P 250
echo rc6 > /sys/class/rc/rc0/protocols